[PATCH v4 00/42] ep93xx device tree conversion

[PATCH v4 00/42] ep93xx device tree conversion

[Nikita Shubin via B4 Relay]

This series aims to convert ep93xx from platform to full device tree support.

The main goal is to receive ACK's to take it via Arnd's arm-soc branch.

Major changes:
- drop newline at the end from each YAML files
- rename dma and clk bindings headers to match first compatible
- shrink SoC exported functions number to only 2
- dropped some ep93xx_pata fixes from these series
- dropped m48t86 stuff from these series

Bit thanks to Andy Shevchenko for thorough review.

Some parts are were sent in advance, so these series depends on the
following:

Link: https://lore.kernel.org/all/20230823-m48t86_device_tree-v2-0-21ff275f949d@maquefel.me/
Link: https://lore.kernel.org/all/20230823-ep93xx_pata_fixes-v1-0-d7e7229be148@maquefel.me/

---
Changes in v4:

- gpio: ep93xx: split device in multiple
  - s/generic_handle_irq/generic_handle_domain_irq/
  - s/int offset/irq_hw_number_t offset/ though now it looks a bit odd to me
  - drop i = 0
  - drop 'error'
  - use dev_err_probe withour printing devname once again

dt-bindings: clock: Add Cirrus EP93xx
  - renamed cirrus,ep93xx-clock.h -> cirrus,ep9301-clk.h

clk: ep93xx: add DT support for Cirrus EP93xx
  - drop unused includes
  - use .name only for xtali, pll1, pll2 parents
  - convert // to /*
  - pass clk_parent_data instead of char* clock name

dt-bindings: pinctrl: Add Cirrus EP93xx
  - s/additionalProperties/unevaluatedProperties/

dt-bindings: soc: Add Cirrus EP93xx
  - move syscon to soc directory
  - add vendor prefix
  - make reboot same style as pinctrl, clk
  - use absolute path for ref
  - expand example

soc: Add SoC driver for Cirrus ep93xx
  - s/0xf0000000/GENMASK(31, 28)/
  - s/ret/ep93xx_chip_revision(map)/
  - drop symbol exports
  - convert to platform driver

dt-bindings: rtc: Add Cirrus EP93xx
  - allOf: with $ref to rtc.yaml
  - s/additionalProperties/unevaluatedProperties/

dt-bindings: watchdog: Add Cirrus EP93x
  - drop description
  - reword

power: reset: Add a driver for the ep93xx reset
  - lets use 'GPL-2.0+' instead of '(GPL-2.0)'
  - s/of_device/of/
  - drop mdelay with warning
  - return 0 at the end

net: cirrus: add DT support for Cirrus EP93xx
  - fix leaking np

mtd: nand: add support for ts72xx
  - +bits.h
  - drop comment
  - ok to fwnode_get_next_child_node
  - use goto to put handle and nand and report error

ARM: dts: add Cirrus EP93XX SoC .dtsi
  - add simple-bus for ebi, as we don't require to setup anything
  - add arm,pl011 compatible to uart nodes
  - drop i2c-gpio, as it's isn't used anywhere

ARM: dts: ep93xx: add ts7250 board
  - generic node name for temperature-sensor
  - drop i2c
  - move nand, rtc, watchdog to ebi node
 
- Link to v3: https://lore.kernel.org/r/20230605-ep93xx-v3-0-3d63a5f1103e@maquefel.me

---
Alexander Sverdlin (2):
      ARM: dts: ep93xx: Add EDB9302 DT
      ASoC: cirrus: edb93xx: Delete driver

Nikita Shubin (40):
      gpio: ep93xx: split device in multiple
      ARM: ep93xx: add swlocked prototypes
      dt-bindings: clock: Add Cirrus EP93xx
      clk: ep93xx: add DT support for Cirrus EP93xx
      dt-bindings: pinctrl: Add Cirrus EP93xx
      pinctrl: add a Cirrus ep93xx SoC pin controller
      dt-bindings: power: reset: Add ep93xx reset
      power: reset: Add a driver for the ep93xx reset
      dt-bindings: soc: Add Cirrus EP93xx
      soc: Add SoC driver for Cirrus ep93xx
      dt-bindings: timers: Add Cirrus EP93xx
      clocksource: ep93xx: Add driver for Cirrus Logic EP93xx
      dt-bindings: rtc: Add Cirrus EP93xx
      rtc: ep93xx: add DT support for Cirrus EP93xx
      dt-bindings: watchdog: Add Cirrus EP93x
      watchdog: ep93xx: add DT support for Cirrus EP93xx
      dt-bindings: pwm: Add Cirrus EP93xx
      pwm: ep93xx: add DT support for Cirrus EP93xx
      dt-bindings: spi: Add Cirrus EP93xx
      spi: ep93xx: add DT support for Cirrus EP93xx
      dt-bindings: net: Add Cirrus EP93xx
      net: cirrus: add DT support for Cirrus EP93xx
      dt-bindings: dma: Add Cirrus EP93xx
      dma: cirrus: add DT support for Cirrus EP93xx
      dt-bindings: mtd: Add ts7200 nand-controller
      mtd: nand: add support for ts72xx
      dt-bindings: ata: Add Cirrus EP93xx
      ata: pata_ep93xx: add device tree support
      dt-bindings: input: Add Cirrus EP93xx keypad
      input: keypad: ep93xx: add DT support for Cirrus EP93xx
      dt-bindings: wdt: Add ts72xx
      wdt: ts72xx: add DT support for ts72xx
      gpio: ep93xx: add DT support for gpio-ep93xx
      ARM: dts: add Cirrus EP93XX SoC .dtsi
      ARM: dts: ep93xx: add ts7250 board
      ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
      pwm: ep93xx: drop legacy pinctrl
      ata: pata_ep93xx: remove legacy pinctrl use
      ARM: ep93xx: delete all boardfiles
      ARM: ep93xx: soc: drop defines

 .../bindings/arm/cirrus/cirrus,ep9301.yaml         |   38 +
 .../bindings/ata/cirrus,ep9312-pata.yaml           |   42 +
 .../bindings/clock/cirrus,ep9301-clk.yaml          |   46 +
 .../bindings/dma/cirrus,ep9301-dma-m2m.yaml        |   69 +
 .../bindings/dma/cirrus,ep9301-dma-m2p.yaml        |  121 ++
 .../bindings/input/cirrus,ep9307-keypad.yaml       |   87 ++
 .../devicetree/bindings/mtd/technologic,nand.yaml  |   45 +
 .../devicetree/bindings/net/cirrus,ep9301-eth.yaml |   59 +
 .../bindings/pinctrl/cirrus,ep9301-pinctrl.yaml    |   57 +
 .../bindings/power/reset/cirrus,ep9301-reboot.yaml |   34 +
 .../devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml |   46 +
 .../devicetree/bindings/rtc/cirrus,ep9301-rtc.yaml |   42 +
 .../bindings/soc/cirrus/cirrus,ep9301-syscon.yaml  |   71 +
 .../devicetree/bindings/spi/cirrus,ep9301-spi.yaml |   61 +
 .../bindings/timer/cirrus,ep9301-timer.yaml        |   49 +
 .../bindings/watchdog/cirrus,ep9301-wdt.yaml       |   42 +
 .../bindings/watchdog/technologic,ts7200-wdt.yaml  |   45 +
 arch/arm/Makefile                                  |    1 -
 arch/arm/boot/dts/cirrus/Makefile                  |    4 +
 arch/arm/boot/dts/cirrus/ep93xx-bk3.dts            |  124 ++
 arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts        |  180 +++
 arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts         |  143 ++
 arch/arm/boot/dts/cirrus/ep93xx.dtsi               |  454 +++++++
 arch/arm/mach-ep93xx/Kconfig                       |   20 +-
 arch/arm/mach-ep93xx/Makefile                      |   11 -
 arch/arm/mach-ep93xx/clock.c                       |  733 ----------
 arch/arm/mach-ep93xx/core.c                        | 1017 --------------
 arch/arm/mach-ep93xx/dma.c                         |  114 --
 arch/arm/mach-ep93xx/edb93xx.c                     |  344 -----
 arch/arm/mach-ep93xx/ep93xx-regs.h                 |   38 -
 arch/arm/mach-ep93xx/gpio-ep93xx.h                 |  111 --
 arch/arm/mach-ep93xx/hardware.h                    |   25 -
 arch/arm/mach-ep93xx/irqs.h                        |   76 --
 arch/arm/mach-ep93xx/platform.h                    |   42 -
 arch/arm/mach-ep93xx/soc.h                         |  212 ---
 arch/arm/mach-ep93xx/ts72xx.c                      |  422 ------
 arch/arm/mach-ep93xx/ts72xx.h                      |   94 --
 arch/arm/mach-ep93xx/vision_ep9307.c               |  311 -----
 drivers/ata/pata_ep93xx.c                          |   33 +-
 drivers/clk/Kconfig                                |    8 +
 drivers/clk/Makefile                               |    1 +
 drivers/clk/clk-ep93xx.c                           |  753 +++++++++++
 drivers/clocksource/Kconfig                        |   11 +
 drivers/clocksource/Makefile                       |    1 +
 .../clocksource}/timer-ep93xx.c                    |  155 ++-
 drivers/dma/ep93xx_dma.c                           |  125 +-
 drivers/gpio/gpio-ep93xx.c                         |  331 ++---
 drivers/input/keyboard/ep93xx_keypad.c             |   74 +-
 drivers/mtd/nand/raw/Kconfig                       |    7 +
 drivers/mtd/nand/raw/Makefile                      |    1 +
 drivers/mtd/nand/raw/technologic-nand-controller.c |  166 +++
 drivers/net/ethernet/cirrus/ep93xx_eth.c           |   63 +-
 drivers/pinctrl/Kconfig                            |    7 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-ep93xx.c                   | 1429 ++++++++++++++++++++
 drivers/power/reset/Kconfig                        |   10 +
 drivers/power/reset/Makefile                       |    1 +
 drivers/power/reset/ep93xx-restart.c               |   85 ++
 drivers/pwm/pwm-ep93xx.c                           |   26 +-
 drivers/rtc/rtc-ep93xx.c                           |    8 +
 drivers/soc/Kconfig                                |    1 +
 drivers/soc/Makefile                               |    1 +
 drivers/soc/cirrus/Kconfig                         |   12 +
 drivers/soc/cirrus/Makefile                        |    2 +
 drivers/soc/cirrus/soc-ep93xx.c                    |  215 +++
 drivers/spi/spi-ep93xx.c                           |   28 +-
 drivers/watchdog/ep93xx_wdt.c                      |    8 +
 drivers/watchdog/ts72xx_wdt.c                      |    8 +
 include/dt-bindings/clock/cirrus,ep9301-clk.h      |   41 +
 include/dt-bindings/dma/cirrus,ep93xx-dma.h        |   26 +
 include/linux/platform_data/dma-ep93xx.h           |   25 +-
 include/linux/platform_data/eth-ep93xx.h           |   10 -
 include/linux/platform_data/keypad-ep93xx.h        |   32 -
 include/linux/soc/cirrus/ep93xx.h                  |   29 +-
 sound/soc/cirrus/Kconfig                           |    9 -
 sound/soc/cirrus/Makefile                          |    4 -
 sound/soc/cirrus/edb93xx.c                         |  117 --
 77 files changed, 5126 insertions(+), 4168 deletions(-)
---
base-commit: bdc09c8e8b16d494ccd1c56e903e78dd76455a35
change-id: 20230605-ep93xx-01c76317e2d2

Best regards,
-- 
Nikita Shubin <nikita.shubin@maquefel.me>

[PATCH v4 42/42] ASoC: cirrus: edb93xx: Delete driver

[Nikita Shubin via B4 Relay]

From: Alexander Sverdlin <alexander.sverdlin@gmail.com>

Can be replaced with "simple-audio-card" for the rates up to 50kHz, refer
to commit "ARM: dts: ep93xx: Add EDB9302 DT".

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
 sound/soc/cirrus/Kconfig   |   9 ----
 sound/soc/cirrus/Makefile  |   4 --
 sound/soc/cirrus/edb93xx.c | 117 ---------------------------------------------
 3 files changed, 130 deletions(-)

diff --git a/sound/soc/cirrus/Kconfig b/sound/soc/cirrus/Kconfig
index 38a83c4dcc2d..97def4e53fbc 100644
--- a/sound/soc/cirrus/Kconfig
+++ b/sound/soc/cirrus/Kconfig
@@ -31,12 +31,3 @@ config SND_EP93XX_SOC_I2S_WATCHDOG
 
 endif # if SND_EP93XX_SOC_I2S
 
-config SND_EP93XX_SOC_EDB93XX
-	tristate "SoC Audio support for Cirrus Logic EDB93xx boards"
-	depends on SND_EP93XX_SOC && (MACH_EDB9301 || MACH_EDB9302 || MACH_EDB9302A || MACH_EDB9307A || MACH_EDB9315A)
-	select SND_EP93XX_SOC_I2S
-	select SND_SOC_CS4271_I2C if I2C
-	select SND_SOC_CS4271_SPI if SPI_MASTER
-	help
-	  Say Y or M here if you want to add support for I2S audio on the
-	  Cirrus Logic EDB93xx boards.
diff --git a/sound/soc/cirrus/Makefile b/sound/soc/cirrus/Makefile
index 19a86daad660..5916c03888cb 100644
--- a/sound/soc/cirrus/Makefile
+++ b/sound/soc/cirrus/Makefile
@@ -6,7 +6,3 @@ snd-soc-ep93xx-i2s-objs	 			:= ep93xx-i2s.o
 obj-$(CONFIG_SND_EP93XX_SOC)			+= snd-soc-ep93xx.o
 obj-$(CONFIG_SND_EP93XX_SOC_I2S)		+= snd-soc-ep93xx-i2s.o
 
-# EP93XX Machine Support
-snd-soc-edb93xx-objs				:= edb93xx.o
-
-obj-$(CONFIG_SND_EP93XX_SOC_EDB93XX)		+= snd-soc-edb93xx.o
diff --git a/sound/soc/cirrus/edb93xx.c b/sound/soc/cirrus/edb93xx.c
deleted file mode 100644
index f49caab21a25..000000000000
--- a/sound/soc/cirrus/edb93xx.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SoC audio for EDB93xx
- *
- * Copyright (c) 2010 Alexander Sverdlin <subaparts@yandex.ru>
- *
- * This driver support CS4271 codec being master or slave, working
- * in control port mode, connected either via SPI or I2C.
- * The data format accepted is I2S or left-justified.
- * DAPM support not implemented.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/soc/cirrus/ep93xx.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <asm/mach-types.h>
-
-static int edb93xx_hw_params(struct snd_pcm_substream *substream,
-			     struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
-	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
-	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
-	int err;
-	unsigned int mclk_rate;
-	unsigned int rate = params_rate(params);
-
-	/*
-	 * According to CS4271 datasheet we use MCLK/LRCK=256 for
-	 * rates below 50kHz and 128 for higher sample rates
-	 */
-	if (rate < 50000)
-		mclk_rate = rate * 64 * 4;
-	else
-		mclk_rate = rate * 64 * 2;
-
-	err = snd_soc_dai_set_sysclk(codec_dai, 0, mclk_rate,
-				     SND_SOC_CLOCK_IN);
-	if (err)
-		return err;
-
-	return snd_soc_dai_set_sysclk(cpu_dai, 0, mclk_rate,
-				      SND_SOC_CLOCK_OUT);
-}
-
-static const struct snd_soc_ops edb93xx_ops = {
-	.hw_params	= edb93xx_hw_params,
-};
-
-SND_SOC_DAILINK_DEFS(hifi,
-	DAILINK_COMP_ARRAY(COMP_CPU("ep93xx-i2s")),
-	DAILINK_COMP_ARRAY(COMP_CODEC("spi0.0", "cs4271-hifi")),
-	DAILINK_COMP_ARRAY(COMP_PLATFORM("ep93xx-i2s")));
-
-static struct snd_soc_dai_link edb93xx_dai = {
-	.name		= "CS4271",
-	.stream_name	= "CS4271 HiFi",
-	.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-			  SND_SOC_DAIFMT_CBC_CFC,
-	.ops		= &edb93xx_ops,
-	SND_SOC_DAILINK_REG(hifi),
-};
-
-static struct snd_soc_card snd_soc_edb93xx = {
-	.name		= "EDB93XX",
-	.owner		= THIS_MODULE,
-	.dai_link	= &edb93xx_dai,
-	.num_links	= 1,
-};
-
-static int edb93xx_probe(struct platform_device *pdev)
-{
-	struct snd_soc_card *card = &snd_soc_edb93xx;
-	int ret;
-
-	ret = ep93xx_i2s_acquire();
-	if (ret)
-		return ret;
-
-	card->dev = &pdev->dev;
-
-	ret = snd_soc_register_card(card);
-	if (ret) {
-		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
-			ret);
-		ep93xx_i2s_release();
-	}
-
-	return ret;
-}
-
-static void edb93xx_remove(struct platform_device *pdev)
-{
-	struct snd_soc_card *card = platform_get_drvdata(pdev);
-
-	snd_soc_unregister_card(card);
-	ep93xx_i2s_release();
-}
-
-static struct platform_driver edb93xx_driver = {
-	.driver		= {
-		.name	= "edb93xx-audio",
-	},
-	.probe		= edb93xx_probe,
-	.remove_new	= edb93xx_remove,
-};
-
-module_platform_driver(edb93xx_driver);
-
-MODULE_AUTHOR("Alexander Sverdlin <subaparts@yandex.ru>");
-MODULE_DESCRIPTION("ALSA SoC EDB93xx");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:edb93xx-audio");

-- 
2.39.2

Re: [PATCH v4 42/42] ASoC: cirrus: edb93xx: Delete driver

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 350 bytes --]

On Fri, Sep 15, 2023 at 11:11:24AM +0300, Nikita Shubin via B4 Relay wrote:
> From: Alexander Sverdlin <alexander.sverdlin@gmail.com>
> 
> Can be replaced with "simple-audio-card" for the rates up to 50kHz, refer
> to commit "ARM: dts: ep93xx: Add EDB9302 DT".

Please use audio-graph-card2 for new systems, it's a more flexible
replacement.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v4 00/42] ep93xx device tree conversion

[Andy Shevchenko]

On Fri, Sep 15, 2023 at 11:10:42AM +0300, Nikita Shubin via B4 Relay wrote:
> This series aims to convert ep93xx from platform to full device tree support.
> 
> The main goal is to receive ACK's to take it via Arnd's arm-soc branch.
> 
> Major changes:
> - drop newline at the end from each YAML files
> - rename dma and clk bindings headers to match first compatible
> - shrink SoC exported functions number to only 2
> - dropped some ep93xx_pata fixes from these series
> - dropped m48t86 stuff from these series
> 
> Bit thanks to Andy Shevchenko for thorough review.

You are welcome!

Dunno if you have used --patience when formatted the patches, but I think
you should, if hadn't, for the next version. It will help a lot in reviewing
and understanding the changes.

-- 
With Best Regards,
Andy Shevchenko

Re: (subset) [PATCH v4 00/42] ep93xx device tree conversion

[Alexandre Belloni]

On Fri, 15 Sep 2023 11:10:42 +0300, Nikita Shubin wrote:
> This series aims to convert ep93xx from platform to full device tree support.
> 
> The main goal is to receive ACK's to take it via Arnd's arm-soc branch.
> 
> Major changes:
> - drop newline at the end from each YAML files
> - rename dma and clk bindings headers to match first compatible
> - shrink SoC exported functions number to only 2
> - dropped some ep93xx_pata fixes from these series
> - dropped m48t86 stuff from these series
> 
> [...]

Applied, thanks!

[13/42] dt-bindings: rtc: Add Cirrus EP93xx
        commit: 207bddd97881913bcb8bef84737c0971e712fbee
[14/42] rtc: ep93xx: add DT support for Cirrus EP93xx
        commit: 1d70f9fe5f1c8fbd5d838223b8aec27c69a7e609

Best regards,

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com