* Problem with USB headset
@ 2006-02-03 17:32 Daniel Frey
2006-02-03 17:48 ` Lee Revell
0 siblings, 1 reply; 8+ messages in thread
From: Daniel Frey @ 2006-02-03 17:32 UTC (permalink / raw)
To: alsa-devel
Hello,
I have a problem with my USB headset. A short summary:
It doesn't support sample rates of 8000, but it does support 16000. Some
applications (e.g. Ekiga) try to access it with 8000, so they fail. The
Ekiga developer(s) think, the translation/conversion should be handled
by ALSA.
The details can be found here:
<http://bugzilla.gnome.org/show_bug.cgi?id=329609>
Question: Is their claim valid? Should I file a bug report to ALSA?
Regards, Daniel
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Problem with USB headset
2006-02-03 17:32 Problem with USB headset Daniel Frey
@ 2006-02-03 17:48 ` Lee Revell
2006-02-03 18:10 ` Daniel Frey
0 siblings, 1 reply; 8+ messages in thread
From: Lee Revell @ 2006-02-03 17:48 UTC (permalink / raw)
To: Daniel Frey; +Cc: alsa-devel
On Fri, 2006-02-03 at 18:32 +0100, Daniel Frey wrote:
> Hello,
>
> I have a problem with my USB headset. A short summary:
>
> It doesn't support sample rates of 8000, but it does support 16000. Some
> applications (e.g. Ekiga) try to access it with 8000, so they fail. The
> Ekiga developer(s) think, the translation/conversion should be handled
> by ALSA.
>
> The details can be found here:
>
> <http://bugzilla.gnome.org/show_bug.cgi?id=329609>
>
> Question: Is their claim valid? Should I file a bug report to ALSA?
>
If you are getting "cannot submit datapipe for urb 0, err = -28" then it
means you MUST have enabled USB bandwidth checking. Please make sure
it's really disabled.
Try:
$ grep CONFIG_USB_BANDWIDTH /boot/config-`uname -r`
Lee
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Problem with USB headset
2006-02-03 17:48 ` Lee Revell
@ 2006-02-03 18:10 ` Daniel Frey
2006-02-03 18:14 ` Lee Revell
0 siblings, 1 reply; 8+ messages in thread
From: Daniel Frey @ 2006-02-03 18:10 UTC (permalink / raw)
To: Lee Revell; +Cc: alsa-devel
Lee Revell wrote:
> On Fri, 2006-02-03 at 18:32 +0100, Daniel Frey wrote:
>
> If you are getting "cannot submit datapipe for urb 0, err = -28" then it
> means you MUST have enabled USB bandwidth checking. Please make sure
> it's really disabled.
>
> Try:
>
> $ grep CONFIG_USB_BANDWIDTH /boot/config-`uname -r`
>
> Lee
daniel@nemesis:~$ grep CONFIG_USB_BANDWIDTH /boot/config-`uname -r`
# CONFIG_USB_BANDWIDTH is not set
daniel@nemesis:~$
OK?
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Problem with USB headset
2006-02-03 18:10 ` Daniel Frey
@ 2006-02-03 18:14 ` Lee Revell
2006-02-03 18:57 ` Daniel Frey
0 siblings, 1 reply; 8+ messages in thread
From: Lee Revell @ 2006-02-03 18:14 UTC (permalink / raw)
To: Daniel Frey; +Cc: alsa-devel
On Fri, 2006-02-03 at 19:10 +0100, Daniel Frey wrote:
> Lee Revell wrote:
> > On Fri, 2006-02-03 at 18:32 +0100, Daniel Frey wrote:
> >
> > If you are getting "cannot submit datapipe for urb 0, err = -28" then it
> > means you MUST have enabled USB bandwidth checking. Please make sure
> > it's really disabled.
> >
> > Try:
> >
> > $ grep CONFIG_USB_BANDWIDTH /boot/config-`uname -r`
> >
> > Lee
>
> daniel@nemesis:~$ grep CONFIG_USB_BANDWIDTH /boot/config-`uname -r`
> # CONFIG_USB_BANDWIDTH is not set
> daniel@nemesis:~$
>
> OK?
>
OK, that's completely bizarre, and I've never seen another case like it.
Also, plughw should handle all sample rate conversion, it's very strange
that alsa-lib resampling fails...
Lee
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Problem with USB headset
2006-02-03 18:14 ` Lee Revell
@ 2006-02-03 18:57 ` Daniel Frey
2006-02-03 19:10 ` Daniel Frey
2006-02-03 19:14 ` Lee Revell
0 siblings, 2 replies; 8+ messages in thread
From: Daniel Frey @ 2006-02-03 18:57 UTC (permalink / raw)
To: Lee Revell; +Cc: alsa-devel
Lee Revell wrote:
> On Fri, 2006-02-03 at 19:10 +0100, Daniel Frey wrote:
>
>>Lee Revell wrote:
>>
>>>On Fri, 2006-02-03 at 18:32 +0100, Daniel Frey wrote:
>>>
>>>If you are getting "cannot submit datapipe for urb 0, err = -28" then it
>>>means you MUST have enabled USB bandwidth checking. Please make sure
>>>it's really disabled.
>>>
>>>Try:
>>>
>>>$ grep CONFIG_USB_BANDWIDTH /boot/config-`uname -r`
>>
>>daniel@nemesis:~$ grep CONFIG_USB_BANDWIDTH /boot/config-`uname -r`
>># CONFIG_USB_BANDWIDTH is not set
>>daniel@nemesis:~$
>>
>>OK?
>
> OK, that's completely bizarre, and I've never seen another case like it.
> Also, plughw should handle all sample rate conversion, it's very strange
> that alsa-lib resampling fails...
I guess it can only handle sample rate conversion when it knows that it
has to do sample rate conversion. So, maybe the hardware reports the
wrong sample rates?
Here's some output from lsusb -v, which (to me) seems to say: "Hey, I
can do 8000". What it doesn't say is "I can do 16000", but that may be
handled correctly by converting some other sample rate to 16000.
Bus 001 Device 005: ID 046d:0a02 Logitech, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0x0a02
bcdDevice 10.12
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 343
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 1 Control Device
bInterfaceProtocol 0
iInterface 0
AudioControl Interface Descriptor:
bLength 10
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 117
bInCollection 2
baInterfaceNr( 0) 1
baInterfaceNr( 1) 2
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 13
wTerminalType 0x0201 Microphone
bAssocTerminal 0
bNrChannels 1
wChannelConfig 0x0001
Left Front (L)
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 6
bSourceID 13
bControlSize 1
bmaControls( 0) 0x03
Mute
Volume
bmaControls( 1) 0x00
iFeature 0
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 12
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bNrChannels 2
wChannelConfig 0x0003
Left Front (L)
Right Front (R)
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 4 (MIXER_UNIT)
bUnitID 9
bNrInPins 2
baSourceID( 0) 12
baSourceID( 1) 6
bNrChannels 2
wChannelConfig 0x0003
Left Front (L)
Right Front (R)
iChannelNames 0
bmControls 0x00
iMixer 0
AudioControl Interface Descriptor:
bLength 10
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 1
bSourceID 9
bControlSize 1
bmaControls( 0) 0x01
Mute
bmaControls( 1) 0x02
Volume
bmaControls( 2) 0x02
Volume
iFeature 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 14
wTerminalType 0x0301 Speaker
bAssocTerminal 0
bSourceID 1
iTerminal 0
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 11
wTerminalType 0x0201 Microphone
bAssocTerminal 0
bNrChannels 1
wChannelConfig 0x0001
Left Front (L)
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 2
bSourceID 11
bControlSize 1
bmaControls( 0) 0x03
Mute
Volume
bmaControls( 1) 0x00
iFeature 0
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 4 (MIXER_UNIT)
bUnitID 7
bNrInPins 1
baSourceID( 0) 2
bNrChannels 1
wChannelConfig 0x0001
Left Front (L)
iChannelNames 0
bmControls 0x00
iMixer 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 10
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 7
iTerminal 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 12
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 23
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 2
bSubframeSize 2
bBitResolution 16
bSamFreqType 5 Discrete
tSamFreq[ 0] 8000
tSamFreq[ 1] 11025
tSamFreq[ 2] 22050
tSamFreq[ 3] 44100
tSamFreq[ 4] 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x00c0 1x 192 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 12
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 23
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 5 Discrete
tSamFreq[ 0] 8000
tSamFreq[ 1] 11025
tSamFreq[ 2] 22050
tSamFreq[ 3] 44100
tSamFreq[ 4] 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x0060 1x 96 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 10
bDelay 0 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 23
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 5 Discrete
tSamFreq[ 0] 8000
tSamFreq[ 1] 11025
tSamFreq[ 2] 22050
tSamFreq[ 3] 44100
tSamFreq[ 4] 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x0060 1x 96 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 2 Decoded PCM samples
wLockDelay 1 Decoded PCM samples
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 57
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 8
Anything else I could do?
Regards, Daniel
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Problem with USB headset
2006-02-03 18:57 ` Daniel Frey
@ 2006-02-03 19:10 ` Daniel Frey
2006-02-03 19:16 ` Lee Revell
2006-02-03 19:14 ` Lee Revell
1 sibling, 1 reply; 8+ messages in thread
From: Daniel Frey @ 2006-02-03 19:10 UTC (permalink / raw)
To: alsa-devel
Daniel Frey wrote:
> I guess it can only handle sample rate conversion when it knows that it
> has to do sample rate conversion. So, maybe the hardware reports the
> wrong sample rates?
Seconds after I wrote that, I had another idea. I plugged the headset
out of the monitor's hub and into the PC directly. Now it does work with
8000. Obviously, that's just a work-around, not a solution. And I'm not
sure what that means for you, though :)
Daniel
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Re: Problem with USB headset
2006-02-03 19:10 ` Daniel Frey
@ 2006-02-03 19:16 ` Lee Revell
0 siblings, 0 replies; 8+ messages in thread
From: Lee Revell @ 2006-02-03 19:16 UTC (permalink / raw)
To: Daniel Frey; +Cc: alsa-devel
On Fri, 2006-02-03 at 20:10 +0100, Daniel Frey wrote:
> Daniel Frey wrote:
> > I guess it can only handle sample rate conversion when it knows that it
> > has to do sample rate conversion. So, maybe the hardware reports the
> > wrong sample rates?
>
> Seconds after I wrote that, I had another idea. I plugged the headset
> out of the monitor's hub and into the PC directly. Now it does work with
> 8000. Obviously, that's just a work-around, not a solution. And I'm not
> sure what that means for you, though :)
Bug in the USB subsystem, probably. Try the latest kernel.
Lee
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Problem with USB headset
2006-02-03 18:57 ` Daniel Frey
2006-02-03 19:10 ` Daniel Frey
@ 2006-02-03 19:14 ` Lee Revell
1 sibling, 0 replies; 8+ messages in thread
From: Lee Revell @ 2006-02-03 19:14 UTC (permalink / raw)
To: Daniel Frey; +Cc: alsa-devel
On Fri, 2006-02-03 at 19:57 +0100, Daniel Frey wrote:
>
> Anything else I could do?
Wait for someone to fix it...
Lee
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2006-02-03 19:16 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-02-03 17:32 Problem with USB headset Daniel Frey
2006-02-03 17:48 ` Lee Revell
2006-02-03 18:10 ` Daniel Frey
2006-02-03 18:14 ` Lee Revell
2006-02-03 18:57 ` Daniel Frey
2006-02-03 19:10 ` Daniel Frey
2006-02-03 19:16 ` Lee Revell
2006-02-03 19:14 ` Lee Revell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox