[PATCH AUTOSEL 5.4 02/11] bytcr_rt5640 : inverse jack detect for Archos 101 cesium

[PATCH AUTOSEL 5.4 02/11] bytcr_rt5640 : inverse jack detect for Archos 101 cesium

[Sasha Levin]

From: Thomas GENTY <tomlohave@gmail.com>

[ Upstream commit e3209a1827646daaab744aa6a5767b1f57fb5385 ]

When headphones are plugged in, they appear absent; when they are removed,
they appear present.
Add a specific entry in bytcr_rt5640 for this device

Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240608170251.99936-1-tomlohave@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index c740dec00f83b..057ecfe2c8b5c 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -465,6 +465,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ARCHOS 101 CESIUM"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_JD_NOT_INV |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
-- 
2.43.0

[PATCH AUTOSEL 5.4 03/11] ASoC: ti: davinci-mcasp: Set min period size using FIFO config

[Sasha Levin]

From: Jai Luthra <j-luthra@ti.com>

[ Upstream commit c5dcf8ab10606e76c1d8a0ec77f27d84a392e874 ]

The minimum period size was enforced to 64 as older devices integrating
McASP with EDMA used an internal FIFO of 64 samples.

With UDMA based platforms this internal McASP FIFO is optional, as the
DMA engine internally does some buffering which is already accounted for
when registering the platform. So we should read the actual FIFO
configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to
64.

Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-2-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/ti/davinci-mcasp.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c
index 0541071f454bd..9a182e4c7d572 100644
--- a/sound/soc/ti/davinci-mcasp.c
+++ b/sound/soc/ti/davinci-mcasp.c
@@ -1419,10 +1419,11 @@ static int davinci_mcasp_hw_rule_min_periodsize(
 {
 	struct snd_interval *period_size = hw_param_interval(params,
 						SNDRV_PCM_HW_PARAM_PERIOD_SIZE);
+	u8 numevt = *((u8 *)rule->private);
 	struct snd_interval frames;
 
 	snd_interval_any(&frames);
-	frames.min = 64;
+	frames.min = numevt;
 	frames.integer = 1;
 
 	return snd_interval_refine(period_size, &frames);
@@ -1437,6 +1438,7 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
 	u32 max_channels = 0;
 	int i, dir, ret;
 	int tdm_slots = mcasp->tdm_slots;
+	u8 *numevt;
 
 	/* Do not allow more then one stream per direction */
 	if (mcasp->substreams[substream->stream])
@@ -1536,9 +1538,12 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
 			return ret;
 	}
 
+	numevt = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			 &mcasp->txnumevt :
+			 &mcasp->rxnumevt;
 	snd_pcm_hw_rule_add(substream->runtime, 0,
 			    SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
-			    davinci_mcasp_hw_rule_min_periodsize, NULL,
+			    davinci_mcasp_hw_rule_min_periodsize, numevt,
 			    SNDRV_PCM_HW_PARAM_PERIOD_SIZE, -1);
 
 	return 0;
-- 
2.43.0

[PATCH AUTOSEL 5.4 04/11] ASoC: ti: omap-hdmi: Fix too long driver name

[Sasha Levin]

From: Primoz Fiser <primoz.fiser@norik.com>

[ Upstream commit 524d3f126362b6033e92cbe107ae2158d7fbff94 ]

Set driver name to "HDMI". This simplifies the code and gets rid of
the following error messages:

  ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e'

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240610125847.773394-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/ti/omap-hdmi.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/sound/soc/ti/omap-hdmi.c b/sound/soc/ti/omap-hdmi.c
index def2a0ce88863..e4f661c5349ef 100644
--- a/sound/soc/ti/omap-hdmi.c
+++ b/sound/soc/ti/omap-hdmi.c
@@ -353,11 +353,7 @@ static int omap_hdmi_audio_probe(struct platform_device *pdev)
 	if (!card)
 		return -ENOMEM;
 
-	card->name = devm_kasprintf(dev, GFP_KERNEL,
-				    "HDMI %s", dev_name(ad->dssdev));
-	if (!card->name)
-		return -ENOMEM;
-
+	card->name = "HDMI";
 	card->owner = THIS_MODULE;
 	card->dai_link =
 		devm_kzalloc(dev, sizeof(*(card->dai_link)), GFP_KERNEL);
-- 
2.43.0