From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000666]: Simply no sound ... no line ... no mixer
Date: Fri, 7 Jan 2005 18:04:18 +0100 [thread overview]
Message-ID: <6b83c7dff31f2ac67527fad6b6512772@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=666>
======================================================================
Reported By: footcow
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 666
Category: PCI - azx
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian
Kernel Version: 2.6.9
======================================================================
Date Submitted: 11-23-2004 01:31 CET
Last Modified: 01-07-2005 18:04 CET
======================================================================
Summary: Simply no sound ... no line ... no mixer
Description:
I have compiled the last release : 1.0.7 stable.
But I do not have any sound, no line ... no mixer ... :(
I have an AsusTek P5GD2 motherboard with lspci -v :
0000:00:1b.0 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High
Definition Audio Controller (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 813d
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at cccf4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [70]
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=10 [0091]
The snd_azx module is well loaded :
lsmod :
snd_azx 30920 1
snd_pcm 95112 1 snd_azx
snd_timer 25476 1 snd_pcm
snd 54500 5 snd_azx,snd_pcm,snd_timer
snd_page_alloc 10120 1 snd_pcm
If I run alsamixer I get this :
$ alsamixer
No mixer elems found
If I run alsamixergui, I get 3 columns:
Line is emplty and can't change
Same for Mic
I can only move values for a third column called Capt.
======================================================================
----------------------------------------------------------------------
footcow - 01-07-05 00:44
----------------------------------------------------------------------
Since v1.0.8rc2 I get now again no sound ...
I get this message in my dmesg after KDE start (start of ARTS !?)
ALSA /usr/src/alsa-cvs/alsa-driver/acore/pcm_native.c:1872: BUG? (err >=
0) (called from f8b19f16)
ALSA /usr/src/alsa-cvs/alsa-driver/acore/pcm_native.c:2011:
snd_pcm_hw_constraints_complete failed
Each time I try to change ALSA to OSS or OSS to ALSA I get those line
appearing in the dmesg.
Alsamixer run, but ARTS do not want to start .. so no sound again !
----------------------------------------------------------------------
tiwai - 01-07-05 18:04
----------------------------------------------------------------------
Try the attached patch (azx-debug.diff) and check what error messages
appear?
Issue History
Date Modified Username Field Change
======================================================================
11-23-04 01:31 footcow New Issue
11-23-04 01:31 footcow Distribution => Debian
11-23-04 01:31 footcow Kernel Version => 2.6.9
11-23-04 21:49 footcow Note Added: 0002530
12-08-04 19:54 tiwai Note Added: 0002791
12-08-04 23:56 footcow Note Added: 0002795
12-09-04 11:27 tiwai Note Added: 0002799
12-09-04 11:33 tiwai File Added: hda-query-fix.diff
12-09-04 11:34 tiwai Note Added: 0002800
12-09-04 12:11 tiwai Note Added: 0002801
12-09-04 12:12 tiwai File Added: hda-loopback-fix.diff
12-09-04 12:12 tiwai File Added: hda-proc-amp.diff
12-10-04 22:08 footcow Note Added: 0002808
12-10-04 22:08 footcow File Added: alsamix.png
12-11-04 17:40 tiwai Note Added: 0002811
12-12-04 00:58 footcow Note Added: 0002813
12-12-04 00:59 footcow File Added: alsamix2.png
12-16-04 18:32 tiwai Note Added: 0002836
12-16-04 21:06 footcow Note Added: 0002841
01-07-05 00:44 footcow Note Added: 0003099
01-07-05 18:04 tiwai Note Added: 0003107
======================================================================
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
next reply other threads:[~2005-01-07 17:04 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-07 17:04 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-05-31 16:01 [ALSA - driver 0000666]: Simply no sound ... no line ... no mixer bugtrack
2005-01-19 16:14 bugtrack
2005-01-14 23:21 bugtrack
2005-01-11 15:14 bugtrack
2005-01-08 0:22 bugtrack
2005-01-06 23:44 bugtrack
2004-12-16 20:06 bugtrack
2004-12-16 17:32 bugtrack
2004-12-11 23:58 bugtrack
2004-12-11 16:40 bugtrack
2004-12-10 21:08 bugtrack
2004-12-09 11:11 bugtrack
2004-12-09 10:34 bugtrack
2004-12-09 10:27 bugtrack
2004-12-08 22:56 bugtrack
2004-12-08 18:54 bugtrack
2004-11-23 20:49 bugtrack
2004-11-23 0:31 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6b83c7dff31f2ac67527fad6b6512772@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox