From: "Guillem Solà" <garanda@flumotion.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: Issue with creative Xfi PCIe ca0110-IBG
Date: Tue, 13 Oct 2009 18:59:23 +0200 [thread overview]
Message-ID: <4AD4B1EB.3080401@flumotion.com> (raw)
In-Reply-To: <s5h1vl7z5eg.wl%tiwai@suse.de>
Takashi Iwai wrote:
> At Tue, 13 Oct 2009 17:01:35 +0200,
> Guillem Solà wrote:
>
>> Takashi Iwai wrote:
>>
>>> At Tue, 13 Oct 2009 16:12:47 +0200,
>>> Guillem Solà wrote:
>>>
>>>
>>>> Takashi Iwai wrote:
>>>>
>>>>
>>>>> At Tue, 13 Oct 2009 14:10:44 +0200,
>>>>> Guillem Solà wrote:
>>>>>
>>>>>
>>>>>
>>>>>> Takashi Iwai wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>> It shows the address 1. So, my patch doesn't work, as it assumes
>>>>>>> address 0. Replace it with 1, and pass probe_mask=0x02.
>>>>>>>
>>>>>>>
>>>>>>> Takashi
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> Yeah great, it's working again!
>>>>>>
>>>>>> I did modprobe snd-hda-intel probe_mask=0x03 instead of mask=0x02 to
>>>>>> make it work
>>>>>>
>>>>>> and the patch let this way ( I changed both return 1 and addr=1)
>>>>>>
>>>>>>
>>>>>>
>>>>> Now the question is whether probe_mask=0x03 (or 0x02) works without
>>>>> this patch. How is it?
>>>>>
>>>>>
>>>>> thanks,
>>>>>
>>>>>
>>>>>
>>>>>
>>>> Hi,
>>>>
>>>> after few tests I can conclude that it could work with and without the
>>>> patch. The same happens with modprobe snd-hda-intel probe_mask=0x03 or
>>>> 0x02 both can work.
>>>>
>>>>
>>> OK, good to hear.
>>>
>>>
>>>
>>>> So it seems to be fickle because not all the times you modprobe the
>>>> intel module it worked.
>>>>
>>>>
>>> Do you mean it's still unstable even with probe_mask option, or it is
>>> when without?
>>>
>>> If probe_mask fixes its fickleness (or flirtation :), the patch below
>>> should help. It will set the default probe_mask for your device.
>>> Give it a try.
>>>
>>>
>>> Takashi
>>>
>>>
>>>
>> Hi,
>>
>> By fickle I mean that when modprobing hda-intel module sometimes it
>> works fine and others cannot get audio although the system seems to
>> always recognize the card, and yes, I'm always using probe_mask=0x02 option.
>>
>> Actually, about one of five times I can successfully load the module. As
>> I said the first patch doesn't affect, it has been only the casualty
>> that made me believe it did something.
>>
>
> Hm, then it's still puzzling what causes the problem in the recent
> kernel. Or is it coincidence?
>
>
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
Uff, really don't know what to say, when I thought I saw some light...
I've been testing with 2.6.31-rc6 and 2.6.31 (final) with and without
patches and maybe is only the probe_mask option what make it work sometimes.
Perhaps I did bisect bad and wasn't
deadff1665491afce124a8ff83f00f784161f660 first bad commit?
regards,
Guillem Solà
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2009-10-13 16:59 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-09 9:19 Issue with creative Xfi PCIe ca0110-IBG Guillem Solà
2009-10-09 9:38 ` Takashi Iwai
2009-10-09 14:15 ` Guillem Solà
2009-10-09 14:36 ` Takashi Iwai
2009-10-09 15:17 ` Guillem Solà
2009-10-09 16:05 ` Guillem Solà
2009-10-09 16:13 ` Takashi Iwai
2009-10-13 8:48 ` Guillem Solà
2009-10-13 9:14 ` Takashi Iwai
2009-10-13 9:59 ` Guillem Solà
2009-10-13 10:06 ` Takashi Iwai
2009-10-13 10:26 ` Guillem Solà
2009-10-13 10:39 ` Takashi Iwai
2009-10-13 11:28 ` Guillem Solà
2009-10-13 11:31 ` Takashi Iwai
2009-10-13 12:10 ` Guillem Solà
2009-10-13 12:34 ` Takashi Iwai
2009-10-13 14:12 ` Guillem Solà
2009-10-13 14:20 ` Takashi Iwai
2009-10-13 15:01 ` Guillem Solà
2009-10-13 15:21 ` Takashi Iwai
2009-10-13 16:59 ` Guillem Solà [this message]
2009-10-14 15:48 ` Takashi Iwai
2009-10-14 16:03 ` Guillem Solà
2009-10-14 16:09 ` Takashi Iwai
2009-10-15 9:52 ` Guillem Solà
-- strict thread matches above, loose matches on Subject: below --
2009-10-17 10:30 Philippe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AD4B1EB.3080401@flumotion.com \
--to=garanda@flumotion.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox