Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Troy Kisky <troy.kisky@boundarydevices.com>
To: Fabio Estevam <festevam@gmail.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
	alsa-devel@alsa-project.org, lars@metafoo.de,
	matt@genesi-usa.com, eric.nelson@boundarydevices.com,
	broonie@kernel.org
Subject: Re: [PATCH v5 2/2] ASoC: sgtl5000: Fix driver probe after reset
Date: Fri, 10 May 2013 12:11:28 -0700	[thread overview]
Message-ID: <518D4660.9070202@boundarydevices.com> (raw)
In-Reply-To: <CAOMZO5AoWqhSdH5WVu=TFgejis=8mWNGYyHneRc5idwCd8RZWA@mail.gmail.com>

On 5/9/2013 7:12 PM, Fabio Estevam wrote:
> On Thu, May 9, 2013 at 10:17 PM, Troy Kisky
> <troy.kisky@boundarydevices.com> wrote:
>
>> Did you test a reset/reboot ?  Since the fill_defaults now happens after the
>> read of the device id,
>> how does this fix the mentioned problem ?
> Yes, tested several times :-)
>
> The chip ID has to be read from the register and it always read
> correctly. In patch 1/2, I  just moved the reading to a more standard
> location (in i2c_probe function), just like many other codecs do.
>
> Patch 2/2 fixes the issue by ensuring that we start from sane values
> from power-on reset.
>
> Let's look at the original error:
>
> sgtl5000 0-000a: Device with ID register ffff is not a sgtl5000
> sgtl5000 0-000a: ASoC: failed to probe CODEC -19
> imx-sgtl5000 sound.12: ASoC: failed to instantiate card -19
> imx-sgtl5000 sound.12: snd_soc_register_card failed (-19)
>
> If I move the chip ID reading to i2c_probe (ie, only apply patch 1/2),
> the device ID would be read correctly, but the fail would happen at a
> later point:
>
> sgtl5000 0-000a: sgtl5000 revision 0x11
> sgtl5000 0-000a: Failed to get supply 'VDDD': -517
>   mmcblk0: p1
> 0-000a: 1200 mV normal
> sgtl5000 0-000a: Using internal LDO instead of VDDD
> usb 2-1: new high-speed USB device number 2 using ci_hdrc
> hub 2-1:1.0: USB hub found
> hub 2-1:1.0: 3 ports detected
> sgtl5000 0-000a: ASoC: failed to probe CODEC -110
> imx-sgtl5000 sound.12: ASoC: failed to instantiate card -110
> imx-sgtl5000 sound.12: snd_soc_register_card failed (-110)
> imx-sgtl5000: probe of sound.12 failed with error -110

Shouldn't you update your commit log with this then ?
>
> So the original issue was not about reading the chip ID correctly.
>
> The power related registers change from POR to reset (among others)
>
> If the chip is not properly powered, then we are not able to read its
> ID and we get that original error.
>

Thanks for fixing, I guess I don't need to understand how the fix works.

Troy

  parent reply	other threads:[~2013-05-10 19:11 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-10  0:15 [PATCH v5 1/2] ASoC: sgtl5000: Read SGTL5000_CHIP_ID in i2c_probe() Fabio Estevam
2013-05-10  0:15 ` [PATCH v5 2/2] ASoC: sgtl5000: Fix driver probe after reset Fabio Estevam
2013-05-10  1:17   ` Troy Kisky
2013-05-10  2:12     ` Fabio Estevam
     [not found]       ` <CAKGA1bnhE3dZe8P+aJm+cps+Rp4abSGOMmPckGw_0fCnh9e6+A@mail.gmail.com>
2013-05-10 17:31         ` Fabio Estevam
2013-05-10 19:11       ` Troy Kisky [this message]
2013-05-10 19:16         ` Troy Kisky
2013-05-10 19:18           ` Fabio Estevam
2013-05-10 19:39             ` Fabio Estevam
2013-05-10 20:56               ` Mark Brown
2013-05-10 20:58                 ` Mark Brown
2013-05-10 20:13             ` Troy Kisky
2013-05-10 19:23         ` Fabio Estevam
2013-05-10  9:16   ` Mark Brown
2013-05-10 16:38   ` Eric Nelson
2013-05-10 20:59   ` Mark Brown
2013-05-10  9:15 ` [PATCH v5 1/2] ASoC: sgtl5000: Read SGTL5000_CHIP_ID in i2c_probe() Mark Brown
2013-05-10 16:37 ` Eric Nelson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=518D4660.9070202@boundarydevices.com \
    --to=troy.kisky@boundarydevices.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=eric.nelson@boundarydevices.com \
    --cc=fabio.estevam@freescale.com \
    --cc=festevam@gmail.com \
    --cc=lars@metafoo.de \
    --cc=matt@genesi-usa.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox