From: Joschi Brauchle <joschi.brauchle@tum.de>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: No sound on Thinkpad T440s in Docking Station
Date: Fri, 02 May 2014 11:02:15 +0200 [thread overview]
Message-ID: <53635F17.4050202@tum.de> (raw)
In-Reply-To: <s5hzjj0r3ob.wl%tiwai@suse.de>
[-- Attachment #1.1: Type: text/plain, Size: 2887 bytes --]
On 05/02/2014 10:21 AM, Takashi Iwai wrote:
> At Fri, 02 May 2014 10:16:10 +0200,
> Joschi Brauchle wrote:
>>
>> On 05/02/2014 09:31 AM, Takashi Iwai wrote:
>>> At Wed, 30 Apr 2014 19:05:24 +0200,
>>> Joschi Brauchle wrote:
>>>>
>>>>
>>>>
>>>> On 04/30/2014 06:43 PM, Takashi Iwai wrote:
>>>>> At Wed, 30 Apr 2014 10:56:48 +0200,
>>>>> Joschi Brauchle wrote:
>>>>>>
>>>>>> Dear all,
>>>>>>
>>>>>> using openSUSE 13.1 on an Thinkpad T440s, I am not getting sound once
>>>>>> the laptop is docked to its docking station.
>>>>>>
>>>>>> I suspect an additional SND_PCI_QUIRK is needed for this model.
>>>>>> "pactl list" returns
>>>>>> ----------------
>>>>>> alsa.mixer_name = "Realtek ALC292"
>>>>>> alsa.components = "HDA:10ec0292,17aa220c,00100001"
>>>>>> ----------------
>>>>>> for the analog audio output sink in docked state.
>>>>>>
>>>>>> Hence I assume a new line *similar* to this
>>>>>> ----------------
>>>>>> SND_PCI_QUIRK(0x17aa, 0x220c, "Thinkpad T440s", ALC269_FIXUP_LENOVO_DOCK),
>>>>>> ----------------
>>>>>> is needed?
>>>>>> What about the ALC292 instead of 269 Realtek chip...?
>>>>>
>>>>> It's a compatible chip, so the codec name doesn't matter.
>>>>> You can try it with model=lenovo-dock option with the recent kernels.
>>>>> For Haswell, it's safer to pass twice
>>>>> (model=lenovo-dock,lenovo-dock).
>>>>>
>>>>> Let us know if this works for you.
>>>>>
>>>>>
>>>>> Takashi
>>>>>
>>>> Hi Takashi,
>>>>
>>>> so i have:
>>>> ------------------ /etc/modprobe.d/50-sound.conf -------------------
>>>>
>>>> options snd-hda-intel model=lenovo-dock,lenovo-dock
>>>> options snd slots=snd-hda-intel,snd-hda-intel
>>>> # 3hqH.vsazS+ZIdb9:Intel Corporation
>>>> alias snd-card-0 snd-hda-intel
>>>> # u1Nb.8dI5aUgInHB:Intel Corporation
>>>> alias snd-card-1 snd-hda-intel
>>>> ------------------
>>>> and rebooted, but still get no sound from the headphone jack on the
>>>> dock, although the built-in speakers immediately mute when plugging in
>>>> headphones.
>>>
>>> Give alsa-info.sh output with that state for further checking.
>>>
>>>
>>> Takashi
>>>
>>
>> Please find alsa-info attached while docking and with
>> "model=lenovo-dock,lenovo-dock" option.
>
> Did you take alsa-info.sh output while you're plugging to the dock
> headphone jack? With the setup, it's NID 0x1b, and "Dock Headphone
> Jack" control should be "true" when properly detected.
>
> Maybe you'd be better to figure out which dock pin corresponds to
> which at first. hda-jack-retask should be your help.
>
>
> Takashi
>
Hi,
yes, alsa-info.sh was created while the laptop was docked and headphones
plugged in at the docking station headphone jack.
I installed hda-jack-retask and played with it a little bit, but I'm
rather lost...
What exactly whould I try to do with it?
Thanks, Joschi
[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4739 bytes --]
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
next prev parent reply other threads:[~2014-05-02 9:02 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-30 8:56 No sound on Thinkpad T440s in Docking Station Joschi Brauchle
2014-04-30 16:43 ` Takashi Iwai
2014-04-30 17:05 ` Joschi Brauchle
2014-05-02 7:31 ` Takashi Iwai
2014-05-02 8:16 ` Joschi Brauchle
2014-05-02 8:21 ` Takashi Iwai
2014-05-02 9:02 ` Joschi Brauchle [this message]
2014-05-02 9:27 ` Joschi Brauchle
2014-05-02 13:59 ` Joschi Brauchle
2014-05-06 9:46 ` Takashi Iwai
2014-05-06 13:49 ` Joschi Brauchle
2014-05-06 15:20 ` Joschi Brauchle
2014-05-06 15:41 ` Takashi Iwai
2014-05-07 9:28 ` Joschi Brauchle
2014-05-07 9:41 ` Takashi Iwai
2014-05-02 16:09 ` Takashi Iwai
[not found] <32716219.3.1403810435694.JavaMail.jminter@jminter>
2014-06-26 19:23 ` Jim Minter
2014-06-27 10:16 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2014-04-29 15:22 Joschi Brauchle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53635F17.4050202@tum.de \
--to=joschi.brauchle@tum.de \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox