Re: [

[Takashi Iwai <tiwai@suse.de>]

On Thu, 04 May 2023 09:58:44 +0200,
Takashi Iwai wrote:
> 
> On Thu, 04 May 2023 09:35:38 +0200,
> Takashi Iwai wrote:
> > 
> > On Thu, 04 May 2023 03:09:45 +0200,
> > Mark Brown wrote:
> > > 
> > > Hi,
> > > 
> > > Here's another mail (one of several in this series) that got completely
> > > mangled by the alsa-project.org mailman to the point of unusability.  I
> > > didn't see any response to my last mail about this, is there any news on
> > > fixing mailman to not do this?  It's extremely disruptive to working
> > > with lore.
> > 
> > It seems that alsa-project.org mailman re-sends the post with
> > xxx@alsa-project.org address sometimes, indeed.  I don't know the
> > condition, but now I noticed it while checking the pending approvals.
> 
> And, I guess it happens when a post comes from a non-subscriber.
> (But not sure whether this happens always...)
> It waits for approval, but also mangles the sender address and co.
> This behavior is new after the mail server update.

Jaroslav, could you investigate it?  I checked again, and it seems
that all "approved" posts from non-subscribers are modified to the
sender addresses with alsa-project.org.  I guess there must be some
option to prevent it.


Takashi

> > Those that appeared in the list wrongly were likely the posts I
> > approved without knowing them being superfluously resent ones.
> > 
> > Jaroslav, could you check your mailman configuration?
> 
> So, please check the configuration.  As of now, the post from
> non-subscriber becomes confusing and unusable for b4.
> 
> 
> thanks,
> 
> Takashi
> 
> > 
> > 
> > thanks,
> > 
> > Takashi
> > 
> > > Thanks,
> > > Mark
> > > Subject: [PATCH 3/5] ASoC: mediatek: mt8195-afe-pcm: Simplify runtime PM during probe
> > > From: AngeloGioacchino Del Regno via Alsa-devel <alsa-devel@alsa-project.org>
> > > Date: Wed, 03 May 2023 13:34:11 +0200
> > > Message-Id: <168311377075.26.14919941665402646886@mailman-core.alsa-project.org>
> > > MIME-Version: 1.0
> > > Content-Transfer-Encoding: 7bit
> > > 
> > > Use devm_pm_runtime_enable() and pm_runtime_resume_and_get() to
> > > to simplify the probe function.
> > > 
> > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> > > ---
> > >  sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 22 ++++++++++++----------
> > >  1 file changed, 12 insertions(+), 10 deletions(-)
> > > 
> > > diff --git a/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c b/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
> > > index 9e45efeada55..a54c16e0aa05 100644
> > > --- a/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
> > > +++ b/sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
> > > @@ -3179,16 +3179,16 @@ static int mt8195_afe_pcm_dev_probe(struct platform_device *pdev)
> > >  
> > >  	mt8195_afe_parse_of(afe, pdev->dev.of_node);
> > >  
> > > -	pm_runtime_enable(dev);
> > > -	if (!pm_runtime_enabled(dev)) {
> > > -		ret = mt8195_afe_runtime_resume(dev);
> > > -		if (ret)
> > > -			return ret;
> > > -	}
> > > -
> > >  	/* enable clock for regcache get default value from hw */
> > >  	afe_priv->pm_runtime_bypass_reg_ctl = true;
> > > -	pm_runtime_get_sync(dev);
> > > +
> > > +	ret = devm_pm_runtime_enable(dev);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	ret = pm_runtime_resume_and_get(dev);
> > > +	if (ret)
> > > +		return dev_err_probe(dev, ret, "Failed to resume device\n");
> > >  
> > >  	afe->regmap = devm_regmap_init_mmio(&pdev->dev, afe->base_addr,
> > >  					    &mt8195_afe_regmap_config);
> > > @@ -3238,7 +3238,10 @@ static int mt8195_afe_pcm_dev_probe(struct platform_device *pdev)
> > >  
> > >  	mt8195_afe_init_registers(afe);
> > >  
> > > -	pm_runtime_put_sync(dev);
> > > +	ret = pm_runtime_put_sync(dev);
> > > +	if (ret)
> > > +		return dev_err_probe(dev, ret, "Failed to suspend device\n");
> > > +
> > >  	afe_priv->pm_runtime_bypass_reg_ctl = false;
> > >  
> > >  	regcache_cache_only(afe->regmap, true);
> > > @@ -3248,7 +3251,6 @@ static int mt8195_afe_pcm_dev_probe(struct platform_device *pdev)
> > >  
> > >  err_pm_put:
> > >  	pm_runtime_put_sync(dev);
> > > -	pm_runtime_disable(dev);
> > >  
> > >  	return ret;
> > >  }
> > > -- 
> > > 2.40.1