* [ALSA - driver 0000334]: EMU10K1, capturing audio is impossible
@ 2004-06-13 21:30 noreply
0 siblings, 0 replies; 6+ messages in thread
From: noreply @ 2004-06-13 21:30 UTC (permalink / raw)
To: alsa-devel
The following bug has been SUBMITTED.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000334
======================================================================
Reported By: netslayer
Assigned To:
======================================================================
Project: ALSA - driver
Bug ID: 334
Category: PCI - emu10k1
Reproducibility: always
Severity: block
Priority: normal
Status: new
Distribution: Gentoo
Kernel Version: 2.6.7rc love-sources
======================================================================
Date Submitted: 06-13-2004 23:30 CEST
Last Modified: 06-13-2004 23:30 CEST
======================================================================
Summary: EMU10K1, capturing audio is impossible
Description:
I have an Audigy (EMU10K2 -- on EMU10K1 drivers). It has worked perfectly
in 0.9.8, and in 1.0.x I can playback audio fine, but capturing seems
impossible.
In 0.9.8 I was able to select a capture source in alsamixer by selecting
it with the space bar. The source had "---" areas above it that meant it
had the capture ability. In 1.0.x that whole functionality is gone, and I
see no more way to capture audio.
I have all my sources up to 100%, and when I plug in an audio to source
into LINE IN on the Audigy, I hear nor can record anything. If I unmute
LINE IN in alsamixer, then I hear pass through audio, which I don't want.
I want to be able to record it, but not hear it through a pass through.
I know several people with this problem, and I myself have a few of these
cards dedicated to MythTV PVR boxes, and this problem makes it impossible
to upgrade ALSA... It's been 6 months since I tried this, and since nobody
reported it, I thought I would.
======================================================================
Bug History
Date Modified Username Field Change
======================================================================
06-13-04 23:30 netslayer New Bug
06-13-04 23:30 netslayer Distribution => Gentoo
06-13-04 23:30 netslayer Kernel Version => 2.6.7rc love-sources
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
>From Windows to Linux, servers to mobile, InstallShield X is the
one installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ALSA - driver 0000334]: EMU10K1, capturing audio is impossible
@ 2004-06-13 23:38 noreply
0 siblings, 0 replies; 6+ messages in thread
From: noreply @ 2004-06-13 23:38 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000334
======================================================================
Reported By: netslayer
Assigned To:
======================================================================
Project: ALSA - driver
Bug ID: 334
Category: PCI - emu10k1
Reproducibility: always
Severity: block
Priority: normal
Status: new
Distribution: Gentoo
Kernel Version: 2.6.7rc love-sources
======================================================================
Date Submitted: 06-13-2004 23:30 CEST
Last Modified: 06-14-2004 01:38 CEST
======================================================================
Summary: EMU10K1, capturing audio is impossible
Description:
I have an Audigy (EMU10K2 -- on EMU10K1 drivers). It has worked perfectly
in 0.9.8, and in 1.0.x I can playback audio fine, but capturing seems
impossible.
In 0.9.8 I was able to select a capture source in alsamixer by selecting
it with the space bar. The source had "---" areas above it that meant it
had the capture ability. In 1.0.x that whole functionality is gone, and I
see no more way to capture audio.
I have all my sources up to 100%, and when I plug in an audio to source
into LINE IN on the Audigy, I hear nor can record anything. If I unmute
LINE IN in alsamixer, then I hear pass through audio, which I don't want.
I want to be able to record it, but not hear it through a pass through.
I know several people with this problem, and I myself have a few of these
cards dedicated to MythTV PVR boxes, and this problem makes it impossible
to upgrade ALSA... It's been 6 months since I tried this, and since nobody
reported it, I thought I would.
======================================================================
----------------------------------------------------------------------
netslayer - 06-14-2004 01:38 CEST
----------------------------------------------------------------------
Just to clarify, I figured out that recording audio off of LINE IN does
work. However, there is no way of recording audio with LINE muted, so as
not to hear the pass through. I want to be able to record, just like in
0.9.8 from the LINE IN, without having to actually listen to the pass
through audio when it is unmuted.
Bug History
Date Modified Username Field Change
======================================================================
06-13-04 23:30 netslayer New Bug
06-13-04 23:30 netslayer Distribution => Gentoo
06-13-04 23:30 netslayer Kernel Version => 2.6.7rc love-sources
06-14-04 01:38 netslayer Bugnote Added: 0001305
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
>From Windows to Linux, servers to mobile, InstallShield X is the
one installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ALSA - driver 0000334]: EMU10K1, capturing audio is impossible
@ 2004-06-14 6:19 noreply
0 siblings, 0 replies; 6+ messages in thread
From: noreply @ 2004-06-14 6:19 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_advanced_page.php?bug_id=0000334
======================================================================
Reported By: netslayer
Assigned To:
======================================================================
Project: ALSA - driver
Bug ID: 334
Category: PCI - emu10k1
Reproducibility: always
Severity: block
Priority: normal
Status: new
Distribution: Gentoo
Kernel Version: 2.6.7rc love-sources
======================================================================
Date Submitted: 06-13-2004 23:30 CEST
Last Modified: 06-14-2004 08:19 CEST
======================================================================
Summary: EMU10K1, capturing audio is impossible
Description:
I have an Audigy (EMU10K2 -- on EMU10K1 drivers). It has worked perfectly
in 0.9.8, and in 1.0.x I can playback audio fine, but capturing seems
impossible.
In 0.9.8 I was able to select a capture source in alsamixer by selecting
it with the space bar. The source had "---" areas above it that meant it
had the capture ability. In 1.0.x that whole functionality is gone, and I
see no more way to capture audio.
I have all my sources up to 100%, and when I plug in an audio to source
into LINE IN on the Audigy, I hear nor can record anything. If I unmute
LINE IN in alsamixer, then I hear pass through audio, which I don't want.
I want to be able to record it, but not hear it through a pass through.
I know several people with this problem, and I myself have a few of these
cards dedicated to MythTV PVR boxes, and this problem makes it impossible
to upgrade ALSA... It's been 6 months since I tried this, and since nobody
reported it, I thought I would.
======================================================================
----------------------------------------------------------------------
netslayer - 06-14-2004 01:38 CEST
----------------------------------------------------------------------
Just to clarify, I figured out that recording audio off of LINE IN does
work. However, there is no way of recording audio with LINE muted, so as
not to hear the pass through. I want to be able to record, just like in
0.9.8 from the LINE IN, without having to actually listen to the pass
through audio when it is unmuted.
----------------------------------------------------------------------
pzad - 06-14-2004 08:19 CEST
----------------------------------------------------------------------
ALSA 0.9.8 uses as ADC AC97, ALSA 1.0.x uses philips ADC (windows drivers
uses philips ADC too and works similiar to alsa 1.0.x).
If you want capture Line In:
-unmute and set Line In volume
-unmute and set volume for Analog Mix Capture Volume
-mute (set volume to 0) for Analog Mix Playback Volume, if don't waqnt to
listen line in while recording.
Bug History
Date Modified Username Field Change
======================================================================
06-13-04 23:30 netslayer New Bug
06-13-04 23:30 netslayer Distribution => Gentoo
06-13-04 23:30 netslayer Kernel Version => 2.6.7rc love-sources
06-14-04 01:38 netslayer Bugnote Added: 0001305
06-14-04 08:19 pzad Bugnote Added: 0001306
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
>From Windows to Linux, servers to mobile, InstallShield X is the
one installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ALSA - driver 0000334]: EMU10K1, capturing audio is impossible
@ 2004-06-28 7:15 noreply
0 siblings, 0 replies; 6+ messages in thread
From: noreply @ 2004-06-28 7:15 UTC (permalink / raw)
To: alsa-devel
The following bug has been ASSIGNED.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_advanced_page.php?bug_id=0000334
======================================================================
Reported By: netslayer
Assigned To: pzad
======================================================================
Project: ALSA - driver
Bug ID: 334
Category: PCI - emu10k1
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Gentoo
Kernel Version: 2.6.7rc love-sources
======================================================================
Date Submitted: 06-13-2004 23:30 CEST
Last Modified: 06-28-2004 09:15 CEST
======================================================================
Summary: EMU10K1, capturing audio is impossible
Description:
I have an Audigy (EMU10K2 -- on EMU10K1 drivers). It has worked perfectly
in 0.9.8, and in 1.0.x I can playback audio fine, but capturing seems
impossible.
In 0.9.8 I was able to select a capture source in alsamixer by selecting
it with the space bar. The source had "---" areas above it that meant it
had the capture ability. In 1.0.x that whole functionality is gone, and I
see no more way to capture audio.
I have all my sources up to 100%, and when I plug in an audio to source
into LINE IN on the Audigy, I hear nor can record anything. If I unmute
LINE IN in alsamixer, then I hear pass through audio, which I don't want.
I want to be able to record it, but not hear it through a pass through.
I know several people with this problem, and I myself have a few of these
cards dedicated to MythTV PVR boxes, and this problem makes it impossible
to upgrade ALSA... It's been 6 months since I tried this, and since nobody
reported it, I thought I would.
======================================================================
----------------------------------------------------------------------
netslayer - 06-14-2004 01:38 CEST
----------------------------------------------------------------------
Just to clarify, I figured out that recording audio off of LINE IN does
work. However, there is no way of recording audio with LINE muted, so as
not to hear the pass through. I want to be able to record, just like in
0.9.8 from the LINE IN, without having to actually listen to the pass
through audio when it is unmuted.
----------------------------------------------------------------------
pzad - 06-14-2004 08:19 CEST
----------------------------------------------------------------------
ALSA 0.9.8 uses as ADC AC97, ALSA 1.0.x uses philips ADC (windows drivers
uses philips ADC too and works similiar to alsa 1.0.x).
If you want capture Line In:
-unmute and set Line In volume
-unmute and set volume for Analog Mix Capture Volume
-mute (set volume to 0) for Analog Mix Playback Volume, if don't waqnt to
listen line in while recording.
Bug History
Date Modified Username Field Change
======================================================================
06-13-04 23:30 netslayer New Bug
06-13-04 23:30 netslayer Distribution => Gentoo
06-13-04 23:30 netslayer Kernel Version => 2.6.7rc love-sources
06-14-04 01:38 netslayer Bugnote Added: 0001305
06-14-04 08:19 pzad Bugnote Added: 0001306
06-28-04 09:15 pzad Status new => assigned
06-28-04 09:15 pzad Assigned To => pzad
======================================================================
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ALSA - driver 0000334]: EMU10K1, capturing audio is impossible
@ 2004-08-30 10:04 bugtrack
0 siblings, 0 replies; 6+ messages in thread
From: bugtrack @ 2004-08-30 10:04 UTC (permalink / raw)
To: alsa-devel
The following bug has been RESOLVED.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_advanced_page.php?bug_id=0000334
======================================================================
Reported By: netslayer
Assigned To: pzad
======================================================================
Project: ALSA - driver
Bug ID: 334
Category: PCI - emu10k1
Reproducibility: always
Severity: block
Priority: normal
Status: resolved
Distribution: Gentoo
Kernel Version: 2.6.7rc love-sources
Resolution: not a bug
======================================================================
Date Submitted: 06-13-2004 23:30 CEST
Last Modified: 08-30-2004 12:04 CEST
======================================================================
Summary: EMU10K1, capturing audio is impossible
Description:
I have an Audigy (EMU10K2 -- on EMU10K1 drivers). It has worked perfectly
in 0.9.8, and in 1.0.x I can playback audio fine, but capturing seems
impossible.
In 0.9.8 I was able to select a capture source in alsamixer by selecting
it with the space bar. The source had "---" areas above it that meant it
had the capture ability. In 1.0.x that whole functionality is gone, and I
see no more way to capture audio.
I have all my sources up to 100%, and when I plug in an audio to source
into LINE IN on the Audigy, I hear nor can record anything. If I unmute
LINE IN in alsamixer, then I hear pass through audio, which I don't want.
I want to be able to record it, but not hear it through a pass through.
I know several people with this problem, and I myself have a few of these
cards dedicated to MythTV PVR boxes, and this problem makes it impossible
to upgrade ALSA... It's been 6 months since I tried this, and since nobody
reported it, I thought I would.
======================================================================
----------------------------------------------------------------------
netslayer - 06-14-2004 01:38 CEST
----------------------------------------------------------------------
Just to clarify, I figured out that recording audio off of LINE IN does
work. However, there is no way of recording audio with LINE muted, so as
not to hear the pass through. I want to be able to record, just like in
0.9.8 from the LINE IN, without having to actually listen to the pass
through audio when it is unmuted.
----------------------------------------------------------------------
pzad - 06-14-2004 08:19 CEST
----------------------------------------------------------------------
ALSA 0.9.8 uses as ADC AC97, ALSA 1.0.x uses philips ADC (windows drivers
uses philips ADC too and works similiar to alsa 1.0.x).
If you want capture Line In:
-unmute and set Line In volume
-unmute and set volume for Analog Mix Capture Volume
-mute (set volume to 0) for Analog Mix Playback Volume, if don't waqnt to
listen line in while recording.
----------------------------------------------------------------------
pzad - 08-06-2004 15:01 CEST
----------------------------------------------------------------------
Helped this ???
----------------------------------------------------------------------
pzad - 08-30-2004 12:04 CEST
----------------------------------------------------------------------
Not response for 2 weeks.
Bug History
Date Modified Username Field Change
======================================================================
06-13-04 23:30 netslayer New Bug
06-13-04 23:30 netslayer Distribution => Gentoo
06-13-04 23:30 netslayer Kernel Version => 2.6.7rc love-sources
06-14-04 01:38 netslayer Bugnote Added: 0001305
06-14-04 08:19 pzad Bugnote Added: 0001306
06-28-04 09:15 pzad Status new => assigned
06-28-04 09:15 pzad Assigned To => pzad
08-06-04 15:01 pzad Bugnote Added: 0001540
08-06-04 15:02 pzad Description Updated
08-06-04 15:02 pzad Steps to Reproduce Updated
08-06-04 15:02 pzad Additional Information Updated
08-06-04 15:02 pzad Status assigned => feedback
08-30-04 12:04 pzad Bugnote Added: 0001667
08-30-04 12:04 pzad Resolution open => not a bug
08-30-04 12:04 pzad Status feedback => resolved
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=5047&alloc_id=10808&op=click
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ALSA - driver 0000334]: EMU10K1, capturing audio is impossible
@ 2004-11-09 15:13 bugtrack
0 siblings, 0 replies; 6+ messages in thread
From: bugtrack @ 2004-11-09 15:13 UTC (permalink / raw)
To: alsa-devel
The following issue has been CLOSED
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=334>
======================================================================
Reported By: netslayer
Assigned To: pzad
======================================================================
Project: ALSA - driver
Issue ID: 334
Category: PCI - emu10k1
Reproducibility: always
Severity: block
Priority: normal
Status: closed
Distribution: Gentoo
Kernel Version: 2.6.7rc love-sources
Resolution: not an issue
Fixed in Version:
======================================================================
Date Submitted: 06-13-2004 23:30 CEST
Last Modified: 11-09-2004 16:13 CET
======================================================================
Summary: EMU10K1, capturing audio is impossible
Description:
I have an Audigy (EMU10K2 -- on EMU10K1 drivers). It has worked perfectly
in 0.9.8, and in 1.0.x I can playback audio fine, but capturing seems
impossible.
In 0.9.8 I was able to select a capture source in alsamixer by selecting
it with the space bar. The source had "---" areas above it that meant it
had the capture ability. In 1.0.x that whole functionality is gone, and I
see no more way to capture audio.
I have all my sources up to 100%, and when I plug in an audio to source
into LINE IN on the Audigy, I hear nor can record anything. If I unmute
LINE IN in alsamixer, then I hear pass through audio, which I don't want.
I want to be able to record it, but not hear it through a pass through.
I know several people with this problem, and I myself have a few of these
cards dedicated to MythTV PVR boxes, and this problem makes it impossible
to upgrade ALSA... It's been 6 months since I tried this, and since nobody
reported it, I thought I would.
======================================================================
----------------------------------------------------------------------
pzad - 08-30-04 12:04
----------------------------------------------------------------------
Not response for 2 weeks.
----------------------------------------------------------------------
tiwai - 11-09-04 16:13
----------------------------------------------------------------------
No response from reporter.
Issue History
Date Modified Username Field Change
======================================================================
06-13-04 23:30 netslayer New Issue
06-13-04 23:30 netslayer Distribution => Gentoo
06-13-04 23:30 netslayer Kernel Version => 2.6.7rc love-sources
06-14-04 01:38 netslayer Note Added: 0001305
06-14-04 08:19 pzad Note Added: 0001306
06-28-04 09:15 pzad Status new => assigned
06-28-04 09:15 pzad Assigned To => pzad
08-06-04 15:01 pzad Note Added: 0001540
08-06-04 15:02 pzad Status assigned => feedback
08-06-04 15:02 pzad Description Updated
08-06-04 15:02 pzad Steps to Reproduce Updated
08-06-04 15:02 pzad Additional Information Updated
08-30-04 12:04 pzad Status feedback => resolved
08-30-04 12:04 pzad Resolution open => not an issue
08-30-04 12:04 pzad Note Added: 0001667
11-09-04 16:13 tiwai Status resolved => closed
11-09-04 16:13 tiwai Note Added: 0002327
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-11-09 15:13 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-13 21:30 [ALSA - driver 0000334]: EMU10K1, capturing audio is impossible noreply
-- strict thread matches above, loose matches on Subject: below --
2004-06-13 23:38 noreply
2004-06-14 6:19 noreply
2004-06-28 7:15 noreply
2004-08-30 10:04 bugtrack
2004-11-09 15:13 bugtrack
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox