[RFC PATCH 13/17] ASoC: SOF: Intel: Switch to new stream-format interface

[Cezary Rojewski <cezary.rojewski@intel.com>]

To provide option for selecting different bit-per-sample than just the
maximum one, use the new format calculation mechanism.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
---
 sound/soc/sof/intel/hda-dai-ops.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sof/intel/hda-dai-ops.c b/sound/soc/sof/intel/hda-dai-ops.c
index f3513796c189..00703999e91b 100644
--- a/sound/soc/sof/intel/hda-dai-ops.c
+++ b/sound/soc/sof/intel/hda-dai-ops.c
@@ -194,14 +194,15 @@ static unsigned int hda_calc_stream_format(struct snd_sof_dev *sdev,
 	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	unsigned int link_bps;
 	unsigned int format_val;
+	unsigned int bps;
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		link_bps = codec_dai->driver->playback.sig_bits;
 	else
 		link_bps = codec_dai->driver->capture.sig_bits;
+	bps = snd_hdac_stream_format_bps(params_format(params), SNDRV_PCM_SUBFORMAT_STD, link_bps);
 
-	format_val = snd_hdac_calc_stream_format(params_rate(params), params_channels(params),
-						 params_format(params), link_bps, 0);
+	format_val = snd_hdac_stream_format(params_channels(params), bps, params_rate(params));
 
 	dev_dbg(sdev->dev, "format_val=%#x, rate=%d, ch=%d, format=%d\n", format_val,
 		params_rate(params), params_channels(params), params_format(params));
-- 
2.25.1