Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: "John R." <johnr@wowway.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: Another unknown bt878
Date: Thu, 17 Apr 2008 12:11:42 +0200	[thread overview]
Message-ID: <s5hzlrsdc4h.wl%tiwai@suse.de> (raw)
In-Reply-To: <48042C6B.9090306@wowway.com>

At Mon, 14 Apr 2008 23:17:47 -0500,
John R. wrote:
> 
> Sound doesn't work on my bt878 based card.  Let me know what other 
> information is needed...

Please elaborate what "sound doesn't work" means?


Takashi

> 
> kernel 2.6.24.2:
> 
> Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa00:0x1460
> Apr 14 20:28:38 server kernel: please mail id, board name, and, if it 
> works, the correct digital_rate option to <alsa-devel@alsa-project.org>
> Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:00.1[A] -> 
> GSI 18 (level, low) -> IRQ 18
> Apr 14 20:28:38 server kernel: bt87x0: Using board 0, analog, digital 
> (rate 32000 Hz)
> Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa01:0x1461
> Apr 14 20:28:38 server kernel: please mail id, board name, and, if it 
> works, the correct digital_rate option to <alsa-devel@alsa-project.org>
> Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:01.1[A] -> 
> GSI 19 (level, low) -> IRQ 19
> Apr 14 20:28:38 server kernel: bt87x1: Using board 0, analog, digital 
> (rate 32000 Hz)
> Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa02:0x1462
> Apr 14 20:28:38 server kernel: please mail id, board name, and, if it 
> works, the correct digital_rate option to <alsa-devel@alsa-project.org>
> Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:02.1[A] -> 
> GSI 16 (level, low) -> IRQ 16
> Apr 14 20:28:38 server kernel: bt87x2: Using board 0, analog, digital 
> (rate 3200
> 0 Hz)
> Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa03:0x1463
> Apr 14 20:28:38 server kernel: please mail id, board name, and, if it 
> works, the correct digital_rate option to <alsa-devel@alsa-project.org>
> Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:03.1[A] -> 
> GSI 17 (level, low) -> IRQ 17
> Apr 14 20:28:38 server kernel: bt87x3: Using board 0, analog, digital 
> (rate 32000 Hz)
> 
> lspci:
> 
> 05:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video 
> Capture (rev 11)
> 05:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture 
> (rev 11)
> 05:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video 
> Capture (rev 11)
> 05:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture 
> (rev 11)
> 05:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video 
> Capture (rev 11)
> 05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture 
> (rev 11)
> 05:03.0 Multimedia video controller: Brooktree Corporation Bt878 Video 
> Capture (rev 11)
> 05:03.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture 
> (rev 11)
> 
> at boot:
> 
> bttv: driver version 0.9.17 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
> bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 18, latency: 64, mmio: 
> 0xdfcfe000
> bttv0: detected: Provideo PV150A-1 [card=98], PCI subsystem ID is aa00:1460
> bttv0: using: ProVideo PV150 [card=98,autodetected]
> bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
> bttv0: tuner absent
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: PLL: 28636363 => 35468950 .. ok
> bttv: Bt8xx card found (1).
> ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19
> bttv1: Bt878 (rev 17) at 0000:05:01.0, irq: 19, latency: 64, mmio: 
> 0xdfcfc000
> bttv1: detected: Provideo PV150A-2 [card=98], PCI subsystem ID is aa01:1461
> bttv1: using: ProVideo PV150 [card=98,autodetected]
> bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init]
> bttv1: tuner absent
> bttv1: registered device video1
> bttv1: registered device vbi1
> bttv1: PLL: 28636363 => 35468950 .. ok
> bttv: Bt8xx card found (2).
> ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 16 (level, low) -> IRQ 16
> bttv2: Bt878 (rev 17) at 0000:05:02.0, irq: 16, latency: 64, mmio: 
> 0xdfcfa000
> bttv2: detected: Provideo PV150A-3 [card=98], PCI subsystem ID is aa02:1462
> bttv2: using: ProVideo PV150 [card=98,autodetected]
> bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init]
> bttv2: tuner absent
> bttv2: registered device video2
> bttv2: registered device vbi2
> bttv2: PLL: 28636363 => 35468950 .. ok
> bttv: Bt8xx card found (3).
> ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 17 (level, low) -> IRQ 17
> bttv3: Bt878 (rev 17) at 0000:05:03.0, irq: 17, latency: 64, mmio: 
> 0xdfcf8000
> bttv3: detected: Provideo PV150A-4 [card=98], PCI subsystem ID is aa03:1463
> bttv3: using: ProVideo PV150 [card=98,autodetected]
> bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init]
> bttv3: tuner absent
> bttv3: registered device video3
> bttv3: registered device vbi3
> bttv3: PLL: 28636363 => 35468950 .. ok
> 
> 
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> 

  reply	other threads:[~2008-04-17 10:11 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-15  4:17 Another unknown bt878 John R.
2008-04-17 10:11 ` Takashi Iwai [this message]
2008-05-02 11:40   ` John R.

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hzlrsdc4h.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=johnr@wowway.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox