alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: SOUND <alsa-devel@alsa-project.org>,
	sound-open-firmware@alsa-project.org
Subject: Re: [Sound-open-firmware] SoF support for 8086:9d71?
Date: Tue, 15 Dec 2020 11:21:19 -0600	[thread overview]
Message-ID: <47ec2533-584c-d7f3-4489-e3a043e658e1@linux.intel.com> (raw)
In-Reply-To: <J74DLQ.CON4PD1O51YN@canonical.com>



On 12/14/20 9:54 PM, Kai-Heng Feng wrote:
> 
> 
> On Mon, Dec 14, 2020 at 13:33, Pierre-Louis Bossart 
> <pierre-louis.bossart@linux.intel.com> wrote:
>>
>>> On more recent kernels legacy HDA stops working for device 8086:9d71:
>>> [   47.211381] snd_hda_intel 0000:00:1f.3: DSP detected with PCI 
>>> \x7fclass/subclass/prog-if info 0x040100
>>> [   47.211383] snd_hda_intel 0000:00:1f.3: Digital mics found on 
>>> \x7fSkylake+ platform, using SST driver
>>>
>>> However, only legacy HDA supports it:
>>> 00:1f.3 Multimedia audio controller [0401]: Intel Corporation 
>>> Sunrise \x7fPoint-LP HD Audio [8086:9d71] (rev 21)
>>> ..
>>>      Kernel modules: snd_hda_intel
>>>
>>> Ubuntu kernel doesn't select SND_SOC_INTEL_SKYLAKE, which builds 
>>> \x7fsnd-soc-skl, because based on the Kconfig description SOF should 
>>> support \x7fit.
>>>
>>> I wonder if SND_SOC_INTEL_SKYLAKE should be select again?
>>
>> SOF does not support Skylake and Kabylake, and only the Up2 board for 
>> APL. I am not sure what you mean by 'recent' kernels since this 
>> dynamic selection has been in place for a year now?
> 
> Ubuntu kernel only changed this in 20.10 release.
> 
>>
>> At any rate, to make this work again:
>>
>> 1. You can select SND_SOC_INTEL_SKYLAKE or alternatively to be more 
>> accurate:
>>
>> SND_SOC_INTEL_SKL
>> SND_SOC_INTEL_APL
>> SND_SOC_INTEL_KBL
>>
>> There are known issues with Conexant codecs, typically on HP devices, 
>> only Realtek codecs are supported.
> 
> Right, so we can't really enable this for generic distros like Ubuntu.
> 
> Let me think of a more generic solution.

Re-thinking about this, I actually don't know how this problem occurred:
the tables are conditionally built so you would only select SST if you 
had the drivers compiled in.

see sound/hda/intel-dsp-config.c:

/* Kabylake-LP */
#if IS_ENABLED(CONFIG_SND_SOC_INTEL_KBL)
	{
		.flags = FLAG_SST,
		.device = 0x9d71,
		.dmi_table = (const struct dmi_system_id []) {
			{
				.ident = "Google Chromebooks",
				.matches = {
					DMI_MATCH(DMI_SYS_VENDOR, "Google"),
				}
			},
			{}
		}
	},
	{
		.flags = FLAG_SST | FLAG_SST_ONLY_IF_DMIC,
		.device = 0x9d71,
	},
#endif

Something's not adding up here.

  reply	other threads:[~2020-12-15 17:22 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-14 16:51 SoF support for 8086:9d71? Kai-Heng Feng
2020-12-14 19:33 ` [Sound-open-firmware] " Pierre-Louis Bossart
2020-12-15  3:54   ` Kai-Heng Feng
2020-12-15 17:21     ` Pierre-Louis Bossart [this message]
2020-12-15 17:48       ` Amadeusz Sławiński
2020-12-15 17:53         ` Kai-Heng Feng
2020-12-15 17:59           ` Pierre-Louis Bossart
2020-12-16  3:55             ` Kai-Heng Feng
2020-12-17  8:25               ` Kai-Heng Feng
2021-01-12 13:25                 ` Amadeusz Sławiński
     [not found]                   ` <CAAd53p7OHhqXDJDuEamXwfseXiUdGfDsJhNJbdUYo_4uoBdzdQ@mail.gmail.com>
2021-01-13 13:44                     ` Amadeusz Sławiński

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47ec2533-584c-d7f3-4489-e3a043e658e1@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=kai.heng.feng@canonical.com \
    --cc=sound-open-firmware@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).