From: "Krzysztof Helt" <krzysztof.h1@wp.pl>
To: alsa-devel <alsa-devel@lists.sourceforge.net>
Subject: [PATCH] sparc dbri: hardware constrains added
Date: Tue, 22 Aug 2006 19:52:17 +0200 [thread overview]
Message-ID: <44eb445108302@wp.pl> (raw)
[-- Attachment #1: Type: text/plain, Size: 523 bytes --]
From: Krzysztof Helt (krzysztof.h1@wp.pl)
This patch adds ALSA hardware constrains so stereo is possible
only with 16-bit format. It contains small cleanups to ring
buffered code as well.
Signed-off-by: Krzysztof Helt (krzysztof.h1@wp.pl)
----------------------------------------------------
Najlepsze siatkarki plażowe świata w Warszawie!
Międzynarodowy turniej GE Money Bank Warsaw Open 2006
Agrykola 30.08-03.09.2006 -> Wstęp wolny -> Szczegóły:
http://klik.wp.pl/?adr=www.warsaw-beachvolley.pl&sid=850
[-- Attachment #2: dbri-patch10.diff --]
[-- Type: application/octet-stream, Size: 5688 bytes --]
--- alsa-driver-1.0.12rc2/alsa-kernel/sparc/dbri.c 2006-08-21 20:02:32.000000000 +0200
+++ linux-2.6.17a/sound/sparc/dbri.c 2006-08-21 21:33:04.000000000 +0200
@@ -85,7 +85,7 @@ MODULE_PARM_DESC(id, "ID string for Sun
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Sun DBRI soundcard.");
-#define DBRI_DEBUG
+#undef DBRI_DEBUG
#define D_INT (1<<0)
#define D_GEN (1<<1)
@@ -160,7 +160,7 @@ static struct {
/* { NA, (1 << 4), (5 << 3) }, */
{ 48000, (1 << 4), (6 << 3) },
{ 9600, (1 << 4), (7 << 3) },
- { 5513, (2 << 4), (0 << 3) }, /* Actually 5512.5 */
+ { 5512, (2 << 4), (0 << 3) }, /* Actually 5512.5 */
{ 11025, (2 << 4), (1 << 3) },
{ 18900, (2 << 4), (2 << 3) },
{ 22050, (2 << 4), (3 << 3) },
@@ -628,8 +628,6 @@ to send them to the DBRI.
*/
-static void dbri_process_interrupt_buffer(struct snd_dbri * dbri);
-
#define MAXLOOPS 10
/*
* Wait for the current command string to execute
@@ -669,15 +667,15 @@ static s32 *dbri_cmdlock(struct snd_dbri
}
/*
- * Send prepared cmd string. It works by writting a JMP cmd into
+ * Send prepared cmd string. It works by writting a JUMP cmd into
* the last WAIT cmd and force DBRI to reread the cmd.
- * The JMP cmd points to the new cmd string.
+ * The JUMP cmd points to the new cmd string.
* It also releases the cmdlock spinlock.
*/
static void dbri_cmdsend(struct snd_dbri * dbri, s32 * cmd,int len)
{
- s32 *ptr;
s32 tmp, addr;
+ unsigned long flags;
static int wait_id = 0;
wait_id++;
@@ -692,13 +690,16 @@ static void dbri_cmdsend(struct snd_dbri
#ifdef DBRI_DEBUG
if (cmd > dbri->cmdptr )
+ s32 *ptr;
+
for (ptr = dbri->cmdptr; ptr < cmd+2; ptr++) {
dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
}
else {
- ptr = dbri->cmdptr;
+ s32 *ptr = dbri->cmdptr;
+
dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
- ptr = dbri->cmdptr+1;
+ ptr++;
dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
for (ptr = dbri->dma->cmd; ptr < cmd+2; ptr++) {
dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
@@ -706,10 +707,12 @@ static void dbri_cmdsend(struct snd_dbri
}
#endif
+ spin_lock_irqsave(&dbri->lock, flags);
/* Reread the last command */
tmp = sbus_readl(dbri->regs + REG0);
tmp |= D_P;
sbus_writel(tmp, dbri->regs + REG0);
+ spin_unlock_irqrestore(&dbri->lock, flags);
dbri->cmdptr = cmd;
spin_unlock(&dbri->cmdlock);
@@ -1549,8 +1552,7 @@ static int cs4215_prepare(struct snd_dbr
CS4215_BSEL_128 | CS4215_FREQ[freq_idx].xtal;
dbri->mm.channels = channels;
- /* Stereo bit: 8 bit stereo not working yet. */
- if ((channels > 1) && (dbri->mm.precision == 16))
+ if (channels == 2)
dbri->mm.ctrl[1] |= CS4215_DFR_STEREO;
ret = cs4215_setctrl(dbri);
@@ -1624,7 +1626,7 @@ interrupts are disabled.
/* xmit_descs()
*
- * Transmit the current TD's for recording/playing, if needed.
+ * Starts transmiting the current TD's for recording/playing.
* For playback, ALSA has filled the DMA memory with new data (we hope).
*/
static void xmit_descs(struct snd_dbri *dbri)
@@ -1699,9 +1701,9 @@ play:
* them as available. Stops when the first descriptor is found without
* TBC (Transmit Buffer Complete) set, or we've run through them all.
*
- * The DMA buffers are not released, but re-used. Since the transmit buffer
- * descriptors are not clobbered, they can be re-submitted as is. This is
- * done by the xmit_descs() tasklet above since that could take longer.
+ * The DMA buffers are not released. They form a ring buffer and
+ * they are filled by ALSA while others are transmitted by DMA.
+ *
*/
static void transmission_complete_intr(struct snd_dbri * dbri, int pipe)
@@ -1944,8 +1946,8 @@ static struct snd_pcm_hardware snd_dbri_
SNDRV_PCM_FMTBIT_A_LAW |
SNDRV_PCM_FMTBIT_U8 |
SNDRV_PCM_FMTBIT_S16_BE,
- .rates = SNDRV_PCM_RATE_8000_48000,
- .rate_min = 8000,
+ .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_5512,
+ .rate_min = 5512,
.rate_max = 48000,
.channels_min = 1,
.channels_max = 2,
@@ -1956,6 +1958,39 @@ static struct snd_pcm_hardware snd_dbri_
.periods_max = 1024,
};
+static int snd_hw_rule_format(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_interval *c = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+ struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+ struct snd_mask fmt;
+
+ snd_mask_any(&fmt);
+ if (c->min > 1) {
+ fmt.bits[0] &= SNDRV_PCM_FMTBIT_S16_BE;
+ return snd_mask_refine(f, &fmt);
+ }
+ return 0;
+}
+
+static int snd_hw_rule_channels(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_interval *c = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+ struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+ struct snd_interval ch;
+
+ snd_interval_any(&ch);
+ if (!(f->bits[0] & SNDRV_PCM_FMTBIT_S16_BE)) {
+ ch.min = ch.max = 1;
+ ch.integer = 1;
+ return snd_interval_refine(c, &ch);
+ }
+ return 0;
+}
+
static int snd_dbri_open(struct snd_pcm_substream *substream)
{
struct snd_dbri *dbri = snd_pcm_substream_chip(substream);
@@ -1973,6 +2008,14 @@ static int snd_dbri_open(struct snd_pcm_
info->pipe = -1;
spin_unlock_irqrestore(&dbri->lock, flags);
+ snd_pcm_hw_rule_add(runtime,0,SNDRV_PCM_HW_PARAM_CHANNELS,
+ snd_hw_rule_format, 0, SNDRV_PCM_HW_PARAM_FORMAT,
+ -1);
+ snd_pcm_hw_rule_add(runtime,0,SNDRV_PCM_HW_PARAM_FORMAT,
+ snd_hw_rule_channels, 0,
+ SNDRV_PCM_HW_PARAM_CHANNELS,
+ -1);
+
cs4215_open(dbri);
return 0;
[-- Attachment #3: Type: text/plain, Size: 373 bytes --]
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
[-- Attachment #4: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
next reply other threads:[~2006-08-22 17:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-22 17:52 Krzysztof Helt [this message]
2006-08-23 9:39 ` [PATCH] sparc dbri: hardware constrains added Takashi Iwai
2006-08-23 10:53 ` Krzysztof Helt
2006-08-23 18:18 ` Takashi Iwai
2006-08-24 6:14 ` Krzysztof Helt
2006-08-24 19:05 ` Krzysztof Helt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44eb445108302@wp.pl \
--to=krzysztof.h1@wp.pl \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox