Re: Envy24Control and wordclock

Re: Envy24Control and wordclock

[Ludwig Schwardt]

I had the same problem syncing three M-Audio Delta 1010LTs. The Delta 
1010LT can sync via dedicated word clock or S/PDIF, but neither option 
seemed to work under envy24control. Jaroslav released a patch for 
envy24control on this list (message dated 19 Feb 2004) to add the "word 
clock" option for Delta 1010LT - maybe the Terratec needs something similar?

Unfortunately I still couldn't sync the cards with the patched version 
(no word clock or S/PDIF syncing).

Ludwig


-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
>From Windows to Linux, servers to mobile, InstallShield X is the
one installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504

Re: Envy24Control and wordclock

[Tommi Sakari Uimonen]

> Unfortunately I still couldn't sync the cards with the patched version
> (no word clock or S/PDIF syncing).

I've successfully synced 1010LT and Audiophile 2496 through S/PDIF, both
ways; 1010LT master, 2496 slave & 2496 master, 1010LT slave

The master sets its clock to eg. 96000 and the slave to S/PDIF. The
S/PDIF's must be connected of course with cable (master out->slave in)

Tommi


-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
>From Windows to Linux, servers to mobile, InstallShield X is the
one installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504

Envy24Control and wordclock

[Michele Spinolo]

[-- Attachment #1: Type: text/plain, Size: 614 bytes --]

Hi guys,

I installed 3 Terratec EWS88D in my system, which are properly recognized
and now, after some work, work fine.

Using the command envy24control -c x (x=0,1,2) I can manage HW settings of
different soundcards, bun under "hardware settings", "master clock" I can't
find "wordclock" option which permits to sync the different boards.
The boards are connected by their internal wordclock propetary cable, the
problem seems the driver or envy24control do not recognize this option the
soundcard has.

Thanks!
Michele

P.S. Sorry If I double posted, but I had a problem with my mail server!:-(

[-- Attachment #2: Type: text/html, Size: 969 bytes --]

Re: Envy24Control and wordclock

[Jan Depner]

Just curious, I've got the ST Audio DSP 2000 and it uses S/PDIF to
sync.  Does the EWS use the same method?  If so you should set card 0's
Master Clock to whatever you want it to be and then the other two should
be set to S/PDIF In.  If the EWS doesn't use S/PDIF for sync I don't
know what you should do.  I don't have "word clock" under Master Clock
either.

Jan


On Sun, 2004-06-13 at 11:38, Michele Spinolo wrote:
> Hi guys,
> 
> I installed 3 Terratec EWS88D in my system, which are properly
> recognized
> and now, after some work, work fine.
> 
> Using the command envy24control -c x (x=0,1,2) I can manage HW
> settings of
> different soundcards, bun under "hardware settings", "master clock" I
> can't
> find "wordclock" option which permits to sync the different boards.
> The boards are connected by their internal wordclock propetary cable,
> the
> problem seems the driver or envy24control do not recognize this option
> the
> soundcard has.
> 
> Thanks!
> Michele
> 
> P.S. Sorry If I double posted, but I had a problem with my mail
> server!:-(
> 
> 



-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
>From Windows to Linux, servers to mobile, InstallShield X is the
one installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504

Envy24Control and wordclock

[Michele Spinolo]

[-- Attachment #1: Type: text/plain, Size: 529 bytes --]

Hi guys,

I installed 3 Terratec EWS88D in my system, which are properly recognized and now, after some work, work fine.

Using the command envy24control -c x (x=0,1,2) I can manage HW settings of different soundcards, bun under "hardware settings", "master clock" I can't find "wordclock" option which permits to sync the different boards.
The boards are connected by their internal wordclock propetary cable, the problem seems the driver or envy24control do not recognize this option the soundcard has.

Thanks!
Michele

[-- Attachment #2: Type: text/html, Size: 1221 bytes --]