From: "Daniele (Mastro)" <daniele.bilug@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: Notebook Toshiba satellite x200-21g with realtek snd-hda-intel audio device still not supported (codec ALC268)
Date: Tue, 19 Feb 2008 18:29:40 +0100 [thread overview]
Message-ID: <47BB1204.5010801@gmail.com> (raw)
In-Reply-To: <s5hir0kudkz.wl%tiwai@suse.de>
Takashi Iwai ha scritto:
>> - Digital = 68
>
> Keep this 50%. It's a digital attenuation/gain control and changing
> this makes no sense unless you have a digital mic without the hardware
> volume control.
if i put 50% there the mic it's a bit "low" with volume and i have to
spoke really near to it
(however sound is cleaner, lower but cleaner)
>> - Input Source = Front mic
>> - Input Source 1 = Front mic (playback - see below)
>
> Is "Front mic" the external mic jack? And the internal mic works as
> well?
"front mic" works as the jack in the front of my laptop
no internal mic doesn't work at all.. and i don't know if there's one to
be honest cause i never booted windows here
> The second capture could work independently, assigned to PCM#2.
sorry i think i didn't understand what do you mean..
so the behavior is "normal"? or it isn't? or it is "fixable" in some way?
with my previous laptop i used to have only 1 capture device and to
select if i want to use it only as playback, only as capture or both..
here i've to do this separately with 2 device.. it's not a big deal..
it's only strange
> No, you are fooled by marketing people. It has no MIDI hardware.
> It's a pure software thingy.
>
actually it say under "audio specification" for my notebook
Standard sonori supportati : MIDI support
which means:
Supported sound standard: MIDI support
you can read it here:
http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=IT&toshibaShop=false&com.broadvision.session.new=Yes&PRODUCT_ID=137947
(i don't know if this page will still visible in future)
>> - no "mux","mix", or "aux" record source to directly record from desktop
>
> The codec has no function to record from the mixer amp (some other
> Realtek codecs have, though). It's again a software issue.
ok.. so i've no way to "record what I'm listening" right? (no way other
that using a microphone off course)
> No, you don't. aplay just shows the available "configuration" but it
> the device doesn't support surrounds.
oh ok :)
do you know how can i test subwoofer?
it seems active but if there's a way to actually "test" it would be nice
sorry for me bothering you :)
i hope one day I'll be able to pay back your kindness
--
Daniele
next prev parent reply other threads:[~2008-02-19 17:29 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-18 2:09 Notebook Toshiba satellite x200-21g with realtek snd-hda-intel audio device still not supported (codec ALC268) Daniele (Mastro)
2007-12-19 12:47 ` Daniele (Mastro)
2007-12-20 8:46 ` Daniele (Mastro)
2007-12-20 14:03 ` Takashi Iwai
2007-12-21 0:04 ` Daniele (Mastro)
2007-12-21 1:10 ` Tobin Davis
2007-12-21 10:14 ` Daniele (Mastro)
2007-12-24 20:40 ` Daniele (Mastro)
2007-12-26 16:08 ` Daniele (Mastro)
2007-12-26 21:13 ` Tobin Davis
2007-12-28 4:15 ` Tobin Davis
2008-02-11 15:46 ` Daniele (Mastro)
2008-02-11 16:09 ` Takashi Iwai
2008-02-11 16:31 ` Takashi Iwai
2008-02-11 22:58 ` Daniele (Mastro)
2008-02-12 10:23 ` Takashi Iwai
2008-02-13 0:32 ` Daniele (Mastro)
2008-02-15 17:56 ` Daniele (Mastro)
2008-02-18 18:06 ` Daniele (Mastro)
2008-02-19 14:02 ` Takashi Iwai
2008-02-19 14:18 ` Daniele (Mastro)
2008-02-19 14:34 ` Takashi Iwai
2008-02-19 15:03 ` Daniele (Mastro)
2008-02-19 15:10 ` Takashi Iwai
2008-02-19 15:55 ` Daniele (Mastro)
2008-02-19 16:15 ` Takashi Iwai
2008-02-19 17:29 ` Daniele (Mastro) [this message]
2008-02-19 18:16 ` Tobin Davis
2008-02-19 18:52 ` Daniele (Mastro)
2008-02-19 19:01 ` Tobin Davis
-- strict thread matches above, loose matches on Subject: below --
2007-12-16 14:35 Daniele (Mastro)
2007-12-17 10:03 ` Takashi Iwai
2007-12-17 14:13 ` Daniele (Mastro)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47BB1204.5010801@gmail.com \
--to=daniele.bilug@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox