From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0002189]: No sound on speakers, low volume on the headphones, Packard bell V7900
Date: Thu, 15 Jun 2006 20:25:33 +0200 [thread overview]
Message-ID: <b0c5df06bfabc99f41c134111edb1771@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2189>
======================================================================
Reported By: bettored
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 2189
Category: PCI - hda-intel
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution:
Kernel Version: 2.6.15-23-386
======================================================================
Date Submitted: 06-07-2006 19:47 CEST
Last Modified: 06-15-2006 20:25 CEST
======================================================================
Summary: No sound on speakers, low volume on the headphones,
Packard bell V7900
Description:
Hi,
I have a Packard Bell with a soundcard Realtek ALC260 HD Audio, with Intel
hda-intel, with problems.
I have no sound on speakers and very low on the headphones.
In the alsamixer all is on.
Recently i actualized to Alsa 1.0.11 but with same problem.
In the Volumen Control, i have two:
1. HDA intel (alsa mixer)
2. Realtek ALC260 (oss mixer)
And it is correct.
Here leave same test:
janek@janek-laptop:~$ lsmod | grep snd
snd_hda_intel 19348 2
snd_hda_codec 143152 1 snd_hda_intel
snd_pcm_oss 43936 0
snd_mixer_oss 18944 2 snd_pcm_oss
snd_pcm 89352 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 25348 1 snd_pcm
snd 55396 8
snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixe r_oss,snd_pcm,snd_timer
soundcore 10208 2 snd
snd_page_alloc 10760 2 snd_hda_intel,snd_pcm
--------------------------------------------------------------------------------
janek@janek-laptop:~$ lspci
0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub
(rev 03)
0000:00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Graphics
Port (rev 03)
0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 (rev 02)
0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 2 (rev 02)
0000:00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 3 (rev 02)
0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 4 (rev 02)
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev
e2)
0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus
Controller (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown
device 71c5
0000:03:00.0 Network controller: Intel Corporation: Unknown device 4222
(rev 02)
0000:06:02.0 FireWire (IEEE 1394): O2 Micro, Inc.: Unknown device 00f7
(rev 02)
0000:06:02.2 0805: O2 Micro, Inc.: Unknown device 7120 (rev 01)
0000:06:02.3 Mass storage controller: O2 Micro, Inc.: Unknown device 7130
(rev 01)
0000:06:08.0 Ethernet controller: Intel Corporation: Unknown device 1092
(rev 02)
-------------------------------------------------------------------------------
janek@janek-laptop:~$ modinfo soundcore
filename: /lib/modules/2.6.15-23-386/kernel/sound/soundcore.ko
description: Core sound module
author: Alan Cox
license: GPL
alias: char-major-14-*
vermagic: 2.6.15-23-386 preempt 486 gcc-4.0
depends:
srcversion: DD426F1CCA2CC5F060F6F92
---------------------------------------------------------------------------
Thanks for your time
======================================================================
----------------------------------------------------------------------
bonobo - 06-15-06 20:25
----------------------------------------------------------------------
I have the same problem with PB easynote v7900.
Maybe the following can help.
Here's the content of my /proc/asound/card0/codec#0 file :
=================================================================
Codec: Realtek ALC260
Address: 0
Vendor Id: 0x10ec0260
Subsystem Id: 0x16311635
Revision Id: 0x100400
Default PCM: rates 0x560, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x11: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x03 [Audio Output] wcaps 0x211: Stereo Digital
PCM: rates 0x560, bits 0x1e, types 0x1
Node 0x04 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: [0x1c 0x1c] [0x1c 0x1c] [0x1c 0x1c] [0x1c 0x1c] [0x1c
0x1c] [0x1c 0x1c] [0x1c 0x1c]
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 7
0x12* 0x13 0x14 0x15 0x16 0x0f 0x10
Node 0x05 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 8
0x12* 0x13 0x14 0x15 0x16 0x07 0x0f 0x10
Node 0x06 [Audio Input] wcaps 0x100391: Stereo Digital
PCM: rates 0x160, bits 0x1e, types 0x1
Connection: 1
0x19
Node 0x07 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x39
0x39] [0xa3 0xa3] [0xa3 0xa3] [0xa3 0xa3]
Connection: 8
0x12 0x13 0x14 0x15 0x16 0x17 0x0f 0x10
Node 0x08 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x30 0x30]
Connection: 2
0x02 0x07
Node 0x09 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x02 0x07
Node 0x0a [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00] [0x00]
Amp-Out caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=0
Amp-Out vals: [0x00]
Connection: 2
0x02 0x07
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x08* 0x09
Node 0x0c [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x08* 0x09
Node 0x0d [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x08* 0x09
Node 0x0e [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x08* 0x09
Node 0x0f [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081003f: IN OUT HP
Pin Default 0x01014110: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x08
Node 0x10 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x081003f: IN OUT HP
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 1
0x09
Node 0x11 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x0a
Node 0x12 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP
Pin Default 0x01a19930: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 1
0x0b
Node 0x13 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 1
0x0c
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP
Pin Default 0x01813131: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 1
0x0d
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08133f: IN OUT HP
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 1
0x0e
Node 0x16 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x99330132: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x00:
Node 0x17 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x9983013e: [Fixed] Line In at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x00:
Node 0x18 [Pin Complex] wcaps 0x400380: Mono Digital
Pincap 0x0814: OUT
Pin Default 0x01454120: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Green
Pin-ctls: 0x00:
Connection: 1
0x03
Node 0x19 [Pin Complex] wcaps 0x400280: Mono Digital
Pincap 0x0824: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Node 0x1a [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x1b [Volume Knob Widget] wcaps 0x600080: Mono
====================================================================
Thank you
Issue History
Date Modified Username Field Change
======================================================================
06-07-06 19:47 bettored New Issue
06-07-06 19:47 bettored Kernel Version => 2.6.15-23-386
06-15-06 20:25 bonobo Note Added: 0010243
======================================================================
next reply other threads:[~2006-06-15 18:25 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-15 18:25 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-07-26 15:48 [ALSA - driver 0002189]: No sound on speakers, low volume on the headphones, Packard bell V7900 bugtrack
2006-07-19 15:29 bugtrack
2006-07-01 11:46 bugtrack
2006-06-25 19:37 bugtrack
2006-06-25 12:03 bugtrack
2006-06-21 17:16 bugtrack
2006-06-21 17:02 bugtrack
2006-06-20 17:52 bugtrack
2006-06-18 21:59 bugtrack
2006-06-07 17:47 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b0c5df06bfabc99f41c134111edb1771@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox