[PATCH AUTOSEL 5.15 01/14] ASoC: simple-card: fixup asoc_simple_probe() error handling

[PATCH AUTOSEL 5.15 01/14] ASoC: simple-card: fixup asoc_simple_probe() error handling

[Sasha Levin]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit 41bae58df411f9accf01ea660730649b2fab1dab ]

asoc_simple_probe() is used for both "DT probe" (A) and "platform probe"
(B). It uses "goto err" when error case, but it is not needed for
"platform probe" case (B). Thus it is using "return" directly there.

	static int asoc_simple_probe(...)
	{
 ^		if (...) {
 |			...
(A)			if (ret < 0)
 |				goto err;
 v		} else {
 ^			...
 |			if (ret < 0)
(B)				return -Exxx;
 v		}

		...
 ^		if (ret < 0)
(C)			goto err;
 v		...

	err:
(D)		simple_util_clean_reference(card);

		return ret;
	}

Both case are using (C) part, and it calls (D) when err case.
But (D) will do nothing for (B) case.
Because of these behavior, current code itself is not wrong,
but is confusable, and more, static analyzing tool will warning on
(B) part (should use goto err).

To avoid static analyzing tool warning, this patch uses "goto err"
on (B) part.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7hy7mlh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/generic/simple-card.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index 283aa21879aa5..95e4c53cd90c7 100644
--- a/sound/soc/generic/simple-card.c
+++ b/sound/soc/generic/simple-card.c
@@ -680,10 +680,12 @@ static int asoc_simple_probe(struct platform_device *pdev)
 		struct snd_soc_dai_link *dai_link = priv->dai_link;
 		struct simple_dai_props *dai_props = priv->dai_props;
 
+		ret = -EINVAL;
+
 		cinfo = dev->platform_data;
 		if (!cinfo) {
 			dev_err(dev, "no info for asoc-simple-card\n");
-			return -EINVAL;
+			goto err;
 		}
 
 		if (!cinfo->name ||
@@ -692,7 +694,7 @@ static int asoc_simple_probe(struct platform_device *pdev)
 		    !cinfo->platform ||
 		    !cinfo->cpu_dai.name) {
 			dev_err(dev, "insufficient asoc_simple_card_info settings\n");
-			return -EINVAL;
+			goto err;
 		}
 
 		cpus			= dai_link->cpus;
-- 
2.40.1

[PATCH AUTOSEL 5.15 05/14] ALSA: usb-audio: Fix microphone sound on Opencomm2 Headset

[Sasha Levin]

From: WhaleChang <whalechang@google.com>

[ Upstream commit 6a83d6f3bb3c329a73e3483651fb77b78bac1878 ]

When a Opencomm2 Headset is connected to a Bluetooth USB dongle,
the audio playback functions properly, but the microphone does not work.

In the dmesg logs, there are messages indicating that the init_pitch
function fails when the capture process begins.

The microphone only functions when the ep pitch control is not set.

Toggling the pitch control off bypasses the init_piatch function
and allows the microphone to work.

Signed-off-by: WhaleChang <whalechang@google.com>
Link: https://lore.kernel.org/r/20231006044852.4181022-1-whalechang@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/quirks.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 8de572e774ddc..6d87f58d1b005 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1725,7 +1725,11 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
 		/* mic works only when ep packet size is set to wMaxPacketSize */
 		fp->attributes |= UAC_EP_CS_ATTR_FILL_MAX;
 		break;
-
+	case USB_ID(0x3511, 0x2b1e): /* Opencomm2 UC USB Bluetooth dongle */
+		/* mic works only when ep pitch control is not set */
+		if (stream == SNDRV_PCM_STREAM_CAPTURE)
+			fp->attributes &= ~UAC_EP_CS_ATTR_PITCH_CONTROL;
+		break;
 	}
 }
 
-- 
2.40.1