Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
To: lgirdwood@gmail.com, broonie@kernel.org,
	pierre-louis.bossart@linux.intel.com
Cc: alsa-devel@alsa-project.org, ranjani.sridharan@linux.intel.com,
	kai.vehmanen@linux.intel.com
Subject: [PATCH 2/3] ASoC: SOF: Intel: hda-ipc: Do not process IPC reply before firmware boot
Date: Tue, 12 Jul 2022 15:23:56 +0300	[thread overview]
Message-ID: <20220712122357.31282-3-peter.ujfalusi@linux.intel.com> (raw)
In-Reply-To: <20220712122357.31282-1-peter.ujfalusi@linux.intel.com>

It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.

The issue was reported with IPC4 firmware but the same condition is present
for IPC3.

Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 sound/soc/sof/intel/hda-ipc.c | 39 ++++++++++++++++++++++-------------
 1 file changed, 25 insertions(+), 14 deletions(-)

diff --git a/sound/soc/sof/intel/hda-ipc.c b/sound/soc/sof/intel/hda-ipc.c
index f08011249955..65e688f749ea 100644
--- a/sound/soc/sof/intel/hda-ipc.c
+++ b/sound/soc/sof/intel/hda-ipc.c
@@ -148,17 +148,23 @@ irqreturn_t hda_dsp_ipc4_irq_thread(int irq, void *context)
 
 		if (primary & SOF_IPC4_MSG_DIR_MASK) {
 			/* Reply received */
-			struct sof_ipc4_msg *data = sdev->ipc->msg.reply_data;
+			if (likely(sdev->fw_state == SOF_FW_BOOT_COMPLETE)) {
+				struct sof_ipc4_msg *data = sdev->ipc->msg.reply_data;
 
-			data->primary = primary;
-			data->extension = extension;
+				data->primary = primary;
+				data->extension = extension;
 
-			spin_lock_irq(&sdev->ipc_lock);
+				spin_lock_irq(&sdev->ipc_lock);
 
-			snd_sof_ipc_get_reply(sdev);
-			snd_sof_ipc_reply(sdev, data->primary);
+				snd_sof_ipc_get_reply(sdev);
+				snd_sof_ipc_reply(sdev, data->primary);
 
-			spin_unlock_irq(&sdev->ipc_lock);
+				spin_unlock_irq(&sdev->ipc_lock);
+			} else {
+				dev_dbg_ratelimited(sdev->dev,
+						    "IPC reply before FW_READY: %#x|%#x\n",
+						    primary, extension);
+			}
 		} else {
 			/* Notification received */
 
@@ -225,16 +231,21 @@ irqreturn_t hda_dsp_ipc_irq_thread(int irq, void *context)
 		 * place, the message might not yet be marked as expecting a
 		 * reply.
 		 */
-		spin_lock_irq(&sdev->ipc_lock);
+		if (likely(sdev->fw_state == SOF_FW_BOOT_COMPLETE)) {
+			spin_lock_irq(&sdev->ipc_lock);
 
-		/* handle immediate reply from DSP core */
-		hda_dsp_ipc_get_reply(sdev);
-		snd_sof_ipc_reply(sdev, msg);
+			/* handle immediate reply from DSP core */
+			hda_dsp_ipc_get_reply(sdev);
+			snd_sof_ipc_reply(sdev, msg);
 
-		/* set the done bit */
-		hda_dsp_ipc_dsp_done(sdev);
+			/* set the done bit */
+			hda_dsp_ipc_dsp_done(sdev);
 
-		spin_unlock_irq(&sdev->ipc_lock);
+			spin_unlock_irq(&sdev->ipc_lock);
+		} else {
+			dev_dbg_ratelimited(sdev->dev, "IPC reply before FW_READY: %#x\n",
+					    msg);
+		}
 
 		ipc_irq = true;
 	}
-- 
2.37.0


  parent reply	other threads:[~2022-07-12 12:25 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-12 12:23 [PATCH 0/3] ASoC: SOF: Intel: Do not process IPC reply before firmware boot Peter Ujfalusi
2022-07-12 12:23 ` [PATCH 1/3] ASoC: SOF: Intel: cnl: " Peter Ujfalusi
2022-07-12 12:23 ` Peter Ujfalusi [this message]
2022-07-12 12:23 ` [PATCH 3/3] ASoC: SOF: Intel: mtl: " Peter Ujfalusi
2022-07-12 18:22 ` [PATCH 0/3] ASoC: SOF: Intel: " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220712122357.31282-3-peter.ujfalusi@linux.intel.com \
    --to=peter.ujfalusi@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=kai.vehmanen@linux.intel.com \
    --cc=lgirdwood@gmail.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=ranjani.sridharan@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox