From: Mark Salazar <markTheCoder@justmyself.net>
To: alsa-devel@lists.sourceforge.net
Subject: [es18xx.c PATCH] #1/4 for Zoom Video - resolve common vs chipset specific mixer controls
Date: Mon, 26 Dec 2005 10:44:50 -0500 [thread overview]
Message-ID: <43B00FF2.6030007@justmyself.net> (raw)
First of 4 es18xx.c patches culminating in Zoom Video support.
While adding support for Zoom Video to the es18xx driver I found some of
the mixer controls
were wrong. Since you guys went to the trouble of supplying the
datasheets for the supported
chipsets I did a review of all of them and tried to get es18xx.c to
accurately reflect the
proper mixer controls for each chipset. If the datasheets are wrong then
so are my patches.
This first patch moves some controls from the common-to-all-chipsets array
'snd_es18xx_base_controls' to a chipset-specific array and adds code to
manage that new array.
Also while testing on my ES1878 test machine I discovered it needed a
couple of udelays in
the identify function so those are in this patch as well.
Testing:
This work was initially done on the source from the Debian Sarge ALSA
package, then tested
on an ES1879 and an ES1878 machine. Patches were created against the
Sarge code and then edited
to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs
code was test for
successful compilation. No additional testing was done on the ALSA cvs
version.
Applying:
cd alsa-driver/
cat ../../es18xx.CVSmod1.diff | patch -p1
Signed-off-by: Mark Salazar <markTheCoder@justmyself.net>
------
diff -Nur ../alsa-driver/alsa-kernel/isa/es18xx.c ./alsa-kernel/isa/es18xx.c
--- ../alsa-driver/alsa-kernel/isa/es18xx.c 2004-12-15
10:26:10.000000000 -0500
+++ ./alsa-kernel/isa/es18xx.c 2005-12-10 13:59:30.000000000 -0500
@@ -1181,19 +1181,22 @@
return change;
}
+/* Mixer controls
+ * These arrays contain setup data for mixer controls.
+ *
+ * The controls that are universal to all chipsets are fully initialized
+ * here.
+ */
static struct snd_kcontrol_new snd_es18xx_base_controls[] = {
ES18XX_DOUBLE("Master Playback Volume", 0, 0x60, 0x62, 0, 0, 63, 0),
ES18XX_DOUBLE("Master Playback Switch", 0, 0x60, 0x62, 6, 6, 1, 1),
ES18XX_DOUBLE("Line Playback Volume", 0, 0x3e, 0x3e, 4, 0, 15, 0),
ES18XX_DOUBLE("CD Playback Volume", 0, 0x38, 0x38, 4, 0, 15, 0),
ES18XX_DOUBLE("FM Playback Volume", 0, 0x36, 0x36, 4, 0, 15, 0),
-ES18XX_DOUBLE("Mono Playback Volume", 0, 0x6d, 0x6d, 4, 0, 15, 0),
ES18XX_DOUBLE("Mic Playback Volume", 0, 0x1a, 0x1a, 4, 0, 15, 0),
ES18XX_DOUBLE("Aux Playback Volume", 0, 0x3a, 0x3a, 4, 0, 15, 0),
-ES18XX_SINGLE("PC Speaker Playback Volume", 0, 0x3c, 0, 7, 0),
ES18XX_SINGLE("Record Monitor", 0, 0xa8, 3, 1, 0),
ES18XX_DOUBLE("Capture Volume", 0, 0xb4, 0xb4, 4, 0, 15, 0),
-ES18XX_SINGLE("Capture Switch", 0, 0x1c, 4, 1, 1),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
@@ -1203,19 +1206,34 @@
}
};
-static struct snd_kcontrol_new snd_es18xx_mono_in_control =
-ES18XX_DOUBLE("Mono Input Playback Volume", 0, 0x6d, 0x6d, 4, 0, 15, 0);
-
static struct snd_kcontrol_new snd_es18xx_recmix_controls[] = {
ES18XX_DOUBLE("PCM Capture Volume", 0, 0x69, 0x69, 4, 0, 15, 0),
ES18XX_DOUBLE("Mic Capture Volume", 0, 0x68, 0x68, 4, 0, 15, 0),
ES18XX_DOUBLE("Line Capture Volume", 0, 0x6e, 0x6e, 4, 0, 15, 0),
ES18XX_DOUBLE("FM Capture Volume", 0, 0x6b, 0x6b, 4, 0, 15, 0),
-ES18XX_DOUBLE("Mono Capture Volume", 0, 0x6f, 0x6f, 4, 0, 15, 0),
ES18XX_DOUBLE("CD Capture Volume", 0, 0x6a, 0x6a, 4, 0, 15, 0),
ES18XX_DOUBLE("Aux Capture Volume", 0, 0x6c, 0x6c, 4, 0, 15, 0)
};
+/*
+ * These chipset specific mixer controls are initialized in
+ * snd_es18xx_mixer. Those controls which are not UNSET are then
+ * instantiated.
+ */
+static char UNSETbuf = '\0';
+#define UNSET ((char *)&UNSETbuf)
+static enum optionalControlsIndex {reg1cBit4, reg3cMono, reg6d, reg6f};
+static struct snd_kcontrol_new snd_es18xx_optional_controls[] = {
+ES18XX_SINGLE(UNSET, 0, 0x1c, 4, 1, 1),
+ES18XX_SINGLE(UNSET, 0, 0x3c, 0, 7, 0),
+ES18XX_DOUBLE(UNSET, 0, 0x6d, 0x6d, 4, 0, 15, 0),
+ES18XX_DOUBLE(UNSET, 0, 0x6f, 0x6f, 4, 0, 15, 0)
+};
+static char* captureSwitchName = "Capture Switch";
+static char* speakerPlayName = "PC Speaker Playback Volume";
+static char* monoPlayName = "Mono Playback Volume";
+static char* monoRecName = "Mono Capture Volume";
+
static struct snd_kcontrol_new snd_es18xx_pcm1_controls[] = {
ES18XX_DOUBLE("PCM Playback Volume", 0, 0x14, 0x14, 4, 0, 15, 0),
};
@@ -1466,11 +1484,14 @@
}
outb(0x40, chip->port + 0x04);
+ udelay(10);
hi = inb(chip->port + 0x05);
+ udelay(10);
lo = inb(chip->port + 0x05);
if (hi != lo) {
chip->version = hi << 8 | lo;
chip->ctrl_port = inb(chip->port + 0x05) << 8;
+ udelay(10);
chip->ctrl_port += inb(chip->port + 0x05);
if ((chip->res_ctrl_port = request_region(chip->ctrl_port, 8,
"ES18xx - CTRL")) == NULL) {
@@ -1781,10 +1802,6 @@
}
}
- if (chip->caps & ES18XX_MONO) {
- if ((err = snd_ctl_add(card,
snd_ctl_new1(&snd_es18xx_mono_in_control, chip))) < 0)
- return err;
- }
if (chip->caps & ES18XX_RECMIX) {
for (idx = 0; idx < ARRAY_SIZE(snd_es18xx_recmix_controls);
idx++) {
if ((err = snd_ctl_add(card,
snd_ctl_new1(&snd_es18xx_recmix_controls[idx], chip))) < 0)
@@ -1822,6 +1839,24 @@
}
}
+/* finish initializing other chipset specific controls
+ */
+ if (chip->version != 0x1868) {
+ snd_es18xx_optional_controls[reg3cMono].name = speakerPlayName;
+ }
+ switch (chip->version) {
+ case 0x1869:
+ snd_es18xx_optional_controls[reg1cBit4].name = captureSwitchName;
+ snd_es18xx_optional_controls[reg6d].name = monoPlayName;
+ snd_es18xx_optional_controls[reg6f].name = monoRecName;
+ break;
+ }
+ for (idx = 0; idx < ARRAY_SIZE(snd_es18xx_optional_controls); idx++) {
+ if (snd_es18xx_optional_controls[idx].name == UNSET)
+ continue;
+ if ((err = snd_ctl_add(card,
snd_ctl_new1(&snd_es18xx_optional_controls[idx], chip))) < 0)
+ return err;
+ }
return 0;
}
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
next reply other threads:[~2005-12-26 15:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-26 15:44 Mark Salazar [this message]
2005-12-26 16:07 ` [es18xx.c PATCH] #1/4 for Zoom Video - resolve common vs chipset specific mixer controls Lee Revell
2005-12-26 17:36 ` Mark Salazar
2005-12-26 17:46 ` Lee Revell
2006-01-02 14:22 ` Takashi Iwai
2006-01-08 23:01 ` Mark Salazar
2006-01-09 12:13 ` Takashi Iwai
2006-01-10 0:58 ` Mark Salazar
[not found] ` <s5hu0ccfgu6.wl%tiwai@suse.de>
2006-01-15 20:30 ` Mark Salazar
2006-01-16 11:43 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43B00FF2.6030007@justmyself.net \
--to=markthecoder@justmyself.net \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox