Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "John R." <johnr@wowway.com>
To: alsa-devel@alsa-project.org
Subject: Re: Another unknown bt878
Date: Fri, 02 May 2008 06:40:25 -0500	[thread overview]
Message-ID: <481AFDA9.8040000@wowway.com> (raw)
In-Reply-To: <s5hzlrsdc4h.wl%tiwai@suse.de>

On Thu, Apr 17, 2008 at 12:11:42PM +0200, Takashi Iwai wrote:
 > > At Mon, 14 Apr 2008 23:17:47 -0500,
 > > John R. wrote:
 >> > >
 >> > > Sound doesn't work on my bt878 based card.  Let me know what other
 >> > > information is needed...
 > >
 > > Please elaborate what "sound doesn't work" means?

Looks like I don't fully understand how it is not working.  I could be 
pretty far off base with what I am trying...

amixer settings for each of the 4 devices that comes up:

amixer -c1
Simple mixer control 'FM',0
   Capabilities: cswitch cswitch-joined cswitch-exclusive
   Capture exclusive group: 0
   Capture channels: Mono
   Mono: Capture [off]
Simple mixer control 'Mic/Line',0
   Capabilities: cswitch cswitch-joined cswitch-exclusive
   Capture exclusive group: 0
   Capture channels: Mono
   Mono: Capture [off]
Simple mixer control 'Capture',0
   Capabilities: cvolume
   Capture channels: Mono
   Limits: Capture 0 - 15
   Mono: Capture 15 [100%]
Simple mixer control 'Capture Boost',0
   Capabilities: pswitch pswitch-joined
   Playback channels: Mono
   Mono: Playback [on]
Simple mixer control 'TV Tuner',0
   Capabilities: cswitch cswitch-joined cswitch-exclusive
   Capture exclusive group: 0
   Capture channels: Mono
   Mono: Capture [on]

Recording doesn't generate an error (not sure about device to use):

arecord -D hw:2,1 -f S16_LE -t wav test.wav
Recording WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
Warning: rate is not accurate (requested = 8000Hz, got = 119466Hz)
          please, try the plug plugin

However, there is silience in the resultant wav file.

if possible, let me know what direction I should go in to debug this 
further.

Thanks,

John

 > >
 >> > >
 >> > > kernel 2.6.24.2:
 >> > >
 >> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa00:0x1460
 >> > > Apr 14 20:28:38 server kernel: please mail id, board name, and, 
if it
 >> > > works, the correct digital_rate option to 
<alsa-devel@alsa-project.org>
 >> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 
0000:05:00.1[A] ->
 >> > > GSI 18 (level, low) -> IRQ 18
 >> > > Apr 14 20:28:38 server kernel: bt87x0: Using board 0, analog, 
digital
 >> > > (rate 32000 Hz)
 >> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa01:0x1461
 >> > > Apr 14 20:28:38 server kernel: please mail id, board name, and, 
if it
 >> > > works, the correct digital_rate option to 
<alsa-devel@alsa-project.org>
 >> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 
0000:05:01.1[A] ->
 >> > > GSI 19 (level, low) -> IRQ 19
 >> > > Apr 14 20:28:38 server kernel: bt87x1: Using board 0, analog, 
digital
 >> > > (rate 32000 Hz)
 >> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa02:0x1462
 >> > > Apr 14 20:28:38 server kernel: please mail id, board name, and, 
if it
 >> > > works, the correct digital_rate option to 
<alsa-devel@alsa-project.org>
 >> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 
0000:05:02.1[A] ->
 >> > > GSI 16 (level, low) -> IRQ 16
 >> > > Apr 14 20:28:38 server kernel: bt87x2: Using board 0, analog, 
digital
 >> > > (rate 3200
 >> > > 0 Hz)
 >> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa03:0x1463
 >> > > Apr 14 20:28:38 server kernel: please mail id, board name, and, 
if it
 >> > > works, the correct digital_rate option to 
<alsa-devel@alsa-project.org>
 >> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 
0000:05:03.1[A] ->
 >> > > GSI 17 (level, low) -> IRQ 17
 >> > > Apr 14 20:28:38 server kernel: bt87x3: Using board 0, analog, 
digital
 >> > > (rate 32000 Hz)
 >> > >
 >> > > lspci:
 >> > >
 >> > > 05:00.0 Multimedia video controller: Brooktree Corporation Bt878 
Video
 >> > > Capture (rev 11)
 >> > > 05:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio 
Capture
 >> > > (rev 11)
 >> > > 05:01.0 Multimedia video controller: Brooktree Corporation Bt878 
Video
 >> > > Capture (rev 11)
 >> > > 05:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio 
Capture
 >> > > (rev 11)
 >> > > 05:02.0 Multimedia video controller: Brooktree Corporation Bt878 
Video
 >> > > Capture (rev 11)
 >> > > 05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio 
Capture
 >> > > (rev 11)
 >> > > 05:03.0 Multimedia video controller: Brooktree Corporation Bt878 
Video
 >> > > Capture (rev 11)
 >> > > 05:03.1 Multimedia controller: Brooktree Corporation Bt878 Audio 
Capture
 >> > > (rev 11)
 >> > >
 >> > > at boot:
 >> > >
 >> > > bttv: driver version 0.9.17 loaded
 >> > > bttv: using 8 buffers with 2080k (520 pages) each for capture
 >> > > bttv: Bt8xx card found (0).
 >> > > ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
 >> > > bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 18, latency: 64, mmio:
 >> > > 0xdfcfe000
 >> > > bttv0: detected: Provideo PV150A-1 [card=98], PCI subsystem ID 
is aa00:1460
 >> > > bttv0: using: ProVideo PV150 [card=98,autodetected]
 >> > > bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
 >> > > bttv0: tuner absent
 >> > > bttv0: registered device video0
 >> > > bttv0: registered device vbi0
 >> > > bttv0: PLL: 28636363 => 35468950 .. ok
 >> > > bttv: Bt8xx card found (1).
 >> > > ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19
 >> > > bttv1: Bt878 (rev 17) at 0000:05:01.0, irq: 19, latency: 64, mmio:
 >> > > 0xdfcfc000
 >> > > bttv1: detected: Provideo PV150A-2 [card=98], PCI subsystem ID 
is aa01:1461
 >> > > bttv1: using: ProVideo PV150 [card=98,autodetected]
 >> > > bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init]
 >> > > bttv1: tuner absent
 >> > > bttv1: registered device video1
 >> > > bttv1: registered device vbi1
 >> > > bttv1: PLL: 28636363 => 35468950 .. ok
 >> > > bttv: Bt8xx card found (2).
 >> > > ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 16 (level, low) -> IRQ 16
 >> > > bttv2: Bt878 (rev 17) at 0000:05:02.0, irq: 16, latency: 64, mmio:
 >> > > 0xdfcfa000
 >> > > bttv2: detected: Provideo PV150A-3 [card=98], PCI subsystem ID 
is aa02:1462
 >> > > bttv2: using: ProVideo PV150 [card=98,autodetected]
 >> > > bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init]
 >> > > bttv2: tuner absent
 >> > > bttv2: registered device video2
 >> > > bttv2: registered device vbi2
 >> > > bttv2: PLL: 28636363 => 35468950 .. ok
 >> > > bttv: Bt8xx card found (3).
 >> > > ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 17 (level, low) -> IRQ 17
 >> > > bttv3: Bt878 (rev 17) at 0000:05:03.0, irq: 17, latency: 64, mmio:
 >> > > 0xdfcf8000
 >> > > bttv3: detected: Provideo PV150A-4 [card=98], PCI subsystem ID 
is aa03:1463
 >> > > bttv3: using: ProVideo PV150 [card=98,autodetected]
 >> > > bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init]
 >> > > bttv3: tuner absent
 >> > > bttv3: registered device video3
 >> > > bttv3: registered device vbi3
 >> > > bttv3: PLL: 28636363 => 35468950 .. ok
 >> > >
 >> > >
 >> > > _______________________________________________
 >> > > Alsa-devel mailing list
 >> > > Alsa-devel@alsa-project.org
 >> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
 >> > >
 > > _______________________________________________
 > > Alsa-devel mailing list
 > > Alsa-devel@alsa-project.org
 > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

      reply	other threads:[~2008-05-02 11:38 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-15  4:17 Another unknown bt878 John R.
2008-04-17 10:11 ` Takashi Iwai
2008-05-02 11:40   ` John R. [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=481AFDA9.8040000@wowway.com \
    --to=johnr@wowway.com \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox