[PATCH v2] ASoC: tlv320aic3x: add missing registers and bits

["Prchal Jiří" <jiri.prchal@aksignal.cz>]

Second version of patch keeping formatting.
Adds missing register default values to cache.
Adds register and bits definitions in header file.
Changes are for TLV320AIC310x based on data sheet.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>

--- /home/prchal/arm/fw-cdu/linux/linux-3.5-rc3/sound/soc/codecs/tlv320aic3x.c.orig
+++ /home/prchal/arm/fw-cdu/linux/linux-3.5-rc3/sound/soc/codecs/tlv320aic3x.c.new
@@ -122,7 +122,9 @@
  	0x00, 0x00, 0x00, 0x00,	/* 88 */
  	0x00, 0x00, 0x00, 0x00,	/* 92 */
  	0x00, 0x00, 0x00, 0x00,	/* 96 */
-	0x00, 0x00, 0x02,	/* 100 */
+	0x00, 0x00, 0x02, 0x00,	/* 100 */
+	0x00, 0x00, 0x00, 0x00,	/* 104 */
+	0x00, 0x00,             /* 108 */
  };

--- /home/prchal/arm/fw-cdu/linux/linux-3.5-rc3/sound/soc/codecs/tlv320aic3x.h
+++ /home/prchal/arm/fw-cdu/linux/linux-3.5-rc3/sound/soc/codecs/tlv320aic3x.h.new
@@ -13,7 +13,7 @@
  #define _AIC3X_H

  /* AIC3X register space */
-#define AIC3X_CACHEREGNUM		103
+#define AIC3X_CACHEREGNUM		110

  /* Page select register */
  #define AIC3X_PAGE_SELECT		0
@@ -74,6 +74,8 @@
  #define HPLCOM_CFG			37
  /* Right High Power Output control registers */
  #define HPRCOM_CFG			38
+/* High Power Output Stage Control Register */
+#define HPOUT_SC			40
  /* DAC Output Switching control registers */
  #define DAC_LINE_MUX			41
  /* High Power Output Driver Pop Reduction registers */
@@ -148,6 +150,17 @@
  #define AIC3X_GPIOB_REG			101
  /* Clock generation control register */
  #define AIC3X_CLKGEN_CTRL_REG		102
+/* New AGC registers */
+#define LAGCN_ATTACK			103
+#define LAGCN_DECAY			104
+#define RAGCN_ATTACK			105
+#define RAGCN_DECAY			106
+/* New Programmable ADC Digital Path and I2C Bus Condition Register */
+#define NEW_ADC_DIGITALPATH		107
+/* Passive Analog Signal Bypass Selection During Powerdown Register */
+#define PASSIVE_BYPASS			108
+/* DAC Quiescent Current Adjustment Register */
+#define DAC_ICC_ADJ			109

  /* Page select register bits */
  #define PAGE0_SELECT		0
@@ -163,6 +176,10 @@
  #define DUAL_RATE_MODE		((1 << 5) | (1 << 6))
  #define LDAC2LCH		(0x1 << 3)
  #define RDAC2RCH		(0x1 << 1)
+#define LDAC2RCH		(0x2 << 3)
+#define RDAC2LCH		(0x2 << 1)
+#define LDAC2MONOMIX		(0x3 << 3)
+#define RDAC2MONOMIX		(0x3 << 1)

  /* PLL registers bitfields */
  #define PLLP_SHIFT		0