From: David Henningsson <david.henningsson@canonical.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, 1454235@bugs.launchpad.net
Subject: Re: [PATCH] ALSA: hda - Disable Headphone Mic boost for ALC662
Date: Thu, 28 May 2015 09:25:41 +0200 [thread overview]
Message-ID: <5566C2F5.2090705@canonical.com> (raw)
In-Reply-To: <s5h4mmxcgq7.wl-tiwai@suse.de>
On 2015-05-28 09:18, Takashi Iwai wrote:
> At Thu, 28 May 2015 09:15:46 +0200,
> David Henningsson wrote:
>>
>> When headphone mic boost is above zero, some 10 - 20 second delay
>> might occur before the headphone mic is operational.
>> Therefore disable the headphone mic boost control (recording gain is
>> sufficient even without it).
>>
>> (Note: this patch is not about the headset mic, it's about the less
>> common mic-in only mode.)
>>
>> BugLink: https://bugs.launchpad.net/bugs/1454235
>> Suggested-by: Kailang Yang <kailang@realtek.com>
>> Signed-off-by: David Henningsson <david.henningsson@canonical.com>
>> ---
>> sound/pci/hda/patch_realtek.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
>> index d0fa455..87605fc 100644
>> --- a/sound/pci/hda/patch_realtek.c
>> +++ b/sound/pci/hda/patch_realtek.c
>> @@ -4240,6 +4240,10 @@ static void alc_fixup_headset_mode_alc662(struct hda_codec *codec,
>> if (action == HDA_FIXUP_ACT_PRE_PROBE) {
>> spec->parse_flags |= HDA_PINCFG_HEADSET_MIC;
>> spec->gen.hp_mic = 1; /* Mic-in is same pin as headphone */
>> +
>> + /* Disable boost for mic-in permanently */
>> + snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000);
>> + snd_hda_override_wcaps(codec, 0x1b, get_wcaps(codec, 0x1b) & ~AC_WCAP_IN_AMP);
>
> Can we really hard-code NID 0x1b here...?
alc_fixup_headset_mode_alc662 is currently only called from a pin fixup
quirk (via ALC662_FIXUP_DELL_MIC_NO_PRESENCE), and that pin quirk has
headphone at 0x1b, so yes.
It would we better if we could make it more generic, but I think doing
this at HDA_FIXUP_PROBE instead would be too late (the boost control,
paths, etc, would already be created)...?
Do you have a better suggestion?
--
David Henningsson, Canonical Ltd.
https://launchpad.net/~diwic
next prev parent reply other threads:[~2015-05-28 7:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-28 7:15 [PATCH] ALSA: hda - Disable Headphone Mic boost for ALC662 David Henningsson
2015-05-28 7:18 ` Takashi Iwai
2015-05-28 7:25 ` David Henningsson [this message]
2015-05-28 7:30 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2015-05-28 7:40 David Henningsson
2015-05-28 8:07 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5566C2F5.2090705@canonical.com \
--to=david.henningsson@canonical.com \
--cc=1454235@bugs.launchpad.net \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox