From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000666]: Simply no sound ... no line ... no mixer
Date: Fri, 10 Dec 2004 22:08:14 +0100 [thread overview]
Message-ID: <3d2e19c1425047782cfb02e1d2874284@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=666>
======================================================================
Reported By: footcow
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 666
Category: PCI - azx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian
Kernel Version: 2.6.9
======================================================================
Date Submitted: 11-23-2004 01:31 CET
Last Modified: 12-10-2004 22:08 CET
======================================================================
Summary: Simply no sound ... no line ... no mixer
Description:
I have compiled the last release : 1.0.7 stable.
But I do not have any sound, no line ... no mixer ... :(
I have an AsusTek P5GD2 motherboard with lspci -v :
0000:00:1b.0 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High
Definition Audio Controller (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 813d
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at cccf4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [70]
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=10 [0091]
The snd_azx module is well loaded :
lsmod :
snd_azx 30920 1
snd_pcm 95112 1 snd_azx
snd_timer 25476 1 snd_pcm
snd 54500 5 snd_azx,snd_pcm,snd_timer
snd_page_alloc 10120 1 snd_pcm
If I run alsamixer I get this :
$ alsamixer
No mixer elems found
If I run alsamixergui, I get 3 columns:
Line is emplty and can't change
Same for Mic
I can only move values for a third column called Capt.
======================================================================
----------------------------------------------------------------------
tiwai - 12-09-04 12:11
----------------------------------------------------------------------
Also apply other two patches, too. (They are already on CVS.)
----------------------------------------------------------------------
footcow - 12-10-04 22:08
----------------------------------------------------------------------
So to answer your first question:
I get this message in dmesg only with the starting script of Alsa from
Debian.
Seems to be something like : (I 'll not copy all the script except if you
need it)
alsactl restore 2>&1
So I have get the last CVS update. Hope all your patch were applied on
it.
In dmesg after start Linux I get this now :
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/azx.c:789: azx_pcm_prepare:
bufsize=0x79f4, fragsize=0x116c, format=0x11
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x11
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x11
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x4, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x5, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x6, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x4, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x5, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x6, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/azx.c:789: azx_pcm_prepare:
bufsize=0x79f4, fragsize=0x116c, format=0x11
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x11
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x11
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x4, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x5, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x6, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x4, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x5, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x6, stream=0x0, channel=0, format=0x0
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/azx.c:789: azx_pcm_prepare:
bufsize=0x79f4, fragsize=0x116c, format=0x11
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x11
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x11
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/azx.c:789: azx_pcm_prepare:
bufsize=0x79f4, fragsize=0x116c, format=0x11
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x11
ALSA /usr/src/alsa-cvs/alsa-driver/pci/azx/hda_codec.c:455:
hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x11
Now Alsamixer is starting ...
I get this on the screen :
Card: ICH6 HDA
Chip: C-Media CMI9880
View: Playback
Item: PCM
And 4 draw bars :
PCM
Surround
Center
LFE
+
2 Input So but without bar
I can't change any parameters anywhere.
If I go to Input So and change one parameter I get a Seg Fault.
I'll upload you a snapshot of what I get.
the contents of /proc/asound/card0/codec#0 have changed I have now :
Codec: C-Media CMI9880
Address: 0
Vendor Id: 0x434d4980
Subsystem Id: 0x0
Revision Id: 0x90002
Default PCM: rates 0x540, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: 0x00 0x00
Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: 0x00 0x00
Node 0x05 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: 0x00 0x00
Node 0x06 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: 0x80 0x80
Node 0x07 [Audio Output] wcaps 0x615: Stereo Digital Amp-Out
Amp-Out caps: N/A
Amp-Out vals: 0x80 0x80
PCM: rates 0x000, bits 0x00, types 0x5
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x1e, stepsize=0x05, mute=1
Amp-In vals: 0x80 0x80
PCM: rates 0x160, bits 0x02, types 0x0
Connection: 9
0x0b 0x0c 0x0d 0x0e 0x0f 0x10 0x11 0x1f 0x20
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x1e, stepsize=0x05, mute=1
Amp-In vals: 0x80 0x80
PCM: rates 0x160, bits 0x02, types 0x0
Connection: 9
0x0b 0x0c 0x0d 0x0e 0x0f 0x10 0x11 0x1f 0x20
Node 0x0a [Audio Input] wcaps 0x100791: Stereo Digital
PCM: rates 0x160, bits 0x0e, types 0x0
Connection: 1
0x13
Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0833f: IN OUT HP
Pin Default 0x01014010: Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x03
Node 0x0c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0833f: IN OUT HP
Pin Default 0x01813000: Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x04
Node 0x0d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0833f: IN OUT HP
Pin Default 0x01a19000: Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x20: IN
Connection: 1
0x05
Node 0x0e [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x081033f: IN OUT HP
Pin Default 0x01011014: Line Out at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x06
Node 0x0f [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0833f: IN OUT HP
Pin Default 0x82214100: HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 4
0x03 0x04 0x05 0x06
Node 0x10 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0833f: IN OUT HP
Pin Default 0x82a19100: Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x20: IN
Connection: 4
0x03 0x04 0x05 0x06
Node 0x11 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0863: IN
Pin Default 0x19330000: CD at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x00:
Node 0x12 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x01450000: SPDIF Out at Ext Rear
Conn = Optical, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x07
Node 0x13 [Pin Complex] wcaps 0x400281: Stereo Digital
Pincap 0x0830: IN OUT
Pin Default 0x41150000: Speaker at Ext Rear
Conn = Optical, Color = Unknown
Pin-ctls: 0x00:
Node 0x14 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x19 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0833f: IN OUT HP
Pin Default 0x01016012: Line Out at Ext Rear
Conn = 1/8, Color = Orange
Pin-ctls: 0xc0: OUT HP
Connection: 4
0x03 0x04 0x05 0x06
Node 0x20 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0833f: IN OUT HP
Pin Default 0x01012016: Line Out at Ext Rear
Conn = 1/8, Color = Grey
Pin-ctls: 0x00:
Connection: 4
0x03 0x04 0x05 0x06
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: 0x0f
And ... I still do have any sound.
How can I help you then ?
I don't know if you could be interesting about this offer, but I can give
you an access to this PC from the Internet for making all the test you
need on it ! ... Just ask.
Thanks for your work !
Issue History
Date Modified Username Field Change
======================================================================
11-23-04 01:31 footcow New Issue
11-23-04 01:31 footcow Distribution => Debian
11-23-04 01:31 footcow Kernel Version => 2.6.9
11-23-04 21:49 footcow Note Added: 0002530
12-08-04 19:54 tiwai Note Added: 0002791
12-08-04 23:56 footcow Note Added: 0002795
12-09-04 11:27 tiwai Note Added: 0002799
12-09-04 11:33 tiwai File Added: hda-query-fix.diff
12-09-04 11:34 tiwai Note Added: 0002800
12-09-04 12:11 tiwai Note Added: 0002801
12-09-04 12:12 tiwai File Added: hda-loopback-fix.diff
12-09-04 12:12 tiwai File Added: hda-proc-amp.diff
12-10-04 22:08 footcow Note Added: 0002808
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
next reply other threads:[~2004-12-10 21:08 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-10 21:08 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-05-31 16:01 [ALSA - driver 0000666]: Simply no sound ... no line ... no mixer bugtrack
2005-01-19 16:14 bugtrack
2005-01-14 23:21 bugtrack
2005-01-11 15:14 bugtrack
2005-01-08 0:22 bugtrack
2005-01-07 17:04 bugtrack
2005-01-06 23:44 bugtrack
2004-12-16 20:06 bugtrack
2004-12-16 17:32 bugtrack
2004-12-11 23:58 bugtrack
2004-12-11 16:40 bugtrack
2004-12-09 11:11 bugtrack
2004-12-09 10:34 bugtrack
2004-12-09 10:27 bugtrack
2004-12-08 22:56 bugtrack
2004-12-08 18:54 bugtrack
2004-11-23 20:49 bugtrack
2004-11-23 0:31 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3d2e19c1425047782cfb02e1d2874284@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox