Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000669]: Creative SB Live! 24-bit External (USB) works only at a minimal level.
Date: Mon, 23 May 2005 12:37:09 +0200	[thread overview]
Message-ID: <947504005d99a3a9c382330cb295bc08@bugtrack.alsa-project.org> (raw)


A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=669> 
======================================================================
Reported By:                Henni
Assigned To:                Clemens Ladisch
======================================================================
Project:                    ALSA - driver
Issue ID:                   669
Category:                   USB - usb-audio
Reproducibility:            always
Severity:                   feature
Priority:                   normal
Status:                     assigned
Distribution:               Gentoo 2004.3
Kernel Version:             2.6.9-cko3
======================================================================
Date Submitted:             11-23-2004 19:23 CET
Last Modified:              05-23-2005 12:37 CEST
======================================================================
Summary:                    Creative SB Live! 24-bit External (USB) works only
at a minimal level.
Description: 
The Creative SB Live! 24-bit External is a "card" similar to the Audigy 2
NX (probably its litte brother).

With the snd-usb-audio the ''only'' thing working is the stereo output. I
read that the Audigy 2 NX works far better with the snd-usb-audio.
Probably there is a way to get the SB Live! 24-bit on a similar lvl?

PS: I added some informations about it as an attachment.

======================================================================

----------------------------------------------------------------------
 kempokaraterulz - 01-09-05 02:04 
----------------------------------------------------------------------
I have the same results  as the original reporter, except i notice randomly
my sound dies and i have to pause / unpause whatever i was playing music
in in order to get the sound to come out again. This may not be alsa's
fault since i find that  my usb webcam randomly dies when attached to my
laptop as well. 

Here is some additional info about the unit itself,
FRONT: 
Two LED's: 1 power (if  driver is loaded it is lit) 1 'CMSS' light ... ive
never seen it lit
A 'CMSS' button, pressing it appears to have no effect, no messages are
logged in any of my logs either
An IRDA port, doesnt seem to be detected in any way on the computer
A head phone jack: Works
A microphone jack: Untested
An optical output: Works in 2 channel mode
TOP:
An analog Mic level wheel (untested)
A click wheel type deal thats for controlling volume: Non functional
Pushing in the volume click wheel is supposed to mute / unmute, but it
only mutes and the only way to unmute is to unload the driver and reload
the driver
BACK:
C/Sub port: Untested
Rear Port: Untested
Front Port: Untested
Line in port: Untested
SPDIF Out: Works, but only in 2 channel mode
DIN(for controlling creative brand speakers i guess): Untested
USB 2.0 connection.

----------------------------------------------------------------------
 Henni - 05-23-05 12:37 
----------------------------------------------------------------------
I retested everything with ALSA Version 1.0.9-rc3 and now the Optical
Digital Out works perfect (I didn't test the Coaxial Out) with mplayer:

Tested with following output formats:

*) Dolby Digital AC3 2.0
*) Dolby Digital AC3 5.1
*) DTS 5.1
*) DTS 6.1
*) PCM

Only thing you have to is to set the AudioOut Device of mplayer to -ao
alsa:device=default (if you try to use -ao alsa without device=default it
tries to open a iec9.. device which doesn't work) and using Audiocodec
hwac3 (for DD) or hwdts (for DTS).

4 Channel and 6 Channel Mode are working perfectly (at the DigitalOut you
only get PCM-Stereo) using the Speaker outputs of the device.

There are no more problems setting the Volume higher than aroung 75% (in
the past it stopped playing and you had to reload the driver). The only
thing you have to do is to unmute it when you change the output at the
device (as an example if you unplug the digital-out and plug in
headphones.)

Issue History
Date Modified  Username       Field                    Change              
======================================================================
11-23-04 19:23 Henni          New Issue                                    
11-23-04 19:23 Henni          File Added: output.txt                       
11-23-04 19:23 Henni          Distribution              => Gentoo 2004.3   
11-23-04 19:23 Henni          Kernel Version            => 2.6.9-cko3      
11-23-04 19:58 Henni          Issue Monitored: Henni                       
11-23-04 21:09 pzad           Note Added: 0002527                          
11-24-04 00:51 Henni          Note Added: 0002540                          
01-09-05 02:04 kempokaraterulzNote Added: 0003133                          
03-19-05 02:04 chaosmcgruff   Issue Monitored: chaosmcgruff                    
05-23-05 12:37 Henni          Note Added: 0004703                          
======================================================================




-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click

             reply	other threads:[~2005-05-23 10:37 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-05-23 10:37 bugtrack [this message]
  -- strict thread matches above, loose matches on Subject: below --
2005-12-03 15:51 [ALSA - driver 0000669]: Creative SB Live! 24-bit External (USB) works only at a minimal level bugtrack
2005-01-09  1:04 bugtrack
2004-11-23 23:51 bugtrack
2004-11-23 20:09 bugtrack
2004-11-23 18:23 bugtrack

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=947504005d99a3a9c382330cb295bc08@bugtrack.alsa-project.org \
    --to=bugtrack@alsa-project.org \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox