Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: Cezary Rojewski <cezary.rojewski@intel.com>,
	alsa-devel@alsa-project.org,  tiwai@suse.com
Cc: hdegoede@redhat.com, broonie@kernel.org,
	amadeuszx.slawinski@linux.intel.com
Subject: Re: [PATCH] ALSA: hda: Do not unset preset when cleaning up codec
Date: Tue, 17 Jan 2023 09:48:19 -0600	[thread overview]
Message-ID: <c4c5c2b6-7a73-eea0-e249-73441a6434d7@linux.intel.com> (raw)
In-Reply-To: <20230117154734.950487-1-cezary.rojewski@intel.com>



On 1/17/23 09:47, Cezary Rojewski wrote:
> Several functions that take part in codec's initialization and removal
> are re-used by ASoC codec drivers implementations. Drivers mimic the
> behavior of hda_codec_driver_probe/remove() found in
> sound/pci/hda/hda_bind.c with their component->probe/remove() instead.
> 
> One of the reasons for that is the expectation of
> snd_hda_codec_device_new() to receive a valid struct snd_card pointer
> what cannot be fulfilled on ASoC side until a card is attempted to be

very hard to follow.
Is there a spurious 'what' to be removed?
Or is there missing text?
Please consider rewording with simpler sentences.

> bound and its component probing is triggered.
> 
> As ASoC sound card may be unbound without codec device being actually
> removed from the system, unsetting ->preset in 
> snd_hda_codec_cleanup_for_unbind() interferes with module unload -> load
> scenario causing null-ptr-deref. Preset is assigned only once, during
> device/driver matching whereas ASoC codec driver's module reloading may
> occur several times throughout the lifetime of an audio stack.
> 
> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
> ---
> 
> This is a continuation of a discussion that begun in the middle of 2022
> [1] and was part of a larger series addressing several HDAudio topics.
> 
> Single rmmod on ASoC's codec driver module is enough to cause a panic.
> Given our results, no regression shows up with modprobe/rmmod on
> snd_hda_intel side with this patch applied.
> 
> [1]: https://lore.kernel.org/alsa-devel/20220706120230.427296-2-cezary.rojewski@intel.com/
> 
>  sound/pci/hda/hda_codec.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
> index edd653ece70d..ac1cc7c5290e 100644
> --- a/sound/pci/hda/hda_codec.c
> +++ b/sound/pci/hda/hda_codec.c
> @@ -795,7 +795,6 @@ void snd_hda_codec_cleanup_for_unbind(struct hda_codec *codec)
>  	snd_array_free(&codec->cvt_setups);
>  	snd_array_free(&codec->spdif_out);
>  	snd_array_free(&codec->verbs);
> -	codec->preset = NULL;
>  	codec->follower_dig_outs = NULL;
>  	codec->spdif_status_reset = 0;
>  	snd_array_free(&codec->mixers);

  reply	other threads:[~2023-01-17 15:49 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-17 15:47 [PATCH] ALSA: hda: Do not unset preset when cleaning up codec Cezary Rojewski
2023-01-17 15:48 ` Pierre-Louis Bossart [this message]
2023-01-18 11:38   ` Cezary Rojewski
2023-01-18 11:47     ` Cezary Rojewski
2023-01-17 16:01 ` Takashi Iwai
2023-01-18 12:04   ` Cezary Rojewski
2023-01-18 12:32     ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c4c5c2b6-7a73-eea0-e249-73441a6434d7@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=amadeuszx.slawinski@linux.intel.com \
    --cc=broonie@kernel.org \
    --cc=cezary.rojewski@intel.com \
    --cc=hdegoede@redhat.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox