From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0002189]: No sound on speakers, low volume on the headphones, Packard bell V7900
Date: Wed, 26 Jul 2006 17:48:40 +0200 [thread overview]
Message-ID: <b1161d3f329c88d5fef2ee71bd3e1ca0@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2189>
======================================================================
Reported By: bettored
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 2189
Category: PCI - hda-intel
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution:
Kernel Version: 2.6.15-23-386
======================================================================
Date Submitted: 06-07-2006 19:47 CEST
Last Modified: 07-26-2006 17:48 CEST
======================================================================
Summary: No sound on speakers, low volume on the headphones,
Packard bell V7900
Description:
Hi,
I have a Packard Bell with a soundcard Realtek ALC260 HD Audio, with Intel
hda-intel, with problems.
I have no sound on speakers and very low on the headphones.
In the alsamixer all is on.
Recently i actualized to Alsa 1.0.11 but with same problem.
In the Volumen Control, i have two:
1. HDA intel (alsa mixer)
2. Realtek ALC260 (oss mixer)
And it is correct.
Here leave same test:
janek@janek-laptop:~$ lsmod | grep snd
snd_hda_intel 19348 2
snd_hda_codec 143152 1 snd_hda_intel
snd_pcm_oss 43936 0
snd_mixer_oss 18944 2 snd_pcm_oss
snd_pcm 89352 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 25348 1 snd_pcm
snd 55396 8
snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixe r_oss,snd_pcm,snd_timer
soundcore 10208 2 snd
snd_page_alloc 10760 2 snd_hda_intel,snd_pcm
--------------------------------------------------------------------------------
janek@janek-laptop:~$ lspci
0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub
(rev 03)
0000:00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Graphics
Port (rev 03)
0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 (rev 02)
0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 2 (rev 02)
0000:00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 3 (rev 02)
0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 4 (rev 02)
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev
e2)
0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus
Controller (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown
device 71c5
0000:03:00.0 Network controller: Intel Corporation: Unknown device 4222
(rev 02)
0000:06:02.0 FireWire (IEEE 1394): O2 Micro, Inc.: Unknown device 00f7
(rev 02)
0000:06:02.2 0805: O2 Micro, Inc.: Unknown device 7120 (rev 01)
0000:06:02.3 Mass storage controller: O2 Micro, Inc.: Unknown device 7130
(rev 01)
0000:06:08.0 Ethernet controller: Intel Corporation: Unknown device 1092
(rev 02)
-------------------------------------------------------------------------------
janek@janek-laptop:~$ modinfo soundcore
filename: /lib/modules/2.6.15-23-386/kernel/sound/soundcore.ko
description: Core sound module
author: Alan Cox
license: GPL
alias: char-major-14-*
vermagic: 2.6.15-23-386 preempt 486 gcc-4.0
depends:
srcversion: DD426F1CCA2CC5F060F6F92
---------------------------------------------------------------------------
Thanks for your time
======================================================================
----------------------------------------------------------------------
urdle - 07-25-06 18:38
----------------------------------------------------------------------
I have the same issue with my PB easynote v7907 : No sound at all, except a
very very weak output (almost inaudible) through S/PDIF when playing an
audio CD.
I use alsa1.11
I tried with an USB HeadSet, and it worked perfectly... In fact it was
even too loud. I did that test to check that my alsa installation was
working fine. So Alsa is working, but not on the notebook speakers nor at
an audible level through S/PDIF.
----------------------------------------------------------------------
adrian_r - 07-26-06 17:48
----------------------------------------------------------------------
I would like to report the same problem on a Packard Bell Easynote V7912,
with Ubuntu Dapper. I also installed alsa 1.0.12rc1 and tried all the
hda_intel models but without any success. I tried changing switches and
settings with the hda_intel test model, but didn't manage to improve on
the barely audible sound on the headphones (I have only tested with
desktop sound events and with some I can
hear a faint sound of something, and with others not).
Thank you
Adrian.
Issue History
Date Modified Username Field Change
======================================================================
06-07-06 19:47 bettored New Issue
06-07-06 19:47 bettored Kernel Version => 2.6.15-23-386
06-15-06 20:25 bonobo Note Added: 0010243
06-15-06 20:32 bonobo Note Edited: 0010243
06-18-06 23:59 ixM Note Added: 0010304
06-20-06 19:52 tiwai Note Added: 0010350
06-21-06 19:02 ixM Note Added: 0010402
06-21-06 19:16 tiwai Note Added: 0010403
06-22-06 23:18 urdle Issue Monitored: urdle
06-25-06 14:02 bonobo Note Added: 0010507
06-25-06 21:37 bonobo Note Added: 0010519
07-01-06 13:46 bonobo Note Added: 0010761
07-19-06 17:29 urdle Note Added: 0011089
07-25-06 18:38 urdle Note Edited: 0011089
07-26-06 17:48 adrian_r Note Added: 0011250
======================================================================
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
next reply other threads:[~2006-07-26 15:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-26 15:48 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-07-19 15:29 [ALSA - driver 0002189]: No sound on speakers, low volume on the headphones, Packard bell V7900 bugtrack
2006-07-01 11:46 bugtrack
2006-06-25 19:37 bugtrack
2006-06-25 12:03 bugtrack
2006-06-21 17:16 bugtrack
2006-06-21 17:02 bugtrack
2006-06-20 17:52 bugtrack
2006-06-18 21:59 bugtrack
2006-06-15 18:25 bugtrack
2006-06-07 17:47 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b1161d3f329c88d5fef2ee71bd3e1ca0@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox