* Re: [BUG] 2.6.16.2 (like olders) fails to suspend audio device [not found] <4437BB29.8050502@gmail.com> @ 2006-04-08 16:27 ` Lee Revell 2006-04-08 16:53 ` Patrizio Bassi 0 siblings, 1 reply; 2+ messages in thread From: Lee Revell @ 2006-04-08 16:27 UTC (permalink / raw) To: patrizio.bassi; +Cc: Kernel,, alsa-devel It would help if you cc'ed the right list (added) On Sat, 2006-04-08 at 15:31 +0200, Patrizio Bassi wrote: > I've already posted same bug some weeks ago. > > this is just a reminder and to confirm bug is still there. > > 00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) > > Alsa driver: 1370 > > 1) if builtin in kernel, on resume it doesn't work any more. > 2) if built as module on resume it works with no need to remove/readd > module. > > in both situations dmesg shows: > > pnp: Failed to activate device 00:0b. > > > Stopping tasks: ===========================================| > Shrinking memory... done (39214 pages freed) > pnp: Device 00:0c disabled. > pnp: Device 00:08 disabled. > swsusp: Need to copy 13752 pages > ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low) > -> IRQ 9 > ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level, low) > -> IRQ 9 > ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level, low) > -> IRQ 9 > ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) > -> IRQ 5 > ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKD] -> GSI 9 (level, low) > -> IRQ 9 > ACPI: PCI Interrupt 0000:00:0a.2[C] -> Link [LNKA] -> GSI 11 (level, > low) -> IRQ 11 > usb usb1: root hub lost power or was reset > ehci_hcd 0000:00:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 > ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, > low) -> IRQ 10 > pnp: Device 00:08 activated. > pnp: Failed to activate device 00:0b. > pnp: Device 00:0c activated. > Restarting tasks... done > agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0. > agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode > agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode > > lspci > 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host > bridge (rev 03) > 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP > bridge (rev 03) > 00:04.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) > 00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) > 00:04.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) > 00:04.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) > 00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] > (rev 74) > 00:0a.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 50) > 00:0a.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 50) > 00:0a.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) > 00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) > 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF/SG AGP > > > dmesg says 00:08 and 00:0c are activated..but i've no idea which devices > they are, lspci -vv shows nothing about that. > > Ready to give more infos and test patches. > > Patrizio Bassi > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 ^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [BUG] 2.6.16.2 (like olders) fails to suspend audio device 2006-04-08 16:27 ` [BUG] 2.6.16.2 (like olders) fails to suspend audio device Lee Revell @ 2006-04-08 16:53 ` Patrizio Bassi 0 siblings, 0 replies; 2+ messages in thread From: Patrizio Bassi @ 2006-04-08 16:53 UTC (permalink / raw) To: Lee Revell; +Cc: Kernel,, alsa-devel Lee Revell ha scritto: > It would help if you cc'ed the right list (added) > > On Sat, 2006-04-08 at 15:31 +0200, Patrizio Bassi wrote: > >> I've already posted same bug some weeks ago. >> >> this is just a reminder and to confirm bug is still there. >> >> 00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) >> >> Alsa driver: 1370 >> >> 1) if builtin in kernel, on resume it doesn't work any more. >> 2) if built as module on resume it works with no need to remove/readd >> module. >> >> in both situations dmesg shows: >> >> pnp: Failed to activate device 00:0b. >> >> >> Stopping tasks: ===========================================| >> Shrinking memory... done (39214 pages freed) >> pnp: Device 00:0c disabled. >> pnp: Device 00:08 disabled. >> swsusp: Need to copy 13752 pages >> ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low) >> -> IRQ 9 >> ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level, low) >> -> IRQ 9 >> ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level, low) >> -> IRQ 9 >> ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) >> -> IRQ 5 >> ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKD] -> GSI 9 (level, low) >> -> IRQ 9 >> ACPI: PCI Interrupt 0000:00:0a.2[C] -> Link [LNKA] -> GSI 11 (level, >> low) -> IRQ 11 >> usb usb1: root hub lost power or was reset >> ehci_hcd 0000:00:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 >> ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, >> low) -> IRQ 10 >> pnp: Device 00:08 activated. >> pnp: Failed to activate device 00:0b. >> pnp: Device 00:0c activated. >> Restarting tasks... done >> agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0. >> agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode >> agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode >> >> lspci >> 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host >> bridge (rev 03) >> 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP >> bridge (rev 03) >> 00:04.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) >> 00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) >> 00:04.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) >> 00:04.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) >> 00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] >> (rev 74) >> 00:0a.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >> Controller (rev 50) >> 00:0a.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >> Controller (rev 50) >> 00:0a.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) >> 00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) >> 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF/SG AGP >> >> >> dmesg says 00:08 and 00:0c are activated..but i've no idea which devices >> they are, lspci -vv shows nothing about that. >> >> Ready to give more infos and test patches. >> >> Patrizio Bassi >> >> > you're right, sorry, but, having the strange devices in dmesg let me think that's a problem in suspend too. ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-04-08 16:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <4437BB29.8050502@gmail.com>
2006-04-08 16:27 ` [BUG] 2.6.16.2 (like olders) fails to suspend audio device Lee Revell
2006-04-08 16:53 ` Patrizio Bassi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox