* [ALSA - driver 0001715]: after driver update message "(MIXER,'Front Playback Volume',0,0,0) appears twice or more" is shown
@ 2006-01-04 19:56 bugtrack
0 siblings, 0 replies; 4+ messages in thread
From: bugtrack @ 2006-01-04 19:56 UTC (permalink / raw)
To: alsa-devel
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1715>
======================================================================
Reported By: dalth
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1715
Category: PCI - emu10k1
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.15, no 4K-stacks, no regparm, highmem=off
======================================================================
Date Submitted: 01-04-2006 20:56 CET
Last Modified: 01-04-2006 20:56 CET
======================================================================
Summary: after driver update message "(MIXER,'Front Playback
Volume',0,0,0) appears twice or more" is shown
Description:
After update Linux kernel from 2.6.14 (it has ALSA 1.0.10rc1 included) to
2.6.15 (it contains ALSA 1.0.10rc3) all alsa utilities exits with the
following message:
ALSA lib simple_none.c:1216:(simple_add1) helem (MIXER,'Front Playback
Volume',0,0,0) appears twice or more
In fact, I test it with following combinations:
alsa-driver-1.0.10rc1 from 2.6.14 and alsa-lib-1.0.9 works fine
alsa-driver-1.0.10rc1 from 2.6.14 and alsa-lib-1.0.10 works fine
alsa-driver-1.0.10rc3 from 2.6.14 and alsa-lib-1.0.9 doesn't work
alsa-driver-1.0.10 (from this site) and alsa-lib-1.0.10 doesn't work
alsa-driver-1.0.11rc2 and alsa-lib-1.0.10 doesn't work
I tried to create a simple quick-n-dirty workaround in the alsa-lib source
that passed over this check and allows me to avoid alsa utilities
termination. So I forced alsamixer, amixer and some other alsa-dependent
applications like esd or beep-media-player to work properly.
But Line-In is not working (I checked that line-in control was set to 100%
and it is not in Mute state), so when I use a TV-tuner that connected to
line-in jack, there are no sound.
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
01-04-06 20:56 dalth New Issue
01-04-06 20:56 dalth Kernel Version => 2.6.15, no 4K-stacks,
no regparm, highmem=off
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ALSA - driver 0001715]: after driver update message "(MIXER,'Front Playback Volume',0,0,0) appears twice or more" is shown
@ 2006-01-04 20:22 bugtrack
0 siblings, 0 replies; 4+ messages in thread
From: bugtrack @ 2006-01-04 20:22 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1715>
======================================================================
Reported By: dalth
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1715
Category: PCI - emu10k1
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.15, no 4K-stacks, no regparm, highmem=off
======================================================================
Date Submitted: 01-04-2006 20:56 CET
Last Modified: 01-04-2006 21:22 CET
======================================================================
Summary: after driver update message "(MIXER,'Front Playback
Volume',0,0,0) appears twice or more" is shown
Description:
After update Linux kernel from 2.6.14 (it has ALSA 1.0.10rc1 included) to
2.6.15 (it contains ALSA 1.0.10rc3) all alsa utilities exits with the
following message:
ALSA lib simple_none.c:1216:(simple_add1) helem (MIXER,'Front Playback
Volume',0,0,0) appears twice or more
In fact, I test it with following combinations:
alsa-driver-1.0.10rc1 from 2.6.14 and alsa-lib-1.0.9 works fine
alsa-driver-1.0.10rc1 from 2.6.14 and alsa-lib-1.0.10 works fine
alsa-driver-1.0.10rc3 from 2.6.14 and alsa-lib-1.0.9 doesn't work
alsa-driver-1.0.10 (from this site) and alsa-lib-1.0.10 doesn't work
alsa-driver-1.0.11rc2 and alsa-lib-1.0.10 doesn't work
I tried to create a simple quick-n-dirty workaround in the alsa-lib source
that passed over this check and allows me to avoid alsa utilities
termination. So I forced alsamixer, amixer and some other alsa-dependent
applications like esd or beep-media-player to work properly.
But Line-In is not working (I checked that line-in control was set to 100%
and it is not in Mute state), so when I use a TV-tuner that connected to
line-in jack, there are no sound.
======================================================================
----------------------------------------------------------------------
dalth - 01-04-06 21:22
----------------------------------------------------------------------
Ooops! I found a similar topic in buglist - it is a bug 0001681 that is
open:
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1681
In fact, "jcdutton" has the same card and the same problem.
Issue History
Date Modified Username Field Change
======================================================================
01-04-06 20:56 dalth New Issue
01-04-06 20:56 dalth Kernel Version => 2.6.15, no 4K-stacks,
no regparm, highmem=off
01-04-06 21:22 dalth Note Added: 0007452
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ALSA - driver 0001715]: after driver update message "(MIXER,'Front Playback Volume',0,0,0) appears twice or more" is shown
@ 2006-01-05 9:33 bugtrack
0 siblings, 0 replies; 4+ messages in thread
From: bugtrack @ 2006-01-05 9:33 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1715>
======================================================================
Reported By: dalth
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1715
Category: PCI - emu10k1
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution:
Kernel Version: 2.6.15, no 4K-stacks, no regparm, highmem=off
======================================================================
Date Submitted: 01-04-2006 20:56 CET
Last Modified: 01-05-2006 10:33 CET
======================================================================
Summary: after driver update message "(MIXER,'Front Playback
Volume',0,0,0) appears twice or more" is shown
Description:
After update Linux kernel from 2.6.14 (it has ALSA 1.0.10rc1 included) to
2.6.15 (it contains ALSA 1.0.10rc3) all alsa utilities exits with the
following message:
ALSA lib simple_none.c:1216:(simple_add1) helem (MIXER,'Front Playback
Volume',0,0,0) appears twice or more
In fact, I test it with following combinations:
alsa-driver-1.0.10rc1 from 2.6.14 and alsa-lib-1.0.9 works fine
alsa-driver-1.0.10rc1 from 2.6.14 and alsa-lib-1.0.10 works fine
alsa-driver-1.0.10rc3 from 2.6.14 and alsa-lib-1.0.9 doesn't work
alsa-driver-1.0.10 (from this site) and alsa-lib-1.0.10 doesn't work
alsa-driver-1.0.11rc2 and alsa-lib-1.0.10 doesn't work
I tried to create a simple quick-n-dirty workaround in the alsa-lib source
that passed over this check and allows me to avoid alsa utilities
termination. So I forced alsamixer, amixer and some other alsa-dependent
applications like esd or beep-media-player to work properly.
But Line-In is not working (I checked that line-in control was set to 100%
and it is not in Mute state), so when I use a TV-tuner that connected to
line-in jack, there are no sound.
======================================================================
----------------------------------------------------------------------
dalth - 01-04-06 21:22
----------------------------------------------------------------------
Ooops! I found a similar topic in buglist - it is a bug 0001681 that is
open:
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1681
In fact, "jcdutton" has the same card and the same problem.
----------------------------------------------------------------------
dalth - 01-05-06 10:33
----------------------------------------------------------------------
I was stupid.
Problem has been solved - I've described dirty solution in a bug 1681
notes,
so now all works fine - except mplayer "tv" mode with v4l2, but it's not
an
ALSA problem.
Issue History
Date Modified Username Field Change
======================================================================
01-04-06 20:56 dalth New Issue
01-04-06 20:56 dalth Kernel Version => 2.6.15, no 4K-stacks,
no regparm, highmem=off
01-04-06 21:22 dalth Note Added: 0007452
01-05-06 10:33 dalth Note Added: 0007467
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ALSA - driver 0001715]: after driver update message "(MIXER,'Front Playback Volume',0,0,0) appears twice or more" is shown
@ 2006-01-05 18:42 bugtrack
0 siblings, 0 replies; 4+ messages in thread
From: bugtrack @ 2006-01-05 18:42 UTC (permalink / raw)
To: alsa-devel
The following issue has been RESOLVED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1715>
======================================================================
Reported By: dalth
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 1715
Category: PCI - emu10k1
Reproducibility: always
Severity: minor
Priority: normal
Status: resolved
Distribution:
Kernel Version: 2.6.15, no 4K-stacks, no regparm, highmem=off
Resolution: fixed
Fixed in Version:
======================================================================
Date Submitted: 01-04-2006 20:56 CET
Last Modified: 01-05-2006 19:42 CET
======================================================================
Summary: after driver update message "(MIXER,'Front Playback
Volume',0,0,0) appears twice or more" is shown
Description:
After update Linux kernel from 2.6.14 (it has ALSA 1.0.10rc1 included) to
2.6.15 (it contains ALSA 1.0.10rc3) all alsa utilities exits with the
following message:
ALSA lib simple_none.c:1216:(simple_add1) helem (MIXER,'Front Playback
Volume',0,0,0) appears twice or more
In fact, I test it with following combinations:
alsa-driver-1.0.10rc1 from 2.6.14 and alsa-lib-1.0.9 works fine
alsa-driver-1.0.10rc1 from 2.6.14 and alsa-lib-1.0.10 works fine
alsa-driver-1.0.10rc3 from 2.6.14 and alsa-lib-1.0.9 doesn't work
alsa-driver-1.0.10 (from this site) and alsa-lib-1.0.10 doesn't work
alsa-driver-1.0.11rc2 and alsa-lib-1.0.10 doesn't work
I tried to create a simple quick-n-dirty workaround in the alsa-lib source
that passed over this check and allows me to avoid alsa utilities
termination. So I forced alsamixer, amixer and some other alsa-dependent
applications like esd or beep-media-player to work properly.
But Line-In is not working (I checked that line-in control was set to 100%
and it is not in Mute state), so when I use a TV-tuner that connected to
line-in jack, there are no sound.
======================================================================
----------------------------------------------------------------------
dalth - 01-05-06 10:33
----------------------------------------------------------------------
I was stupid.
Problem has been solved - I've described dirty solution in a bug 1681
notes,
so now all works fine - except mplayer "tv" mode with v4l2, but it's not
an
ALSA problem.
----------------------------------------------------------------------
tiwai - 01-05-06 19:42
----------------------------------------------------------------------
Fixed on CVS.
Issue History
Date Modified Username Field Change
======================================================================
01-04-06 20:56 dalth New Issue
01-04-06 20:56 dalth Kernel Version => 2.6.15, no 4K-stacks,
no regparm, highmem=off
01-04-06 21:22 dalth Note Added: 0007452
01-05-06 10:33 dalth Note Added: 0007467
01-05-06 19:42 tiwai Status new => resolved
01-05-06 19:42 tiwai Resolution open => fixed
01-05-06 19:42 tiwai Assigned To => tiwai
01-05-06 19:42 tiwai Note Added: 0007475
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-01-05 18:42 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-01-05 9:33 [ALSA - driver 0001715]: after driver update message "(MIXER,'Front Playback Volume',0,0,0) appears twice or more" is shown bugtrack
-- strict thread matches above, loose matches on Subject: below --
2006-01-05 18:42 bugtrack
2006-01-04 20:22 bugtrack
2006-01-04 19:56 bugtrack
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox