Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Jeeja KP <jeeja.kp@intel.com>, Vinod Koul <vinod.koul@intel.com>,
	Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Subject: Applied "ASoC: Intel: Skylake: Clear stream registers before stream setup" to the asoc tree
Date: Fri, 18 Dec 2015 17:14:36 +0000	[thread overview]
Message-ID: <E1a9yc0-0000Zp-KD@debutante> (raw)
In-Reply-To: <1449816267-11910-2-git-send-email-vinod.koul@intel.com>

The patch

   ASoC: Intel: Skylake: Clear stream registers before stream setup

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From a4386450bf08cd968bf41ff30a92caf74262c9d6 Mon Sep 17 00:00:00 2001
From: Jeeja KP <jeeja.kp@intel.com>
Date: Fri, 18 Dec 2015 15:11:57 +0530
Subject: [PATCH] ASoC: Intel: Skylake: Clear stream registers before stream
 setup

This patch adds clean up routine to clear the stream registers and
calls this routine before setting up stream registers.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/intel/skylake/skl-sst-cldma.c | 38 ++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 15 deletions(-)

diff --git a/sound/soc/intel/skylake/skl-sst-cldma.c b/sound/soc/intel/skylake/skl-sst-cldma.c
index 8c7e8576cba3..da2329d17f4d 100644
--- a/sound/soc/intel/skylake/skl-sst-cldma.c
+++ b/sound/soc/intel/skylake/skl-sst-cldma.c
@@ -60,6 +60,27 @@ static void skl_cldma_stream_run(struct sst_dsp  *ctx, bool enable)
 		dev_err(ctx->dev, "Failed to set Run bit=%d enable=%d\n", val, enable);
 }
 
+static void skl_cldma_stream_clear(struct sst_dsp  *ctx)
+{
+	/* make sure Run bit is cleared before setting stream register */
+	skl_cldma_stream_run(ctx, 0);
+
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+				CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(0));
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+				CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(0));
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+				CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(0));
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+				CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(0));
+
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL, CL_SD_BDLPLBA(0));
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU, 0);
+
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, 0);
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, 0);
+}
+
 /* Code loader helper APIs */
 static void skl_cldma_setup_bdle(struct sst_dsp *ctx,
 		struct snd_dma_buffer *dmab_data,
@@ -95,6 +116,7 @@ static void skl_cldma_setup_controller(struct sst_dsp  *ctx,
 		struct snd_dma_buffer *dmab_bdl, unsigned int max_size,
 		u32 count)
 {
+	skl_cldma_stream_clear(ctx);
 	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL,
 			CL_SD_BDLPLBA(dmab_bdl->addr));
 	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU,
@@ -137,21 +159,7 @@ static void skl_cldma_cleanup_spb(struct sst_dsp  *ctx)
 static void skl_cldma_cleanup(struct sst_dsp  *ctx)
 {
 	skl_cldma_cleanup_spb(ctx);
-
-	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
-				CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(0));
-	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
-				CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(0));
-	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
-				CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(0));
-	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
-				CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(0));
-
-	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL, CL_SD_BDLPLBA(0));
-	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU, 0);
-
-	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, 0);
-	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, 0);
+	skl_cldma_stream_clear(ctx);
 
 	ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data);
 	ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_bdl);
-- 
2.6.2

  reply	other threads:[~2015-12-18 17:14 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-11  6:44 [PATCH 00/14] ASoC: Intel: Skylake: Update to SKL driver Vinod Koul
2015-12-11  6:44 ` [PATCH 01/14] ASoC: Intel: Skylake: Clear stream registers before stream setup Vinod Koul
2015-12-18 17:14   ` Mark Brown [this message]
2015-12-11  6:44 ` [PATCH 02/14] ASoC: Intel: Skylake: Fix to set pipe state to invalid when deleting Vinod Koul
2015-12-18 17:14   ` Applied "ASoC: Intel: Skylake: Fix to set pipe state to invalid when deleting" to the asoc tree Mark Brown
2015-12-11  6:44 ` [PATCH 03/14] ALSA: hdac: Add support for hda DMA Resume capability Vinod Koul
2016-01-10 12:07   ` Applied "ALSA: hdac: Add support for hda DMA Resume capability" to the asoc tree Mark Brown
2015-12-11  6:44 ` [PATCH 04/14] ALSA: hdac: couple the hda DMA stream in cleanup Vinod Koul
2016-01-10 12:07   ` Applied "ALSA: hdac: couple the hda DMA stream in cleanup" to the asoc tree Mark Brown
2015-12-11  6:44 ` [PATCH 05/14] ALSA: hdac: Add MISCBDCGE support Vinod Koul
2015-12-11  8:54   ` Takashi Iwai
2015-12-11  9:25     ` Vinod Koul
2015-12-11  9:51       ` Takashi Iwai
     [not found]   ` <201512120531.wHapk8nX%fengguang.wu@intel.com>
2015-12-12 11:43     ` Vinod Koul
2015-12-11  6:44 ` [PATCH 06/14] ALSA: hdac: Increase timeout value for link power check Vinod Koul
2016-01-10 12:07   ` Applied "ALSA: hdac: Increase timeout value for link power check" to the asoc tree Mark Brown
2015-12-11  6:44 ` [PATCH 07/14] ALSA: hdac: add snd_hdac_ext_bus_link_power_up_all Vinod Koul
2016-01-10 12:07   ` Applied "ALSA: hdac: add snd_hdac_ext_bus_link_power_up_all" to the asoc tree Mark Brown
2015-12-11  6:44 ` [PATCH 08/14] ASoC: Intel: Skylake: fix reset controller sequencing Vinod Koul
2015-12-11  6:44 ` [PATCH 09/14] ASoC: Intel: Skylake: Use CGCTL.MISCBDCGE for Phrase detection notification Vinod Koul
2015-12-11  6:44 ` [PATCH 10/14] ASoC: Intel: Skylake: manage link power in active suspend Vinod Koul
2016-01-10 12:22   ` Applied "ASoC: Intel: Skylake: manage link power in active suspend" to the asoc tree Mark Brown
2015-12-11  6:44 ` [PATCH 11/14] ASoC: Intel: Skylake: enable interrupt as wake source in active suspend Vinod Koul
2016-01-10 12:22   ` Applied "ASoC: Intel: Skylake: enable interrupt as wake source in active suspend" to the asoc tree Mark Brown
2015-12-11  6:44 ` [PATCH 12/14] ASoC: Intel: Skylake: Add DMA resume position in Trigger resume/suspend Vinod Koul
2016-01-10 12:22   ` Applied "ASoC: Intel: Skylake: Add DMA resume position in Trigger resume/suspend" to the asoc tree Mark Brown
2015-12-11  6:44 ` [PATCH 13/14] ASoC: Intel: Skylake: Reconfigure Link stream on suspend/resume Vinod Koul
2016-01-10 12:22   ` Applied "ASoC: Intel: Skylake: Reconfigure Link stream on suspend/resume" to the asoc tree Mark Brown
2015-12-11  6:44 ` [PATCH 14/14] ASoC: Intel: Skylake: Add Resume capability in PCM info Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1a9yc0-0000Zp-KD@debutante \
    --to=broonie@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=jeeja.kp@intel.com \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox