Re: PATCH - ESI Juli driver - removed debugs

[Pavel Hofman <pavel.hofman@insite.cz>]

> 
> Takashi Iwai napsal(a):
>> At Tue, 18 Mar 2008 07:56:11 +0100,
>> Pavel Hofman wrote:
>>> Takashi Iwai wrote:
>>>> At Mon, 17 Mar 2008 16:50:39 +0100,
>>>> Pavel Hofman wrote:
>>>>
>>>> Well, then we'll need to find some point to compromise.  Could you
>>>> repost the patch after reducing the callbacks again?
>>>>
>>>> I'll have also no time from the next week at all -- will be on
>>>> vacation for three weeks.  So, let's kick it out soonish :)
>>>>
>>> Hi,
>>>
>>> I am sorry, the previous patch had some debugs enabled. Here is a fixed 
>>> patch.
>>>
>>> Thanks a lot.
>>>
>>> Pavel.
>>>
>>>
>>> Signed-off-by: Pavel Hofman <dustin at seznam.cz>
>>>
>>> * moving most of clock-specific code to card-specific routines
>>> * support for ESI Juli
>>> * to-be-researched - monitoring of analog/digital inputs
>> Thanks.  Now I checked the patch and found it much better now.
>> However, I still think the get_rate_index can be omitted by checking
>> the index from the rate list dynamically.  This looks inefficent but
>> improves the readability and reduces the code size better.  Moreover,
>> the snd_pcm_hw's aren't needed to be prepared for each type.
>>
>> Below is my revised patch.  With this patch, ice->hw_rates must be
>> non-NULL and this is referred in many places.  It cleans up
>> *_internal_clock*() nicely.
>>
> 

Takashi, thanks for commiting the patch. I just noticed the final patch 
does not change the native rates flags in snd_vt1724_playback_pro for 
juli, keeping the unsupported values 8000 - 12000 in the flags. I guess 
if 8kHz rate is played via plughw, plughw will not resample and juli 
will switch to gpios = 0, corresponding to 32kHz.

I can test in the evening, but this is very likely.

Pavel.