From: "Guillem Solà" <garanda@flumotion.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: Issue with creative Xfi PCIe ca0110-IBG
Date: Tue, 13 Oct 2009 17:01:35 +0200 [thread overview]
Message-ID: <4AD4964F.2060602@flumotion.com> (raw)
In-Reply-To: <s5h8wffz87n.wl%tiwai@suse.de>
Takashi Iwai wrote:
> At Tue, 13 Oct 2009 16:12:47 +0200,
> Guillem Solà wrote:
>
>> Takashi Iwai wrote:
>>
>>> At Tue, 13 Oct 2009 14:10:44 +0200,
>>> Guillem Solà wrote:
>>>
>>>
>>>> Takashi Iwai wrote:
>>>>
>>>>
>>>>> It shows the address 1. So, my patch doesn't work, as it assumes
>>>>> address 0. Replace it with 1, and pass probe_mask=0x02.
>>>>>
>>>>>
>>>>> Takashi
>>>>>
>>>>>
>>>>>
>>>>>
>>>> Yeah great, it's working again!
>>>>
>>>> I did modprobe snd-hda-intel probe_mask=0x03 instead of mask=0x02 to
>>>> make it work
>>>>
>>>> and the patch let this way ( I changed both return 1 and addr=1)
>>>>
>>>>
>>> Now the question is whether probe_mask=0x03 (or 0x02) works without
>>> this patch. How is it?
>>>
>>>
>>> thanks,
>>>
>>>
>>>
>> Hi,
>>
>> after few tests I can conclude that it could work with and without the
>> patch. The same happens with modprobe snd-hda-intel probe_mask=0x03 or
>> 0x02 both can work.
>>
>
> OK, good to hear.
>
>
>> So it seems to be fickle because not all the times you modprobe the
>> intel module it worked.
>>
>
> Do you mean it's still unstable even with probe_mask option, or it is
> when without?
>
> If probe_mask fixes its fickleness (or flirtation :), the patch below
> should help. It will set the default probe_mask for your device.
> Give it a try.
>
>
> Takashi
>
>
Hi,
By fickle I mean that when modprobing hda-intel module sometimes it
works fine and others cannot get audio although the system seems to
always recognize the card, and yes, I'm always using probe_mask=0x02 option.
Actually, about one of five times I can successfully load the module. As
I said the first patch doesn't affect, it has been only the casualty
that made me believe it did something.
When module loads successfully I can see in dmesg
HDA Intel 0000:05:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
hda_intel: probe_mask set to 0x2 for device 1102:0018
hda-intel: Invalid position buffer, using LPIB read method instead.
or:
HDA Intel 0000:05:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
hda_intel: probe_mask set to 0x2 for device 1102:0018
hda-intel: spurious response 0x0:0x0, last cmd=0x000000
hda-intel: Invalid position buffer, using LPIB read method instead.
And when the module doesn't load properly
HDA Intel 0000:05:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
hda_intel: probe_mask set to 0x2 for device 1102:0018
hda-intel: spurious response 0x0:0x0, last cmd=0x000000
hda-intel: azx_get_response timeout, switching to polling mode: last
cmd=0x107f0d00
hda_intel: azx_get_response timeout, switching to single_cmd mode: last
cmd=0x107f0d00
__ratelimit: 28 callbacks suppressed
Thanks,
Guillem Solà
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2009-10-13 15:01 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-09 9:19 Issue with creative Xfi PCIe ca0110-IBG Guillem Solà
2009-10-09 9:38 ` Takashi Iwai
2009-10-09 14:15 ` Guillem Solà
2009-10-09 14:36 ` Takashi Iwai
2009-10-09 15:17 ` Guillem Solà
2009-10-09 16:05 ` Guillem Solà
2009-10-09 16:13 ` Takashi Iwai
2009-10-13 8:48 ` Guillem Solà
2009-10-13 9:14 ` Takashi Iwai
2009-10-13 9:59 ` Guillem Solà
2009-10-13 10:06 ` Takashi Iwai
2009-10-13 10:26 ` Guillem Solà
2009-10-13 10:39 ` Takashi Iwai
2009-10-13 11:28 ` Guillem Solà
2009-10-13 11:31 ` Takashi Iwai
2009-10-13 12:10 ` Guillem Solà
2009-10-13 12:34 ` Takashi Iwai
2009-10-13 14:12 ` Guillem Solà
2009-10-13 14:20 ` Takashi Iwai
2009-10-13 15:01 ` Guillem Solà [this message]
2009-10-13 15:21 ` Takashi Iwai
2009-10-13 16:59 ` Guillem Solà
2009-10-14 15:48 ` Takashi Iwai
2009-10-14 16:03 ` Guillem Solà
2009-10-14 16:09 ` Takashi Iwai
2009-10-15 9:52 ` Guillem Solà
-- strict thread matches above, loose matches on Subject: below --
2009-10-17 10:30 Philippe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AD4964F.2060602@flumotion.com \
--to=garanda@flumotion.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox