From: "Daniele (Mastro)" <daniele.bilug@gmail.com>
To: Tobin Davis <tdavis@dsl-only.net>
Cc: Takashi Iwai <tiwai@suse.de>, alsa-devel@alsa-project.org
Subject: Re: Notebook Toshiba satellite x200-21g with realtek snd-hda-intel audio device still not supported (codec ALC268)
Date: Tue, 19 Feb 2008 19:52:42 +0100 [thread overview]
Message-ID: <47BB257A.1080800@gmail.com> (raw)
In-Reply-To: <1203444980.1677.20.camel@razman.gruemaster.com>
Tobin Davis ha scritto:
> The only way to support Midi on that system is via software midi. There
> is no hardware midi support directly to the system (no place to plug in
> midi devices), except through USB or possibly integrated in a docking
> system. To get Midi support for Linux, use Timidity
> (http://timidity.sourceforge.net). This will convert midi sequences to
> pcm audio tracks.
ok.. they sucks :)
anyway i know how to do software midi.. i've written a guide for it too
some times ago, thanks
> I personally can't translate the specs listed, but from what I can tell,
> the system should have a Line-in, Mic-In, and HP-out jacks, along with 4
> internal speakers (nothing indicating surround sound). It does have
> SPDIF out, and I would assume that will allow surround sound if hooked
> up to a digital receiver, as SPDIF is essentially a digital
> pass-through. The codec itself only has two DACs, which could be
> configured between the headphones and speakers to do a quasi-surround4.0
> setup, but based on the chip diagram would take some additional
> programming effort.
i'm 130% sure there's a subwoofer anyway..
> And I'm sorry I dropped the ball in helping here. I wish I could spend
> more time on Alsa, but economics forces me to have a full time job doing
> non-alsa work at this time. Bad excuse, I know.
i understand it :) no problem! thanks a lot for what you have done!
> I'll try to get my test board working again this week, and I'll even
> download the Windows drivers for your system to use as a baseline for
> comparison. No guarantees, though.
ok.. if you found something keep me informed, thanks!
--
Daniele
next prev parent reply other threads:[~2008-02-19 18:53 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-18 2:09 Notebook Toshiba satellite x200-21g with realtek snd-hda-intel audio device still not supported (codec ALC268) Daniele (Mastro)
2007-12-19 12:47 ` Daniele (Mastro)
2007-12-20 8:46 ` Daniele (Mastro)
2007-12-20 14:03 ` Takashi Iwai
2007-12-21 0:04 ` Daniele (Mastro)
2007-12-21 1:10 ` Tobin Davis
2007-12-21 10:14 ` Daniele (Mastro)
2007-12-24 20:40 ` Daniele (Mastro)
2007-12-26 16:08 ` Daniele (Mastro)
2007-12-26 21:13 ` Tobin Davis
2007-12-28 4:15 ` Tobin Davis
2008-02-11 15:46 ` Daniele (Mastro)
2008-02-11 16:09 ` Takashi Iwai
2008-02-11 16:31 ` Takashi Iwai
2008-02-11 22:58 ` Daniele (Mastro)
2008-02-12 10:23 ` Takashi Iwai
2008-02-13 0:32 ` Daniele (Mastro)
2008-02-15 17:56 ` Daniele (Mastro)
2008-02-18 18:06 ` Daniele (Mastro)
2008-02-19 14:02 ` Takashi Iwai
2008-02-19 14:18 ` Daniele (Mastro)
2008-02-19 14:34 ` Takashi Iwai
2008-02-19 15:03 ` Daniele (Mastro)
2008-02-19 15:10 ` Takashi Iwai
2008-02-19 15:55 ` Daniele (Mastro)
2008-02-19 16:15 ` Takashi Iwai
2008-02-19 17:29 ` Daniele (Mastro)
2008-02-19 18:16 ` Tobin Davis
2008-02-19 18:52 ` Daniele (Mastro) [this message]
2008-02-19 19:01 ` Tobin Davis
-- strict thread matches above, loose matches on Subject: below --
2007-12-16 14:35 Daniele (Mastro)
2007-12-17 10:03 ` Takashi Iwai
2007-12-17 14:13 ` Daniele (Mastro)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47BB257A.1080800@gmail.com \
--to=daniele.bilug@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=tdavis@dsl-only.net \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox