* [ALSA - driver 0001649]: No surround sound on ICH5 (AC'97 AD1980)
@ 2005-12-14 6:46 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-12-14 6:46 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1649>
======================================================================
Reported By: znerd
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1649
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Gentoo Linux
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-14-2005 02:37 CET
Last Modified: 12-14-2005 07:46 CET
======================================================================
Summary: No surround sound on ICH5 (AC'97 AD1980)
Description:
I cannot get my AC'97 device (AD1980) to produce any sound other than
stereo output. I have tried various settings on alsamixer and I used
various speaker-test forms to validate settings. When I use:
speaker-test -Dplug:surround40 -c4
then I hear just Front-Left and Front-Right. There is total silence on the
rear channels. I plugged the rear speakers plug into the 2nd sound output
jack.
Some hints would be appreciated. I have been searching around the internet
and have found other issues regarding the AD1980, but not this one. I do
realize it may be my setup that's wrong, but the chance is getting quite
small by now.
======================================================================
----------------------------------------------------------------------
znerd - 12-14-05 02:41
----------------------------------------------------------------------
Here's the output of lspci -nv:
00:00.0 0600: 8086:2578 (rev 02)
Subsystem: 1028:0156
Flags: bus master, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [e4] Vendor Specific Information
Capabilities: [a0] AGP version 3.0
00:01.0 0604: 8086:2579 (rev 02)
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: fd000000-feafffff
Prefetchable memory behind bridge: d8000000-efffffff
00:1d.0 0c03: 8086:24d2 (rev 02)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ff80 [size=32]
00:1d.1 0c03: 8086:24d4 (rev 02)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at ff60 [size=32]
00:1d.2 0c03: 8086:24d7 (rev 02)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ff40 [size=32]
00:1d.3 0c03: 8086:24de (rev 02)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ff20 [size=32]
00:1d.7 0c03: 8086:24dd (rev 02) (prog-if 20)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 0604: 8086:244e (rev c2)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fce00000-fcffffff
Prefetchable memory behind bridge: 50000000-500fffff
00:1f.0 0601: 8086:24d0 (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 0101: 8086:24db (rev 02) (prog-if 8a)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at ffa0 [size=16]
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
00:1f.2 0101: 8086:24d1 (rev 02) (prog-if 8f)
Subsystem: 1028:0156
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 16
I/O ports at fe00 [size=8]
I/O ports at fe10 [size=4]
I/O ports at fe20 [size=8]
I/O ports at fe30 [size=4]
I/O ports at fea0 [size=16]
00:1f.3 0c05: 8086:24d3 (rev 02)
Subsystem: 1028:0156
Flags: medium devsel, IRQ 10
I/O ports at eda0 [size=32]
00:1f.5 0401: 8086:24d5 (rev 02)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at ee00 [size=256]
I/O ports at edc0 [size=64]
Memory at febffa00 (32-bit, non-prefetchable) [size=512]
Memory at febff900 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
01:00.0 0300: 10de:0326 (rev a1)
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 19
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
[virtual] Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
02:02.0 0100: 9005:0010
Subsystem: 9005:a180
Flags: bus master, medium devsel, latency 64, IRQ 17
BIST result: 00
I/O ports at de00 [disabled] [size=256]
Memory at fcedf000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
02:0c.0 0200: 8086:100e (rev 02)
Subsystem: 1028:0156
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at fcee0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at ddc0 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
----------------------------------------------------------------------
lmike - 12-14-05 07:46
----------------------------------------------------------------------
A bit strange the i/o and memory resources settings in the pci output. Do
you have set PnP OS to 'Yes' in BIOS settings ? If yes, try to set it to
'No'.
Issue History
Date Modified Username Field Change
======================================================================
12-14-05 02:37 znerd New Issue
12-14-05 02:37 znerd Distribution => Gentoo Linux
12-14-05 02:37 znerd Kernel Version => 2.6.14
12-14-05 02:41 znerd Note Added: 0007026
12-14-05 07:46 lmike Note Added: 0007029
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread* [ALSA - driver 0001649]: No surround sound on ICH5 (AC'97 AD1980)
@ 2006-01-07 18:26 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2006-01-07 18:26 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1649>
======================================================================
Reported By: znerd
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1649
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Gentoo Linux
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-14-2005 02:37 CET
Last Modified: 01-07-2006 19:26 CET
======================================================================
Summary: No surround sound on ICH5 (AC'97 AD1980)
Description:
I cannot get my AC'97 device (AD1980) to produce any sound other than
stereo output. I have tried various settings on alsamixer and I used
various speaker-test forms to validate settings. When I use:
speaker-test -Dplug:surround40 -c4
then I hear just Front-Left and Front-Right. There is total silence on the
rear channels. I plugged the rear speakers plug into the 2nd sound output
jack.
Some hints would be appreciated. I have been searching around the internet
and have found other issues regarding the AD1980, but not this one. I do
realize it may be my setup that's wrong, but the chance is getting quite
small by now.
======================================================================
----------------------------------------------------------------------
znerd - 01-07-06 14:51
----------------------------------------------------------------------
Anything I can/should do to get further?
----------------------------------------------------------------------
rlrevell - 01-07-06 19:26
----------------------------------------------------------------------
Hmm, if you can't get surround sound on Windows, what makes you think it's
possible with your hardware?
Issue History
Date Modified Username Field Change
======================================================================
12-14-05 02:37 znerd New Issue
12-14-05 02:37 znerd Distribution => Gentoo Linux
12-14-05 02:37 znerd Kernel Version => 2.6.14
12-14-05 02:41 znerd Note Added: 0007026
12-14-05 07:46 lmike Note Added: 0007029
12-14-05 08:46 znerd Note Added: 0007030
12-24-05 16:33 znerd Note Added: 0007142
01-07-06 14:51 znerd Note Added: 0007513
01-07-06 19:26 rlrevell Note Added: 0007518
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0001649]: No surround sound on ICH5 (AC'97 AD1980)
@ 2006-01-07 13:51 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2006-01-07 13:51 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1649>
======================================================================
Reported By: znerd
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1649
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Gentoo Linux
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-14-2005 02:37 CET
Last Modified: 01-07-2006 14:51 CET
======================================================================
Summary: No surround sound on ICH5 (AC'97 AD1980)
Description:
I cannot get my AC'97 device (AD1980) to produce any sound other than
stereo output. I have tried various settings on alsamixer and I used
various speaker-test forms to validate settings. When I use:
speaker-test -Dplug:surround40 -c4
then I hear just Front-Left and Front-Right. There is total silence on the
rear channels. I plugged the rear speakers plug into the 2nd sound output
jack.
Some hints would be appreciated. I have been searching around the internet
and have found other issues regarding the AD1980, but not this one. I do
realize it may be my setup that's wrong, but the chance is getting quite
small by now.
======================================================================
----------------------------------------------------------------------
znerd - 12-24-05 16:33
----------------------------------------------------------------------
I do not even have a 'PNP OS' setting. So what's the next step? Do I need
to provide any additional feedback? Note that I installed Windows XP (SP2)
this week, but I could not see how to enable surround sound there. I could
indicate I have Quadrofonic speakers, but I'm not sure whether that should
work.
----------------------------------------------------------------------
znerd - 01-07-06 14:51
----------------------------------------------------------------------
Anything I can/should do to get further?
Issue History
Date Modified Username Field Change
======================================================================
12-14-05 02:37 znerd New Issue
12-14-05 02:37 znerd Distribution => Gentoo Linux
12-14-05 02:37 znerd Kernel Version => 2.6.14
12-14-05 02:41 znerd Note Added: 0007026
12-14-05 07:46 lmike Note Added: 0007029
12-14-05 08:46 znerd Note Added: 0007030
12-24-05 16:33 znerd Note Added: 0007142
01-07-06 14:51 znerd Note Added: 0007513
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0001649]: No surround sound on ICH5 (AC'97 AD1980)
@ 2005-12-24 15:33 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-12-24 15:33 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1649>
======================================================================
Reported By: znerd
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1649
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Gentoo Linux
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-14-2005 02:37 CET
Last Modified: 12-24-2005 16:33 CET
======================================================================
Summary: No surround sound on ICH5 (AC'97 AD1980)
Description:
I cannot get my AC'97 device (AD1980) to produce any sound other than
stereo output. I have tried various settings on alsamixer and I used
various speaker-test forms to validate settings. When I use:
speaker-test -Dplug:surround40 -c4
then I hear just Front-Left and Front-Right. There is total silence on the
rear channels. I plugged the rear speakers plug into the 2nd sound output
jack.
Some hints would be appreciated. I have been searching around the internet
and have found other issues regarding the AD1980, but not this one. I do
realize it may be my setup that's wrong, but the chance is getting quite
small by now.
======================================================================
----------------------------------------------------------------------
znerd - 12-14-05 08:46
----------------------------------------------------------------------
I'm not sure whether I set or unset 'PNP OS'. I'll have a look at the BIOS
settings when I come home.
----------------------------------------------------------------------
znerd - 12-24-05 16:33
----------------------------------------------------------------------
I do not even have a 'PNP OS' setting. So what's the next step? Do I need
to provide any additional feedback? Note that I installed Windows XP (SP2)
this week, but I could not see how to enable surround sound there. I could
indicate I have Quadrofonic speakers, but I'm not sure whether that should
work.
Issue History
Date Modified Username Field Change
======================================================================
12-14-05 02:37 znerd New Issue
12-14-05 02:37 znerd Distribution => Gentoo Linux
12-14-05 02:37 znerd Kernel Version => 2.6.14
12-14-05 02:41 znerd Note Added: 0007026
12-14-05 07:46 lmike Note Added: 0007029
12-14-05 08:46 znerd Note Added: 0007030
12-24-05 16:33 znerd Note Added: 0007142
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0001649]: No surround sound on ICH5 (AC'97 AD1980)
@ 2005-12-14 7:46 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-12-14 7:46 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1649>
======================================================================
Reported By: znerd
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1649
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Gentoo Linux
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-14-2005 02:37 CET
Last Modified: 12-14-2005 08:46 CET
======================================================================
Summary: No surround sound on ICH5 (AC'97 AD1980)
Description:
I cannot get my AC'97 device (AD1980) to produce any sound other than
stereo output. I have tried various settings on alsamixer and I used
various speaker-test forms to validate settings. When I use:
speaker-test -Dplug:surround40 -c4
then I hear just Front-Left and Front-Right. There is total silence on the
rear channels. I plugged the rear speakers plug into the 2nd sound output
jack.
Some hints would be appreciated. I have been searching around the internet
and have found other issues regarding the AD1980, but not this one. I do
realize it may be my setup that's wrong, but the chance is getting quite
small by now.
======================================================================
----------------------------------------------------------------------
lmike - 12-14-05 07:46
----------------------------------------------------------------------
A bit strange the i/o and memory resources settings in the pci output. Do
you have set PnP OS to 'Yes' in BIOS settings ? If yes, try to set it to
'No'.
----------------------------------------------------------------------
znerd - 12-14-05 08:46
----------------------------------------------------------------------
I'm not sure whether I set or unset 'PNP OS'. I'll have a look at the BIOS
settings when I come home.
Issue History
Date Modified Username Field Change
======================================================================
12-14-05 02:37 znerd New Issue
12-14-05 02:37 znerd Distribution => Gentoo Linux
12-14-05 02:37 znerd Kernel Version => 2.6.14
12-14-05 02:41 znerd Note Added: 0007026
12-14-05 07:46 lmike Note Added: 0007029
12-14-05 08:46 znerd Note Added: 0007030
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0001649]: No surround sound on ICH5 (AC'97 AD1980)
@ 2005-12-14 1:41 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-12-14 1:41 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1649>
======================================================================
Reported By: znerd
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1649
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Gentoo Linux
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-14-2005 02:37 CET
Last Modified: 12-14-2005 02:41 CET
======================================================================
Summary: No surround sound on ICH5 (AC'97 AD1980)
Description:
I cannot get my AC'97 device (AD1980) to produce any sound other than
stereo output. I have tried various settings on alsamixer and I used
various speaker-test forms to validate settings. When I use:
speaker-test -Dplug:surround40 -c4
then I hear just Front-Left and Front-Right. There is total silence on the
rear channels. I plugged the rear speakers plug into the 2nd sound output
jack.
Some hints would be appreciated. I have been searching around the internet
and have found other issues regarding the AD1980, but not this one. I do
realize it may be my setup that's wrong, but the chance is getting quite
small by now.
======================================================================
----------------------------------------------------------------------
znerd - 12-14-05 02:41
----------------------------------------------------------------------
Here's the output of lspci -nv:
00:00.0 0600: 8086:2578 (rev 02)
Subsystem: 1028:0156
Flags: bus master, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [e4] Vendor Specific Information
Capabilities: [a0] AGP version 3.0
00:01.0 0604: 8086:2579 (rev 02)
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: fd000000-feafffff
Prefetchable memory behind bridge: d8000000-efffffff
00:1d.0 0c03: 8086:24d2 (rev 02)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ff80 [size=32]
00:1d.1 0c03: 8086:24d4 (rev 02)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at ff60 [size=32]
00:1d.2 0c03: 8086:24d7 (rev 02)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ff40 [size=32]
00:1d.3 0c03: 8086:24de (rev 02)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ff20 [size=32]
00:1d.7 0c03: 8086:24dd (rev 02) (prog-if 20)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 0604: 8086:244e (rev c2)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fce00000-fcffffff
Prefetchable memory behind bridge: 50000000-500fffff
00:1f.0 0601: 8086:24d0 (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 0101: 8086:24db (rev 02) (prog-if 8a)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at ffa0 [size=16]
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
00:1f.2 0101: 8086:24d1 (rev 02) (prog-if 8f)
Subsystem: 1028:0156
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 16
I/O ports at fe00 [size=8]
I/O ports at fe10 [size=4]
I/O ports at fe20 [size=8]
I/O ports at fe30 [size=4]
I/O ports at fea0 [size=16]
00:1f.3 0c05: 8086:24d3 (rev 02)
Subsystem: 1028:0156
Flags: medium devsel, IRQ 10
I/O ports at eda0 [size=32]
00:1f.5 0401: 8086:24d5 (rev 02)
Subsystem: 1028:0156
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at ee00 [size=256]
I/O ports at edc0 [size=64]
Memory at febffa00 (32-bit, non-prefetchable) [size=512]
Memory at febff900 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
01:00.0 0300: 10de:0326 (rev a1)
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 19
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
[virtual] Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
02:02.0 0100: 9005:0010
Subsystem: 9005:a180
Flags: bus master, medium devsel, latency 64, IRQ 17
BIST result: 00
I/O ports at de00 [disabled] [size=256]
Memory at fcedf000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
02:0c.0 0200: 8086:100e (rev 02)
Subsystem: 1028:0156
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at fcee0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at ddc0 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Issue History
Date Modified Username Field Change
======================================================================
12-14-05 02:37 znerd New Issue
12-14-05 02:37 znerd Distribution => Gentoo Linux
12-14-05 02:37 znerd Kernel Version => 2.6.14
12-14-05 02:41 znerd Note Added: 0007026
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread* [ALSA - driver 0001649]: No surround sound on ICH5 (AC'97 AD1980)
@ 2005-12-14 1:37 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-12-14 1:37 UTC (permalink / raw)
To: alsa-devel
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1649>
======================================================================
Reported By: znerd
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1649
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Gentoo Linux
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-14-2005 02:37 CET
Last Modified: 12-14-2005 02:37 CET
======================================================================
Summary: No surround sound on ICH5 (AC'97 AD1980)
Description:
I cannot get my AC'97 device (AD1980) to produce any sound other than
stereo output. I have tried various settings on alsamixer and I used
various speaker-test forms to validate settings. When I use:
speaker-test -Dplug:surround40 -c4
then I hear just Front-Left and Front-Right. There is total silence on the
rear channels. I plugged the rear speakers plug into the 2nd sound output
jack.
Some hints would be appreciated. I have been searching around the internet
and have found other issues regarding the AD1980, but not this one. I do
realize it may be my setup that's wrong, but the chance is getting quite
small by now.
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
12-14-05 02:37 znerd New Issue
12-14-05 02:37 znerd Distribution => Gentoo Linux
12-14-05 02:37 znerd Kernel Version => 2.6.14
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2006-01-07 18:26 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-12-14 6:46 [ALSA - driver 0001649]: No surround sound on ICH5 (AC'97 AD1980) bugtrack
-- strict thread matches above, loose matches on Subject: below --
2006-01-07 18:26 bugtrack
2006-01-07 13:51 bugtrack
2005-12-24 15:33 bugtrack
2005-12-14 7:46 bugtrack
2005-12-14 1:41 bugtrack
2005-12-14 1:37 bugtrack
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox