From: Mark Brown <broonie@kernel.org>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Mark Brown <broonie@kernel.org>Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-renesas-soc@vger.kernel.org,
Linux-ALSA <alsa-devel@alsa-project.org>,
Simon <horms@verge.net.au>
Subject: Applied "ASoC: rsrc-card: use asoc_simple_card_parse_dailink_name()" to the asoc tree
Date: Sat, 16 Jul 2016 13:05:33 +0100 [thread overview]
Message-ID: <E1bOOLd-0005GR-F8@debutante> (raw)
In-Reply-To: <87vb0jlgt7.wl%kuninori.morimoto.gx@renesas.com>
The patch
ASoC: rsrc-card: use asoc_simple_card_parse_dailink_name()
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 8a99a6bd7f410e1b889c8cc59538009f40507aac Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Mon, 11 Jul 2016 23:58:25 +0000
Subject: [PATCH] ASoC: rsrc-card: use asoc_simple_card_parse_dailink_name()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/sh/rcar/rsrc-card.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/sound/soc/sh/rcar/rsrc-card.c b/sound/soc/sh/rcar/rsrc-card.c
index c065a6df0680..81914ca56f00 100644
--- a/sound/soc/sh/rcar/rsrc-card.c
+++ b/sound/soc/sh/rcar/rsrc-card.c
@@ -47,7 +47,6 @@ static const struct of_device_id rsrc_card_of_match[] = {
};
MODULE_DEVICE_TABLE(of, rsrc_card_of_match);
-#define DAI_NAME_NUM 32
struct rsrc_card_dai {
unsigned int sysclk;
unsigned int tx_slot_mask;
@@ -55,7 +54,6 @@ struct rsrc_card_dai {
int slots;
int slot_width;
struct clk *clk;
- char dai_name[DAI_NAME_NUM];
};
#define IDX_CPU 0
@@ -163,6 +161,7 @@ static int rsrc_card_parse_links(struct device_node *np,
struct rsrc_card_priv *priv,
int idx, bool is_fe)
{
+ struct device *dev = rsrc_priv_to_dev(priv);
struct snd_soc_dai_link *dai_link = rsrc_priv_to_link(priv, idx);
struct rsrc_card_dai *dai_props = rsrc_priv_to_props(priv, idx);
struct of_phandle_args args;
@@ -200,9 +199,11 @@ static int rsrc_card_parse_links(struct device_node *np,
if (ret < 0)
return ret;
- /* set dai_name */
- snprintf(dai_props->dai_name, DAI_NAME_NUM, "fe.%s",
- dai_link->cpu_dai_name);
+ ret = asoc_simple_card_set_dailink_name(dev, dai_link,
+ "fe.%s",
+ dai_link->cpu_dai_name);
+ if (ret < 0)
+ return ret;
/*
* In soc_bind_dai_link() will check cpu name after
@@ -216,7 +217,6 @@ static int rsrc_card_parse_links(struct device_node *np,
if (!args.args_count)
dai_link->cpu_dai_name = NULL;
} else {
- struct device *dev = rsrc_priv_to_dev(priv);
const struct rsrc_card_of_data *of_data;
of_data = of_device_get_match_data(dev);
@@ -234,6 +234,12 @@ static int rsrc_card_parse_links(struct device_node *np,
if (ret < 0)
return ret;
+ ret = asoc_simple_card_set_dailink_name(dev, dai_link,
+ "be.%s",
+ dai_link->codec_dai_name);
+ if (ret < 0)
+ return ret;
+
/* additional name prefix */
if (of_data) {
priv->codec_conf.of_node = dai_link->codec_of_node;
@@ -244,18 +250,12 @@ static int rsrc_card_parse_links(struct device_node *np,
dai_link->codec_of_node,
"audio-prefix");
}
-
- /* set dai_name */
- snprintf(dai_props->dai_name, DAI_NAME_NUM, "be.%s",
- dai_link->codec_dai_name);
}
/* Simple Card assumes platform == cpu */
dai_link->platform_of_node = dai_link->cpu_of_node;
dai_link->dpcm_playback = 1;
dai_link->dpcm_capture = 1;
- dai_link->name = dai_props->dai_name;
- dai_link->stream_name = dai_props->dai_name;
dai_link->ops = &rsrc_card_ops;
dai_link->init = rsrc_card_dai_init;
@@ -316,7 +316,7 @@ static int rsrc_card_dai_sub_link_of(struct device_node *node,
return ret;
dev_dbg(dev, "\t%s / %04x / %d\n",
- dai_props->dai_name,
+ dai_link->name,
dai_link->dai_fmt,
dai_props->sysclk);
--
2.8.1
next prev parent reply other threads:[~2016-07-16 12:05 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-06 1:06 [PATCH 0/7] ASoC: simple: dailink_name and card_name Kuninori Morimoto
2016-07-06 1:01 ` [PATCH 1/7] ASoC: simple-card-utils: add asoc_simple_card_set_dailink_name() Kuninori Morimoto
2016-07-08 12:43 ` Mark Brown
2016-07-06 1:09 ` [PATCH 2/7] ASoC: simple-card: use asoc_simple_card_parse_dailink_name() Kuninori Morimoto
2016-07-16 12:04 ` Applied "ASoC: simple-card: use asoc_simple_card_parse_dailink_name()" to the asoc tree Mark Brown
2016-07-06 1:09 ` [PATCH 3/7] ASoC: rsrc-card: use asoc_simple_card_parse_dailink_name() Kuninori Morimoto
2016-07-16 12:05 ` Mark Brown [this message]
2016-07-06 1:09 ` [PATCH 4/7] ASoC: rsrc-card: use asoc_simple_dai instead of rsrc_card_dai Kuninori Morimoto
2016-07-16 12:05 ` Applied "ASoC: rsrc-card: use asoc_simple_dai instead of rsrc_card_dai" to the asoc tree Mark Brown
2016-07-06 1:10 ` [PATCH 5/7] ASoC: simple-card-utils: add asoc_simple_card_parse_card_name() Kuninori Morimoto
2016-07-16 12:04 ` Applied "ASoC: simple-card-utils: add asoc_simple_card_parse_card_name()" to the asoc tree Mark Brown
2016-07-06 1:11 ` [PATCH 6/7] ASoC: simple-card: use asoc_simple_card_parse_card_name() Kuninori Morimoto
2016-07-06 1:11 ` [PATCH 7/7] ASoC: rsrc-card: " Kuninori Morimoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1bOOLd-0005GR-F8@debutante \
--to=broonie@kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox