* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
[not found] ` <20060925202644.GB6278@ucw.cz>
@ 2006-09-26 1:12 ` Michael Clark
2006-09-26 1:15 ` Jeremy Fitzhardinge
1 sibling, 0 replies; 17+ messages in thread
From: Michael Clark @ 2006-09-26 1:12 UTC (permalink / raw)
To: Pavel Machek, Jeremy Fitzhardinge
Cc: Takashi Iwai, Andrew Morton, alsa-devel,
Linux Kernel Mailing List
Pavel Machek wrote:
> Hi!
>
>
>> I have a ThinkPad X60 which uses the Intel 82801G HDA
>> audio chip. This used to work for me, but lately
>> (sometime during 2.6.18-rcX series) it stopped working -
>> programs trying to use it tend to just block forever
>> waiting for /dev/dsp.
>>
>
> I have x60 here,
>
>
>> The only obvious symptom is:
>>
>> hda_intel: azx_get_response timeout, switching to
>> single_cmd mode...
>>
>>
I got similar kernel message relating to an azx_get_response timeout
with an 82801G HDA audio running Debian kernel 2.6.16-2 (happened during
suspend to ram IIRC) - after replacing kernel alsa with alsa-source
1.0.12 (24 Aug release) the problem went away (in addition to making
sound come out when it didn't before).
Not sure if this info helps but trying the alsa-project release and
seeing if that works may help identify what needs fixing in mainline
hda_intel.
~mc
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
[not found] ` <20060925202644.GB6278@ucw.cz>
2006-09-26 1:12 ` 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode Michael Clark
@ 2006-09-26 1:15 ` Jeremy Fitzhardinge
1 sibling, 0 replies; 17+ messages in thread
From: Jeremy Fitzhardinge @ 2006-09-26 1:15 UTC (permalink / raw)
To: Pavel Machek
Cc: Takashi Iwai, Andrew Morton, alsa-devel,
Linux Kernel Mailing List
Pavel Machek wrote:
> sometimes see this message, too, and sound more or less works for me.
> (Using alsa interface, mplayer works ok. mpg123 does not work).
>
That's how it used to be for me, but not any more.
J
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
[not found] <451834D0.40304@goop.org>
[not found] ` <20060925202644.GB6278@ucw.cz>
@ 2006-09-26 10:16 ` Takashi Iwai
2006-09-26 15:37 ` Randy Dunlap
` (3 more replies)
[not found] ` <20061004135743.GA6150@irc.pl>
2 siblings, 4 replies; 17+ messages in thread
From: Takashi Iwai @ 2006-09-26 10:16 UTC (permalink / raw)
To: Jeremy Fitzhardinge
Cc: Andrew Morton, Pavel Machek, Linux Kernel Mailing List,
alsa-devel
At Mon, 25 Sep 2006 12:58:08 -0700,
Jeremy Fitzhardinge wrote:
>
> I have a ThinkPad X60 which uses the Intel 82801G HDA audio chip. This
> used to work for me, but lately (sometime during 2.6.18-rcX series) it
> stopped working - programs trying to use it tend to just block forever
> waiting for /dev/dsp.
>
> The only obvious symptom is:
>
> hda_intel: azx_get_response timeout, switching to single_cmd mode...
>
> appearing in the kernel log when booting.
>
There is no big change relevant to TP X60 during 2.6.18rc, so I don't
think it's a regression in the hd-audio driver code.
> Details attached. The dmesg output is for the FC6 distro kernel
> 2.6.18-1.2689.fc6PAE, but I see the same symptoms with 2.6.18-mm1.
You must see difference with mm1 (suppose that mm1 already includes
the latest ALSA patches). When the CORB/RIRB interrupt gets broken,
the driver first switches to poling mode, then single_cmd mode as
fallback.
Also, try disable_msi=1 option for mm1. MSI seems broken on some
systems.
Takashi
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
2006-09-26 10:16 ` Takashi Iwai
@ 2006-09-26 15:37 ` Randy Dunlap
2006-09-26 15:48 ` Takashi Iwai
2006-09-26 16:31 ` Andrew Morton
` (2 subsequent siblings)
3 siblings, 1 reply; 17+ messages in thread
From: Randy Dunlap @ 2006-09-26 15:37 UTC (permalink / raw)
To: Takashi Iwai
Cc: Andrew Morton, Jeremy Fitzhardinge, Pavel Machek, alsa-devel,
Linux Kernel Mailing List
On Tue, 26 Sep 2006 12:16:33 +0200 Takashi Iwai wrote:
> At Mon, 25 Sep 2006 12:58:08 -0700,
> Jeremy Fitzhardinge wrote:
> >
> > I have a ThinkPad X60 which uses the Intel 82801G HDA audio chip. This
> > used to work for me, but lately (sometime during 2.6.18-rcX series) it
> > stopped working - programs trying to use it tend to just block forever
> > waiting for /dev/dsp.
> >
> > The only obvious symptom is:
> >
> > hda_intel: azx_get_response timeout, switching to single_cmd mode...
> >
> > appearing in the kernel log when booting.
> >
>
> There is no big change relevant to TP X60 during 2.6.18rc, so I don't
> think it's a regression in the hd-audio driver code.
>
> > Details attached. The dmesg output is for the FC6 distro kernel
> > 2.6.18-1.2689.fc6PAE, but I see the same symptoms with 2.6.18-mm1.
>
> You must see difference with mm1 (suppose that mm1 already includes
> the latest ALSA patches). When the CORB/RIRB interrupt gets broken,
> the driver first switches to poling mode, then single_cmd mode as
> fallback.
>
> Also, try disable_msi=1 option for mm1. MSI seems broken on some
> systems.
is that "pci=nomsi" ?
---
~Randy
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
2006-09-26 15:37 ` Randy Dunlap
@ 2006-09-26 15:48 ` Takashi Iwai
2006-09-26 15:56 ` Randy Dunlap
0 siblings, 1 reply; 17+ messages in thread
From: Takashi Iwai @ 2006-09-26 15:48 UTC (permalink / raw)
To: Randy Dunlap
Cc: Andrew Morton, Jeremy Fitzhardinge, Pavel Machek, alsa-devel,
Linux Kernel Mailing List
At Tue, 26 Sep 2006 08:37:20 -0700,
Randy Dunlap wrote:
>
> On Tue, 26 Sep 2006 12:16:33 +0200 Takashi Iwai wrote:
>
> > At Mon, 25 Sep 2006 12:58:08 -0700,
> > Jeremy Fitzhardinge wrote:
> > >
> > > I have a ThinkPad X60 which uses the Intel 82801G HDA audio chip. This
> > > used to work for me, but lately (sometime during 2.6.18-rcX series) it
> > > stopped working - programs trying to use it tend to just block forever
> > > waiting for /dev/dsp.
> > >
> > > The only obvious symptom is:
> > >
> > > hda_intel: azx_get_response timeout, switching to single_cmd mode...
> > >
> > > appearing in the kernel log when booting.
> > >
> >
> > There is no big change relevant to TP X60 during 2.6.18rc, so I don't
> > think it's a regression in the hd-audio driver code.
> >
> > > Details attached. The dmesg output is for the FC6 distro kernel
> > > 2.6.18-1.2689.fc6PAE, but I see the same symptoms with 2.6.18-mm1.
> >
> > You must see difference with mm1 (suppose that mm1 already includes
> > the latest ALSA patches). When the CORB/RIRB interrupt gets broken,
> > the driver first switches to poling mode, then single_cmd mode as
> > fallback.
> >
> > Also, try disable_msi=1 option for mm1. MSI seems broken on some
> > systems.
>
> is that "pci=nomsi" ?
No, snd-hda-intel driver has a new module option "disable_msi" to
disable MSI support on that driver. As default, it's off, i.e. MSI is
enabled if available. (Well, I feel it's better to rename it
enable_msi and set on as default...)
Sorry for unclear text.
Takashi
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
2006-09-26 15:48 ` Takashi Iwai
@ 2006-09-26 15:56 ` Randy Dunlap
2006-09-26 16:09 ` Takashi Iwai
0 siblings, 1 reply; 17+ messages in thread
From: Randy Dunlap @ 2006-09-26 15:56 UTC (permalink / raw)
To: Takashi Iwai
Cc: Andrew Morton, Jeremy Fitzhardinge, Pavel Machek, alsa-devel,
Linux Kernel Mailing List
On Tue, 26 Sep 2006 17:48:33 +0200 Takashi Iwai wrote:
> At Tue, 26 Sep 2006 08:37:20 -0700,
> Randy Dunlap wrote:
> >
> > On Tue, 26 Sep 2006 12:16:33 +0200 Takashi Iwai wrote:
> >
> > > At Mon, 25 Sep 2006 12:58:08 -0700,
> > > Jeremy Fitzhardinge wrote:
> > > >
> > > > I have a ThinkPad X60 which uses the Intel 82801G HDA audio chip. This
> > > > used to work for me, but lately (sometime during 2.6.18-rcX series) it
> > > > stopped working - programs trying to use it tend to just block forever
> > > > waiting for /dev/dsp.
> > > >
> > > > The only obvious symptom is:
> > > >
> > > > hda_intel: azx_get_response timeout, switching to single_cmd mode...
> > > >
> > > > appearing in the kernel log when booting.
> > > >
> > >
> > > There is no big change relevant to TP X60 during 2.6.18rc, so I don't
> > > think it's a regression in the hd-audio driver code.
> > >
> > > > Details attached. The dmesg output is for the FC6 distro kernel
> > > > 2.6.18-1.2689.fc6PAE, but I see the same symptoms with 2.6.18-mm1.
> > >
> > > You must see difference with mm1 (suppose that mm1 already includes
> > > the latest ALSA patches). When the CORB/RIRB interrupt gets broken,
> > > the driver first switches to poling mode, then single_cmd mode as
> > > fallback.
> > >
> > > Also, try disable_msi=1 option for mm1. MSI seems broken on some
> > > systems.
> >
> > is that "pci=nomsi" ?
>
> No, snd-hda-intel driver has a new module option "disable_msi" to
> disable MSI support on that driver. As default, it's off, i.e. MSI is
> enabled if available. (Well, I feel it's better to rename it
> enable_msi and set on as default...)
>
> Sorry for unclear text.
ugh. We shouldn't have drivers with such options IMO.
I have seen/used MSI for ethernet, SATA, and audio.
It either works for all of them or none of them AFAIK.
Why do you think that it should not just be a global system option/flag?
---
~Randy
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
2006-09-26 15:56 ` Randy Dunlap
@ 2006-09-26 16:09 ` Takashi Iwai
0 siblings, 0 replies; 17+ messages in thread
From: Takashi Iwai @ 2006-09-26 16:09 UTC (permalink / raw)
To: Randy Dunlap
Cc: Andrew Morton, Jeremy Fitzhardinge, Pavel Machek, alsa-devel,
Linux Kernel Mailing List
At Tue, 26 Sep 2006 08:56:11 -0700,
Randy Dunlap wrote:
>
> On Tue, 26 Sep 2006 17:48:33 +0200 Takashi Iwai wrote:
>
> > At Tue, 26 Sep 2006 08:37:20 -0700,
> > Randy Dunlap wrote:
> > >
> > > On Tue, 26 Sep 2006 12:16:33 +0200 Takashi Iwai wrote:
> > >
> > > > At Mon, 25 Sep 2006 12:58:08 -0700,
> > > > Jeremy Fitzhardinge wrote:
> > > > >
> > > > > I have a ThinkPad X60 which uses the Intel 82801G HDA audio chip. This
> > > > > used to work for me, but lately (sometime during 2.6.18-rcX series) it
> > > > > stopped working - programs trying to use it tend to just block forever
> > > > > waiting for /dev/dsp.
> > > > >
> > > > > The only obvious symptom is:
> > > > >
> > > > > hda_intel: azx_get_response timeout, switching to single_cmd mode...
> > > > >
> > > > > appearing in the kernel log when booting.
> > > > >
> > > >
> > > > There is no big change relevant to TP X60 during 2.6.18rc, so I don't
> > > > think it's a regression in the hd-audio driver code.
> > > >
> > > > > Details attached. The dmesg output is for the FC6 distro kernel
> > > > > 2.6.18-1.2689.fc6PAE, but I see the same symptoms with 2.6.18-mm1.
> > > >
> > > > You must see difference with mm1 (suppose that mm1 already includes
> > > > the latest ALSA patches). When the CORB/RIRB interrupt gets broken,
> > > > the driver first switches to poling mode, then single_cmd mode as
> > > > fallback.
> > > >
> > > > Also, try disable_msi=1 option for mm1. MSI seems broken on some
> > > > systems.
> > >
> > > is that "pci=nomsi" ?
> >
> > No, snd-hda-intel driver has a new module option "disable_msi" to
> > disable MSI support on that driver. As default, it's off, i.e. MSI is
> > enabled if available. (Well, I feel it's better to rename it
> > enable_msi and set on as default...)
> >
> > Sorry for unclear text.
>
> ugh. We shouldn't have drivers with such options IMO.
> I have seen/used MSI for ethernet, SATA, and audio.
Heh, you're a lucky guy :)
> It either works for all of them or none of them AFAIK.
>
> Why do you think that it should not just be a global system option/flag?
In the ealier version, we didn't call pci_enable_msi() in the driver
while the newer version does unless you pass disable_msi=1 option.
Thus, this option means to behave like the old driver. This makes
much easier to find out a regression than a global boot option
affecting all subsytems.
Takashi
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
2006-09-26 10:16 ` Takashi Iwai
2006-09-26 15:37 ` Randy Dunlap
@ 2006-09-26 16:31 ` Andrew Morton
[not found] ` <20060926093142.43369b93.akpm@osdl.org>
2006-10-01 6:03 ` Jeremy Fitzhardinge
3 siblings, 0 replies; 17+ messages in thread
From: Andrew Morton @ 2006-09-26 16:31 UTC (permalink / raw)
To: Takashi Iwai
Cc: Jeremy Fitzhardinge, Pavel Machek, alsa-devel,
Linux Kernel Mailing List
On Tue, 26 Sep 2006 12:16:33 +0200
Takashi Iwai <tiwai@suse.de> wrote:
> You must see difference with mm1 (suppose that mm1 already includes
> the latest ALSA patches).
No, the alsa tree was accidentally omitted from 2.6.18-mm1, sorry.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
[not found] ` <20060926093142.43369b93.akpm@osdl.org>
@ 2006-09-26 16:42 ` Takashi Iwai
0 siblings, 0 replies; 17+ messages in thread
From: Takashi Iwai @ 2006-09-26 16:42 UTC (permalink / raw)
To: Andrew Morton
Cc: Jeremy Fitzhardinge, Pavel Machek, alsa-devel,
Linux Kernel Mailing List
At Tue, 26 Sep 2006 09:31:42 -0700,
Andrew Morton wrote:
>
> On Tue, 26 Sep 2006 12:16:33 +0200
> Takashi Iwai <tiwai@suse.de> wrote:
>
> > You must see difference with mm1 (suppose that mm1 already includes
> > the latest ALSA patches).
>
> No, the alsa tree was accidentally omitted from 2.6.18-mm1, sorry.
Ah, that makes sense. Thanks for notice.
Takashi
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
2006-09-26 10:16 ` Takashi Iwai
` (2 preceding siblings ...)
[not found] ` <20060926093142.43369b93.akpm@osdl.org>
@ 2006-10-01 6:03 ` Jeremy Fitzhardinge
2006-10-04 9:21 ` Takashi Iwai
3 siblings, 1 reply; 17+ messages in thread
From: Jeremy Fitzhardinge @ 2006-10-01 6:03 UTC (permalink / raw)
To: Takashi Iwai
Cc: Andrew Morton, Pavel Machek, Linux Kernel Mailing List,
alsa-devel
Takashi Iwai wrote:
> You must see difference with mm1 (suppose that mm1 already includes
> the latest ALSA patches). When the CORB/RIRB interrupt gets broken,
> the driver first switches to poling mode, then single_cmd mode as
> fallback.
>
I tried -mm2, and I'm seeing the same problem.
> Also, try disable_msi=1 option for mm1. MSI seems broken on some
> systems.
>
This made no difference.
J
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
2006-10-01 6:03 ` Jeremy Fitzhardinge
@ 2006-10-04 9:21 ` Takashi Iwai
2006-10-04 15:16 ` Jeremy Fitzhardinge
0 siblings, 1 reply; 17+ messages in thread
From: Takashi Iwai @ 2006-10-04 9:21 UTC (permalink / raw)
To: Jeremy Fitzhardinge
Cc: Andrew Morton, Pavel Machek, Linux Kernel Mailing List,
alsa-devel
At Sat, 30 Sep 2006 23:03:08 -0700,
Jeremy Fitzhardinge wrote:
>
> Takashi Iwai wrote:
> > You must see difference with mm1 (suppose that mm1 already includes
> > the latest ALSA patches). When the CORB/RIRB interrupt gets broken,
> > the driver first switches to poling mode, then single_cmd mode as
> > fallback.
> >
>
> I tried -mm2, and I'm seeing the same problem.
At least, you have to see a different kernel message after the
patch... Could you confirm it?
Takashi
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
2006-10-04 9:21 ` Takashi Iwai
@ 2006-10-04 15:16 ` Jeremy Fitzhardinge
2006-10-04 15:38 ` Takashi Iwai
2006-10-04 19:04 ` Takashi Iwai
0 siblings, 2 replies; 17+ messages in thread
From: Jeremy Fitzhardinge @ 2006-10-04 15:16 UTC (permalink / raw)
To: Takashi Iwai
Cc: Andrew Morton, Pavel Machek, Linux Kernel Mailing List,
alsa-devel
Takashi Iwai wrote:
> At least, you have to see a different kernel message after the
> patch... Could you confirm it?
>
No, it looks like the same message as ever:
hda_intel: azx_get_response timeout, switching to polling mode...
hda_intel: azx_get_response timeout, switching to single_cmd mode...
This is with -mm3.
J
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
[not found] ` <20061004135743.GA6150@irc.pl>
@ 2006-10-04 15:16 ` Jeremy Fitzhardinge
0 siblings, 0 replies; 17+ messages in thread
From: Jeremy Fitzhardinge @ 2006-10-04 15:16 UTC (permalink / raw)
To: Jeremy Fitzhardinge, Takashi Iwai, Pavel Machek,
Linux Kernel Mailing List, alsa-devel, Andrew Morton
Tomasz Torcz wrote:
> Just a blind shot -- do you have modem enabled in BIOS? Sometimes
> disabling (hiding) modem breaks sound.
>
Good suggestion. It might be disabled; I'll switch it around next time
I reboot.
J
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
2006-10-04 15:16 ` Jeremy Fitzhardinge
@ 2006-10-04 15:38 ` Takashi Iwai
2006-10-04 19:04 ` Takashi Iwai
1 sibling, 0 replies; 17+ messages in thread
From: Takashi Iwai @ 2006-10-04 15:38 UTC (permalink / raw)
To: Jeremy Fitzhardinge
Cc: Andrew Morton, Pavel Machek, Linux Kernel Mailing List,
alsa-devel
At Wed, 04 Oct 2006 08:16:17 -0700,
Jeremy Fitzhardinge wrote:
>
> Takashi Iwai wrote:
> > At least, you have to see a different kernel message after the
> > patch... Could you confirm it?
> >
>
> No, it looks like the same message as ever:
>
> hda_intel: azx_get_response timeout, switching to polling mode...
This is a new message. There was no poling mode on 2.6.18.
> hda_intel: azx_get_response timeout, switching to single_cmd mode...
So, this looks like that the CORB/RIRB register mapping is actually
broken...
Takashi
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
2006-10-04 15:16 ` Jeremy Fitzhardinge
2006-10-04 15:38 ` Takashi Iwai
@ 2006-10-04 19:04 ` Takashi Iwai
2006-10-04 20:07 ` Jeremy Fitzhardinge
1 sibling, 1 reply; 17+ messages in thread
From: Takashi Iwai @ 2006-10-04 19:04 UTC (permalink / raw)
To: Jeremy Fitzhardinge
Cc: Andrew Morton, Pavel Machek, Linux Kernel Mailing List,
alsa-devel
At Wed, 04 Oct 2006 08:16:17 -0700,
Jeremy Fitzhardinge wrote:
>
> Takashi Iwai wrote:
> > At least, you have to see a different kernel message after the
> > patch... Could you confirm it?
> >
>
> No, it looks like the same message as ever:
>
> hda_intel: azx_get_response timeout, switching to polling mode...
> hda_intel: azx_get_response timeout, switching to single_cmd mode...
A counter of RIRB pending commands could overflow the size of RIRB
when a bunch of commands are sent but not synced. This may lead to
the azx_get_response error, theoretically.
Could you apply the patch below and check what values are shown there?
thanks,
Takashi
diff -r 4963791e6192 sound/pci/hda/hda_intel.c
--- a/sound/pci/hda/hda_intel.c Wed Oct 04 18:38:16 2006 +0200
+++ b/sound/pci/hda/hda_intel.c Wed Oct 04 20:59:57 2006 +0200
@@ -325,6 +325,7 @@ struct azx {
/* CORB/RIRB */
struct azx_rb corb;
struct azx_rb rirb;
+ int max_rirb_cmds;
/* BDL, CORB/RIRB and position buffers */
struct snd_dma_buffer bdl;
@@ -480,6 +481,8 @@ static int azx_corb_send_cmd(struct hda_
spin_lock_irq(&chip->reg_lock);
chip->rirb.cmds++;
+ if (chip->rirb.cmds > chip->max_rirb_cmds)
+ chip->max_rirb_cmds = chip->rirb.cmds;
chip->corb.buf[wp] = cpu_to_le32(val);
azx_writel(chip, CORBWP, wp);
spin_unlock_irq(&chip->reg_lock);
@@ -538,12 +541,16 @@ static unsigned int azx_rirb_get_respons
if (!chip->polling_mode) {
snd_printk(KERN_WARNING "hda_intel: azx_get_response timeout, "
"switching to polling mode...\n");
+ snd_printk(KERN_WARNING " RIRB pending = %d, peak = %d\n",
+ chip->rirb.cmds, chip->max_rirb_cmds);
chip->polling_mode = 1;
goto again;
}
snd_printk(KERN_ERR "hda_intel: azx_get_response timeout, "
"switching to single_cmd mode...\n");
+ snd_printk(KERN_ERR " RIRB pending = %d, peak = %d\n",
+ chip->rirb.cmds, chip->max_rirb_cmds);
chip->rirb.rp = azx_readb(chip, RIRBWP);
chip->rirb.cmds = 0;
/* switch to single_cmd mode */
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
2006-10-04 19:04 ` Takashi Iwai
@ 2006-10-04 20:07 ` Jeremy Fitzhardinge
2006-10-05 9:58 ` Takashi Iwai
0 siblings, 1 reply; 17+ messages in thread
From: Jeremy Fitzhardinge @ 2006-10-04 20:07 UTC (permalink / raw)
To: Takashi Iwai
Cc: Andrew Morton, Pavel Machek, Linux Kernel Mailing List,
alsa-devel
Takashi Iwai wrote:
> A counter of RIRB pending commands could overflow the size of RIRB
> when a bunch of commands are sent but not synced. This may lead to
> the azx_get_response error, theoretically.
>
> Could you apply the patch below and check what values are shown there?
>
I'll try it, but I re-enabled the modem in the bios, and I no longer get
this message and it appears to work (there seems to be a secondary
problem that the volume hotkeys have stopped working, but I suspect
that's more ACPI-related).
J
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode...
2006-10-04 20:07 ` Jeremy Fitzhardinge
@ 2006-10-05 9:58 ` Takashi Iwai
0 siblings, 0 replies; 17+ messages in thread
From: Takashi Iwai @ 2006-10-05 9:58 UTC (permalink / raw)
To: Jeremy Fitzhardinge
Cc: Andrew Morton, Pavel Machek, Linux Kernel Mailing List,
alsa-devel
At Wed, 04 Oct 2006 13:07:56 -0700,
Jeremy Fitzhardinge wrote:
>
> Takashi Iwai wrote:
> > A counter of RIRB pending commands could overflow the size of RIRB
> > when a bunch of commands are sent but not synced. This may lead to
> > the azx_get_response error, theoretically.
> >
> > Could you apply the patch below and check what values are shown there?
> >
> I'll try it, but I re-enabled the modem in the bios, and I no longer get
> this message and it appears to work (there seems to be a secondary
> problem that the volume hotkeys have stopped working, but I suspect
> that's more ACPI-related).
Ah, that's good to hear.
Is the modem also HD-audio modem? If so, you have two codec#* files
in /proc/asound/card0.
Takashi
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2006-10-05 9:59 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <451834D0.40304@goop.org>
[not found] ` <20060925202644.GB6278@ucw.cz>
2006-09-26 1:12 ` 2.6.18: hda_intel: azx_get_response timeout, switching to single_cmd mode Michael Clark
2006-09-26 1:15 ` Jeremy Fitzhardinge
2006-09-26 10:16 ` Takashi Iwai
2006-09-26 15:37 ` Randy Dunlap
2006-09-26 15:48 ` Takashi Iwai
2006-09-26 15:56 ` Randy Dunlap
2006-09-26 16:09 ` Takashi Iwai
2006-09-26 16:31 ` Andrew Morton
[not found] ` <20060926093142.43369b93.akpm@osdl.org>
2006-09-26 16:42 ` Takashi Iwai
2006-10-01 6:03 ` Jeremy Fitzhardinge
2006-10-04 9:21 ` Takashi Iwai
2006-10-04 15:16 ` Jeremy Fitzhardinge
2006-10-04 15:38 ` Takashi Iwai
2006-10-04 19:04 ` Takashi Iwai
2006-10-04 20:07 ` Jeremy Fitzhardinge
2006-10-05 9:58 ` Takashi Iwai
[not found] ` <20061004135743.GA6150@irc.pl>
2006-10-04 15:16 ` Jeremy Fitzhardinge
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox