From: Takashi Iwai <tiwai@suse.de>
To: perex@perex.cz
Cc: Mark Brown <broonie@kernel.org>,
postmaster@alsa-project.org,
sound-open-firmware-owner@alsa-project.org,
alsa-devel@alsa-project.org,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
sound-open-firmware@alsa-project.org
Subject: Re: [alsa-devel@alsa-project.org: [PATCH 3/5] ASoC: mediatek: mt8195-afe-pcm: Simplify runtime PM during probe]
Date: Thu, 04 May 2023 09:35:38 +0200 [thread overview]
Message-ID: <87o7n0mtv9.wl-tiwai@suse.de> (raw)
In-Reply-To: <ZFMF2cD3nPgpZOpa@finisterre.sirena.org.uk>
On Thu, 04 May 2023 03:09:45 +0200,
Mark Brown wrote:
>
> Hi,
>
> Here's another mail (one of several in this series) that got completely
> mangled by the alsa-project.org mailman to the point of unusability. I
> didn't see any response to my last mail about this, is there any news on
> fixing mailman to not do this? It's extremely disruptive to working
> with lore.
It seems that alsa-project.org mailman re-sends the post with
xxx@alsa-project.org address sometimes, indeed. I don't know the
condition, but now I noticed it while checking the pending approvals.
Those that appeared in the list wrongly were likely the posts I
approved without knowing them being superfluously resent ones.
Jaroslav, could you check your mailman configuration?
thanks,
Takashi
> Thanks,
> Mark
> Subject: [PATCH 3/5] ASoC: mediatek: mt8195-afe-pcm: Simplify runtime PM during probe
> From: AngeloGioacchino Del Regno via Alsa-devel <alsa-devel@alsa-project.org>
> Date: Wed, 03 May 2023 13:34:11 +0200
> Message-Id: <168311377075.26.14919941665402646886@mailman-core.alsa-project.org>
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
>
> Use devm_pm_runtime_enable() and pm_runtime_resume_and_get() to
> to simplify the probe function.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
> sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 22 ++++++++++++----------
> 1 file changed, 12 insertions(+), 10 deletions(-)
>
> diff --git a/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c b/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
> index 9e45efeada55..a54c16e0aa05 100644
> --- a/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
> +++ b/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
> @@ -3179,16 +3179,16 @@ static int mt8195_afe_pcm_dev_probe(struct platform_device *pdev)
>
> mt8195_afe_parse_of(afe, pdev->dev.of_node);
>
> - pm_runtime_enable(dev);
> - if (!pm_runtime_enabled(dev)) {
> - ret = mt8195_afe_runtime_resume(dev);
> - if (ret)
> - return ret;
> - }
> -
> /* enable clock for regcache get default value from hw */
> afe_priv->pm_runtime_bypass_reg_ctl = true;
> - pm_runtime_get_sync(dev);
> +
> + ret = devm_pm_runtime_enable(dev);
> + if (ret)
> + return ret;
> +
> + ret = pm_runtime_resume_and_get(dev);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to resume device\n");
>
> afe->regmap = devm_regmap_init_mmio(&pdev->dev, afe->base_addr,
> &mt8195_afe_regmap_config);
> @@ -3238,7 +3238,10 @@ static int mt8195_afe_pcm_dev_probe(struct platform_device *pdev)
>
> mt8195_afe_init_registers(afe);
>
> - pm_runtime_put_sync(dev);
> + ret = pm_runtime_put_sync(dev);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to suspend device\n");
> +
> afe_priv->pm_runtime_bypass_reg_ctl = false;
>
> regcache_cache_only(afe->regmap, true);
> @@ -3248,7 +3251,6 @@ static int mt8195_afe_pcm_dev_probe(struct platform_device *pdev)
>
> err_pm_put:
> pm_runtime_put_sync(dev);
> - pm_runtime_disable(dev);
>
> return ret;
> }
> --
> 2.40.1
next prev parent reply other threads:[~2023-05-04 7:37 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-04 1:09 [alsa-devel@alsa-project.org: [PATCH 3/5] ASoC: mediatek: mt8195-afe-pcm: Simplify runtime PM during probe] Mark Brown
2023-05-04 7:35 ` Takashi Iwai [this message]
2023-05-04 7:58 ` Takashi Iwai
2023-05-08 7:52 ` Takashi Iwai
2023-05-09 7:12 ` DMARC (Was: Re: [alsa-devel@alsa-project.org: [PATCH 3/5] ASoC: mediatek: mt8195-afe-pcm: Simplify runtime PM during probe]) Jaroslav Kysela
2023-05-09 9:37 ` Mark Brown
2023-05-09 9:54 ` Jaroslav Kysela
2023-05-09 14:35 ` Mark Brown
2023-05-09 18:03 ` Jaroslav Kysela
2023-05-09 18:26 ` Konstantin Ryabitsev
2023-05-10 2:05 ` Mark Brown
2023-05-10 3:33 ` Chen-Yu Tsai
2023-05-10 3:58 ` Geraldo Nascimento
2023-05-10 6:17 ` Jaroslav Kysela
2023-05-10 15:13 ` Konstantin Ryabitsev
2023-05-10 17:15 ` Geraldo Nascimento
2023-05-09 18:22 ` Konstantin Ryabitsev
2023-05-10 7:50 ` Jaroslav Kysela
2023-05-10 15:34 ` Konstantin Ryabitsev
2023-05-10 16:19 ` Jaroslav Kysela
2023-05-10 16:43 ` Konstantin Ryabitsev
2023-05-10 18:38 ` Jaroslav Kysela
2023-05-11 5:58 ` Mark Brown
2023-05-09 17:51 ` Geraldo Nascimento
2023-05-10 3:01 ` Chen-Yu Tsai
2023-05-10 6:46 ` Jaroslav Kysela
2023-05-05 20:38 ` [alsa-devel@alsa-project.org: [PATCH 3/5] ASoC: mediatek: mt8195-afe-pcm: Simplify runtime PM during probe] Geraldo Nascimento
2023-05-06 0:13 ` Mark Brown
2023-05-06 2:17 ` Geraldo Nascimento
2023-05-07 23:33 ` Mark Brown
2023-05-07 23:38 ` Geraldo Nascimento
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87o7n0mtv9.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=broonie@kernel.org \
--cc=perex@perex.cz \
--cc=postmaster@alsa-project.org \
--cc=sound-open-firmware-owner@alsa-project.org \
--cc=sound-open-firmware@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox