From: "Prchal Jiří" <jiri.prchal@aksignal.cz>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: vbarinov@embeddedalley.com, alsa-devel@alsa-project.org,
sudhakar.raj@ti.com, nsekhar@ti.com, peter.ujfalusi@ti.com,
mr.swami.reddy@ti.com, lrg@ti.com
Subject: [PATCH] ASoC: tlv320aic3x: add missing registers and bits
Date: Tue, 03 Jul 2012 11:41:43 +0200 [thread overview]
Message-ID: <4FF2BE57.3050602@aksignal.cz> (raw)
In-Reply-To: <20120627120130.GJ308@opensource.wolfsonmicro.com>
Adds missing register default values to cache.
Adds register and bit shift definitions in header file.
Changes are for TLV320AIC310x based on data sheet.
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
---
sound/soc/codecs/tlv320aic3x.c | 4 +++-
sound/soc/codecs/tlv320aic3x.h | 19 ++++++++++++++++++-
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 7a49390..bd03f4d 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -119,7 +119,9 @@ static const u8 aic3x_reg[AIC3X_CACHEREGNUM] = {
0x00, 0x00, 0x00, 0x00, /* 88 */
0x00, 0x00, 0x00, 0x00, /* 92 */
0x00, 0x00, 0x00, 0x00, /* 96 */
- 0x00, 0x00, 0x02, /* 100 */
+ 0x00, 0x00, 0x02, 0x00, /* 100 */
+ 0x00, 0x00, 0x00, 0x00, /* 104 */
+ 0x00, 0x00, /* 108 */
};
/*
diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h
index 06a1978..586c5d5 100644
--- a/sound/soc/codecs/tlv320aic3x.h
+++ b/sound/soc/codecs/tlv320aic3x.h
@@ -13,7 +13,7 @@
#define _AIC3X_H
/* AIC3X register space */
-#define AIC3X_CACHEREGNUM 103
+#define AIC3X_CACHEREGNUM 110
/* Page select register */
#define AIC3X_PAGE_SELECT 0
@@ -74,6 +74,8 @@
#define HPLCOM_CFG 37
/* Right High Power Output control registers */
#define HPRCOM_CFG 38
+/* High Power Output Stage Control Register */
+#define HPOUT_SC 40
/* DAC Output Switching control registers */
#define DAC_LINE_MUX 41
/* High Power Output Driver Pop Reduction registers */
@@ -148,6 +150,17 @@
#define AIC3X_GPIOB_REG 101
/* Clock generation control register */
#define AIC3X_CLKGEN_CTRL_REG 102
+/* New AGC registers */
+#define LAGCN_ATTACK 103
+#define LAGCN_DECAY 104
+#define RAGCN_ATTACK 105
+#define RAGCN_DECAY 106
+/* New Programmable ADC Digital Path and I2C Bus Condition Register */
+#define NEW_ADC_DIGITALPATH 107
+/* Passive Analog Signal Bypass Selection During Powerdown Register */
+#define PASSIVE_BYPASS 108
+/* DAC Quiescent Current Adjustment Register */
+#define DAC_ICC_ADJ 109
/* Page select register bits */
#define PAGE0_SELECT 0
@@ -163,6 +176,10 @@
#define DUAL_RATE_MODE ((1 << 5) | (1 << 6))
#define LDAC2LCH (0x1 << 3)
#define RDAC2RCH (0x1 << 1)
+#define LDAC2RCH (0x2 << 3)
+#define RDAC2LCH (0x2 << 1)
+#define LDAC2MONOMIX (0x3 << 3)
+#define RDAC2MONOMIX (0x3 << 1)
/* PLL registers bitfields */
#define PLLP_SHIFT 0
--
1.7.7
next prev parent reply other threads:[~2012-07-03 9:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-27 6:06 [PATCH v2] ASoC: tlv320aic3x: add missing registers and bits Prchal Jiří
2012-06-27 12:01 ` Mark Brown
2012-06-27 13:01 ` [PATCH v3] " Prchal Jiří
2012-07-01 18:31 ` Mark Brown
2012-07-03 9:41 ` Prchal Jiří [this message]
2012-07-03 18:53 ` [PATCH] " Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2012-06-26 12:38 Prchal Jiří
2012-06-26 13:21 ` Mark Brown
2012-06-26 14:56 ` Roberto Nibali
2012-06-26 16:33 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FF2BE57.3050602@aksignal.cz \
--to=jiri.prchal@aksignal.cz \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@ti.com \
--cc=mr.swami.reddy@ti.com \
--cc=nsekhar@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=sudhakar.raj@ti.com \
--cc=vbarinov@embeddedalley.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox