* [ALSA - driver 0000337]: "alsactl restore" always fails
@ 2004-06-16 20:04 noreply
0 siblings, 0 replies; 7+ messages in thread
From: noreply @ 2004-06-16 20:04 UTC (permalink / raw)
To: alsa-devel
The following bug has been SUBMITTED.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000337
======================================================================
Reported By: kuulasma
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Bug ID: 337
Category: PCI - nm256
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: Debian sarge
Kernel Version: Linux 2.6.6-1-686
======================================================================
Date Submitted: 06-16-2004 22:04 CEST
Last Modified: 06-16-2004 22:04 CEST
======================================================================
Summary: "alsactl restore" always fails
Description:
Dell Latitude CPt with an NM256ZX fails always to restore previously saved
state. Command "alsactl store" succesfully stores current state but
"alsactl restore" always fails to restore previous state. The OSS driver
works fine.
Example:
----------------------------------------------------------
# alsactl restore
alsactl: set_control:966: Cannot write control '2:0:0:CD Playback
Switch:0' : Invalid argument
----------------------------------------------------------
======================================================================
Bug History
Date Modified Username Field Change
======================================================================
06-16-04 22:04 kuulasma New Bug
06-16-04 22:04 kuulasma Distribution => Debian sarge
06-16-04 22:04 kuulasma Kernel Version => Linux 2.6.6-1-686
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference
Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer
Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA
REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000337]: "alsactl restore" always fails
@ 2004-06-22 16:51 noreply
0 siblings, 0 replies; 7+ messages in thread
From: noreply @ 2004-06-22 16:51 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000337
======================================================================
Reported By: kuulasma
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Bug ID: 337
Category: PCI - nm256
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: Debian sarge
Kernel Version: Linux 2.6.6-1-686
======================================================================
Date Submitted: 06-16-2004 22:04 CEST
Last Modified: 06-22-2004 18:51 CEST
======================================================================
Summary: "alsactl restore" always fails
Description:
Dell Latitude CPt with an NM256ZX fails always to restore previously saved
state. Command "alsactl store" succesfully stores current state but
"alsactl restore" always fails to restore previous state. The OSS driver
works fine.
Example:
----------------------------------------------------------
# alsactl restore
alsactl: set_control:966: Cannot write control '2:0:0:CD Playback
Switch:0' : Invalid argument
----------------------------------------------------------
======================================================================
----------------------------------------------------------------------
tiwai - 06-22-2004 18:51 CEST
----------------------------------------------------------------------
Can you toggle CD mute on alsamixer, or like 'amixer set CD mute'?
Bug History
Date Modified Username Field Change
======================================================================
06-16-04 22:04 kuulasma New Bug
06-16-04 22:04 kuulasma Distribution => Debian sarge
06-16-04 22:04 kuulasma Kernel Version => Linux 2.6.6-1-686
06-17-04 14:12 kuulasma Bug Monitored: kuulasma
06-22-04 18:51 tiwai Bugnote Added: 0001333
======================================================================
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000337]: "alsactl restore" always fails
@ 2004-06-22 19:35 noreply
0 siblings, 0 replies; 7+ messages in thread
From: noreply @ 2004-06-22 19:35 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000337
======================================================================
Reported By: kuulasma
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Bug ID: 337
Category: PCI - nm256
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: Debian sarge
Kernel Version: Linux 2.6.6-1-686
======================================================================
Date Submitted: 06-16-2004 22:04 CEST
Last Modified: 06-22-2004 21:35 CEST
======================================================================
Summary: "alsactl restore" always fails
Description:
Dell Latitude CPt with an NM256ZX fails always to restore previously saved
state. Command "alsactl store" succesfully stores current state but
"alsactl restore" always fails to restore previous state. The OSS driver
works fine.
Example:
----------------------------------------------------------
# alsactl restore
alsactl: set_control:966: Cannot write control '2:0:0:CD Playback
Switch:0' : Invalid argument
----------------------------------------------------------
======================================================================
----------------------------------------------------------------------
tiwai - 06-22-2004 18:51 CEST
----------------------------------------------------------------------
Can you toggle CD mute on alsamixer, or like 'amixer set CD mute'?
----------------------------------------------------------------------
kuulasma - 06-22-2004 21:35 CEST
----------------------------------------------------------------------
I tried to toggle CD mute but new setting are not stored. If I try to mute
CD or change volyme, new settings are ignored. alsamixer doesn't save CD
volyme and mute state. Other controls work just like I expect them to
work. Once I open alsamixer CD settings are as follows: volyme 100 and
unmuted.
If I edit /var/lib/alsa/asound.state file manually and remove sections
control.14 and control.15, I can issue command 'alsactl restore'
succesfully (without error message). But once I store settings ('alsactl
store'), illegal control.14 and control.15 are stored in asound.state
file.
Just in case you need following information:
# lsmod | grep snd
snd_nm256 69188 1
snd_ac97_codec 65188 1 snd_nm256
snd_pcm_oss 54436 0
snd_mixer_oss 20096 2 snd_pcm_oss
snd_pcm 98148 2 snd_nm256,snd_pcm_oss
snd_page_alloc 11460 1 snd_pcm
snd_timer 25380 1 snd_pcm
snd 54692 6
snd_nm256,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10336 2 snd
Bug History
Date Modified Username Field Change
======================================================================
06-16-04 22:04 kuulasma New Bug
06-16-04 22:04 kuulasma Distribution => Debian sarge
06-16-04 22:04 kuulasma Kernel Version => Linux 2.6.6-1-686
06-17-04 14:12 kuulasma Bug Monitored: kuulasma
06-22-04 18:51 tiwai Bugnote Added: 0001333
06-22-04 21:35 kuulasma Bugnote Added: 0001334
======================================================================
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
^ permalink raw reply [flat|nested] 7+ messages in thread* [ALSA - driver 0000337]: "alsactl restore" always fails
@ 2004-06-30 14:29 noreply
0 siblings, 0 replies; 7+ messages in thread
From: noreply @ 2004-06-30 14:29 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000337
======================================================================
Reported By: kuulasma
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Bug ID: 337
Category: PCI - nm256
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: Debian sarge
Kernel Version: Linux 2.6.6-1-686
======================================================================
Date Submitted: 06-16-2004 22:04 CEST
Last Modified: 06-30-2004 16:29 CEST
======================================================================
Summary: "alsactl restore" always fails
Description:
Dell Latitude CPt with an NM256ZX fails always to restore previously saved
state. Command "alsactl store" succesfully stores current state but
"alsactl restore" always fails to restore previous state. The OSS driver
works fine.
Example:
----------------------------------------------------------
# alsactl restore
alsactl: set_control:966: Cannot write control '2:0:0:CD Playback
Switch:0' : Invalid argument
----------------------------------------------------------
======================================================================
----------------------------------------------------------------------
tiwai - 06-22-2004 18:51 CEST
----------------------------------------------------------------------
Can you toggle CD mute on alsamixer, or like 'amixer set CD mute'?
----------------------------------------------------------------------
kuulasma - 06-22-2004 21:35 CEST
----------------------------------------------------------------------
I tried to toggle CD mute but new setting are not stored. If I try to mute
CD or change volyme, new settings are ignored. alsamixer doesn't save CD
volyme and mute state. Other controls work just like I expect them to
work. Once I open alsamixer CD settings are as follows: volyme 100 and
unmuted.
If I edit /var/lib/alsa/asound.state file manually and remove sections
control.14 and control.15, I can issue command 'alsactl restore'
succesfully (without error message). But once I store settings ('alsactl
store'), illegal control.14 and control.15 are stored in asound.state
file.
Just in case you need following information:
# lsmod | grep snd
snd_nm256 69188 1
snd_ac97_codec 65188 1 snd_nm256
snd_pcm_oss 54436 0
snd_mixer_oss 20096 2 snd_pcm_oss
snd_pcm 98148 2 snd_nm256,snd_pcm_oss
snd_page_alloc 11460 1 snd_pcm
snd_timer 25380 1 snd_pcm
snd 54692 6
snd_nm256,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10336 2 snd
----------------------------------------------------------------------
tiwai - 06-30-2004 16:29 CEST
----------------------------------------------------------------------
The attached patch will allow the access to the CD mute/volume.
Please give a try.
Bug History
Date Modified Username Field Change
======================================================================
06-16-04 22:04 kuulasma New Bug
06-16-04 22:04 kuulasma Distribution => Debian sarge
06-16-04 22:04 kuulasma Kernel Version => Linux 2.6.6-1-686
06-17-04 14:12 kuulasma Bug Monitored: kuulasma
06-22-04 18:51 tiwai Bugnote Added: 0001333
06-22-04 21:35 kuulasma Bugnote Added: 0001334
06-30-04 16:29 tiwai Bugnote Added: 0001355
======================================================================
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
^ permalink raw reply [flat|nested] 7+ messages in thread* [ALSA - driver 0000337]: "alsactl restore" always fails
@ 2004-07-02 5:12 noreply
0 siblings, 0 replies; 7+ messages in thread
From: noreply @ 2004-07-02 5:12 UTC (permalink / raw)
To: alsa-devel
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000337
======================================================================
Reported By: kuulasma
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Bug ID: 337
Category: PCI - nm256
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: Debian sarge
Kernel Version: Linux 2.6.6-1-686
======================================================================
Date Submitted: 06-16-2004 22:04 CEST
Last Modified: 07-02-2004 07:12 CEST
======================================================================
Summary: "alsactl restore" always fails
Description:
Dell Latitude CPt with an NM256ZX fails always to restore previously saved
state. Command "alsactl store" succesfully stores current state but
"alsactl restore" always fails to restore previous state. The OSS driver
works fine.
Example:
----------------------------------------------------------
# alsactl restore
alsactl: set_control:966: Cannot write control '2:0:0:CD Playback
Switch:0' : Invalid argument
----------------------------------------------------------
======================================================================
----------------------------------------------------------------------
tiwai - 06-22-2004 18:51 CEST
----------------------------------------------------------------------
Can you toggle CD mute on alsamixer, or like 'amixer set CD mute'?
----------------------------------------------------------------------
kuulasma - 06-22-2004 21:35 CEST
----------------------------------------------------------------------
I tried to toggle CD mute but new setting are not stored. If I try to mute
CD or change volyme, new settings are ignored. alsamixer doesn't save CD
volyme and mute state. Other controls work just like I expect them to
work. Once I open alsamixer CD settings are as follows: volyme 100 and
unmuted.
If I edit /var/lib/alsa/asound.state file manually and remove sections
control.14 and control.15, I can issue command 'alsactl restore'
succesfully (without error message). But once I store settings ('alsactl
store'), illegal control.14 and control.15 are stored in asound.state
file.
Just in case you need following information:
# lsmod | grep snd
snd_nm256 69188 1
snd_ac97_codec 65188 1 snd_nm256
snd_pcm_oss 54436 0
snd_mixer_oss 20096 2 snd_pcm_oss
snd_pcm 98148 2 snd_nm256,snd_pcm_oss
snd_page_alloc 11460 1 snd_pcm
snd_timer 25380 1 snd_pcm
snd 54692 6
snd_nm256,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10336 2 snd
----------------------------------------------------------------------
tiwai - 06-30-2004 16:29 CEST
----------------------------------------------------------------------
The attached patch will allow the access to the CD mute/volume.
Please give a try.
----------------------------------------------------------------------
kuulasma - 07-02-2004 07:12 CEST
----------------------------------------------------------------------
YES!
I patched the kernel (2.6.6) and compiled. After boot new kernel with
nm256-cd.diff worked. Thank you!
When will the patch land in official kernel source repository?
Regards
Teemu
Bug History
Date Modified Username Field Change
======================================================================
06-16-04 22:04 kuulasma New Bug
06-16-04 22:04 kuulasma Distribution => Debian sarge
06-16-04 22:04 kuulasma Kernel Version => Linux 2.6.6-1-686
06-17-04 14:12 kuulasma Bug Monitored: kuulasma
06-22-04 18:51 tiwai Bugnote Added: 0001333
06-22-04 21:35 kuulasma Bugnote Added: 0001334
06-30-04 16:29 tiwai Bugnote Added: 0001355
06-30-04 16:30 tiwai File Added: nm256-cd.dif
07-02-04 07:12 kuulasma Bugnote Added: 0001373
======================================================================
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
^ permalink raw reply [flat|nested] 7+ messages in thread* [ALSA - driver 0000337]: "alsactl restore" always fails
@ 2004-07-16 10:02 noreply
0 siblings, 0 replies; 7+ messages in thread
From: noreply @ 2004-07-16 10:02 UTC (permalink / raw)
To: alsa-devel
The following bug has been RESOLVED.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000337
======================================================================
Reported By: kuulasma
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Bug ID: 337
Category: PCI - nm256
Reproducibility: always
Severity: major
Priority: normal
Status: resolved
Distribution: Debian sarge
Kernel Version: Linux 2.6.6-1-686
Resolution: fixed
======================================================================
Date Submitted: 06-16-2004 22:04 CEST
Last Modified: 07-16-2004 12:02 CEST
======================================================================
Summary: "alsactl restore" always fails
Description:
Dell Latitude CPt with an NM256ZX fails always to restore previously saved
state. Command "alsactl store" succesfully stores current state but
"alsactl restore" always fails to restore previous state. The OSS driver
works fine.
Example:
----------------------------------------------------------
# alsactl restore
alsactl: set_control:966: Cannot write control '2:0:0:CD Playback
Switch:0' : Invalid argument
----------------------------------------------------------
======================================================================
----------------------------------------------------------------------
tiwai - 06-22-2004 18:51 CEST
----------------------------------------------------------------------
Can you toggle CD mute on alsamixer, or like 'amixer set CD mute'?
----------------------------------------------------------------------
kuulasma - 06-22-2004 21:35 CEST
----------------------------------------------------------------------
I tried to toggle CD mute but new setting are not stored. If I try to mute
CD or change volyme, new settings are ignored. alsamixer doesn't save CD
volyme and mute state. Other controls work just like I expect them to
work. Once I open alsamixer CD settings are as follows: volyme 100 and
unmuted.
If I edit /var/lib/alsa/asound.state file manually and remove sections
control.14 and control.15, I can issue command 'alsactl restore'
succesfully (without error message). But once I store settings ('alsactl
store'), illegal control.14 and control.15 are stored in asound.state
file.
Just in case you need following information:
# lsmod | grep snd
snd_nm256 69188 1
snd_ac97_codec 65188 1 snd_nm256
snd_pcm_oss 54436 0
snd_mixer_oss 20096 2 snd_pcm_oss
snd_pcm 98148 2 snd_nm256,snd_pcm_oss
snd_page_alloc 11460 1 snd_pcm
snd_timer 25380 1 snd_pcm
snd 54692 6
snd_nm256,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10336 2 snd
----------------------------------------------------------------------
tiwai - 06-30-2004 16:29 CEST
----------------------------------------------------------------------
The attached patch will allow the access to the CD mute/volume.
Please give a try.
----------------------------------------------------------------------
kuulasma - 07-02-2004 07:12 CEST
----------------------------------------------------------------------
YES!
I patched the kernel (2.6.6) and compiled. After boot new kernel with
nm256-cd.diff worked. Thank you!
When will the patch land in official kernel source repository?
Regards
Teemu
----------------------------------------------------------------------
tiwai - 07-16-2004 12:02 CEST
----------------------------------------------------------------------
fixed on cvs now.
Bug History
Date Modified Username Field Change
======================================================================
06-16-04 22:04 kuulasma New Bug
06-16-04 22:04 kuulasma Distribution => Debian sarge
06-16-04 22:04 kuulasma Kernel Version => Linux 2.6.6-1-686
06-17-04 14:12 kuulasma Bug Monitored: kuulasma
06-22-04 18:51 tiwai Bugnote Added: 0001333
06-22-04 21:35 kuulasma Bugnote Added: 0001334
06-30-04 16:29 tiwai Bugnote Added: 0001355
06-30-04 16:30 tiwai File Added: nm256-cd.dif
07-02-04 07:12 kuulasma Bugnote Added: 0001373
07-16-04 12:02 tiwai Bugnote Added: 0001444
07-16-04 12:02 tiwai Resolution open => fixed
07-16-04 12:02 tiwai Status assigned => resolved
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread* [ALSA - driver 0000337]: "alsactl restore" always fails
@ 2004-09-24 11:40 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2004-09-24 11:40 UTC (permalink / raw)
To: alsa-devel
The following bug has been CLOSED
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000337
======================================================================
Reported By: kuulasma
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Bug ID: 337
Category: PCI - nm256
Reproducibility: always
Severity: major
Priority: normal
Status: closed
Distribution: Debian sarge
Kernel Version: Linux 2.6.6-1-686
======================================================================
Date Submitted: 06-16-2004 22:04 CEST
Last Modified: 09-24-2004 13:40 CEST
======================================================================
Summary: "alsactl restore" always fails
Description:
Dell Latitude CPt with an NM256ZX fails always to restore previously saved
state. Command "alsactl store" succesfully stores current state but
"alsactl restore" always fails to restore previous state. The OSS driver
works fine.
Example:
----------------------------------------------------------
# alsactl restore
alsactl: set_control:966: Cannot write control '2:0:0:CD Playback
Switch:0' : Invalid argument
----------------------------------------------------------
======================================================================
----------------------------------------------------------------------
tiwai - 06-22-2004 18:51 CEST
----------------------------------------------------------------------
Can you toggle CD mute on alsamixer, or like 'amixer set CD mute'?
----------------------------------------------------------------------
kuulasma - 06-22-2004 21:35 CEST
----------------------------------------------------------------------
I tried to toggle CD mute but new setting are not stored. If I try to mute
CD or change volyme, new settings are ignored. alsamixer doesn't save CD
volyme and mute state. Other controls work just like I expect them to
work. Once I open alsamixer CD settings are as follows: volyme 100 and
unmuted.
If I edit /var/lib/alsa/asound.state file manually and remove sections
control.14 and control.15, I can issue command 'alsactl restore'
succesfully (without error message). But once I store settings ('alsactl
store'), illegal control.14 and control.15 are stored in asound.state
file.
Just in case you need following information:
# lsmod | grep snd
snd_nm256 69188 1
snd_ac97_codec 65188 1 snd_nm256
snd_pcm_oss 54436 0
snd_mixer_oss 20096 2 snd_pcm_oss
snd_pcm 98148 2 snd_nm256,snd_pcm_oss
snd_page_alloc 11460 1 snd_pcm
snd_timer 25380 1 snd_pcm
snd 54692 6
snd_nm256,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10336 2 snd
----------------------------------------------------------------------
tiwai - 06-30-2004 16:29 CEST
----------------------------------------------------------------------
The attached patch will allow the access to the CD mute/volume.
Please give a try.
----------------------------------------------------------------------
kuulasma - 07-02-2004 07:12 CEST
----------------------------------------------------------------------
YES!
I patched the kernel (2.6.6) and compiled. After boot new kernel with
nm256-cd.diff worked. Thank you!
When will the patch land in official kernel source repository?
Regards
Teemu
----------------------------------------------------------------------
tiwai - 07-16-2004 12:02 CEST
----------------------------------------------------------------------
fixed on cvs now.
Bug History
Date Modified Username Field Change
======================================================================
06-16-04 22:04 kuulasma New Bug
06-16-04 22:04 kuulasma Distribution => Debian sarge
06-16-04 22:04 kuulasma Kernel Version => Linux 2.6.6-1-686
06-17-04 14:12 kuulasma Bug Monitored: kuulasma
06-22-04 18:51 tiwai Bugnote Added: 0001333
06-22-04 21:35 kuulasma Bugnote Added: 0001334
06-30-04 16:29 tiwai Bugnote Added: 0001355
06-30-04 16:30 tiwai File Added: nm256-cd.dif
07-02-04 07:12 kuulasma Bugnote Added: 0001373
07-16-04 12:02 tiwai Bugnote Added: 0001444
07-16-04 12:02 tiwai Resolution open => fixed
07-16-04 12:02 tiwai Status assigned => resolved
09-24-04 13:40 tiwai Status resolved => closed
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2004-09-24 11:40 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-16 20:04 [ALSA - driver 0000337]: "alsactl restore" always fails noreply
-- strict thread matches above, loose matches on Subject: below --
2004-06-22 16:51 noreply
2004-06-22 19:35 noreply
2004-06-30 14:29 noreply
2004-07-02 5:12 noreply
2004-07-16 10:02 noreply
2004-09-24 11:40 bugtrack
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox