From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001316]: can't run mixer to adjusting volumes / no sound
Date: Mon, 5 Sep 2005 13:48:53 +0200 [thread overview]
Message-ID: <d7218d2a52029b602a44335bdd76ede2@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1316>
======================================================================
Reported By: boris
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 1316
Category: PCI - hda-intel
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: Debian stable
Kernel Version: 2.6.13-rc5-git3
======================================================================
Date Submitted: 08-06-2005 11:11 CEST
Last Modified: 09-05-2005 13:48 CEST
======================================================================
Summary: can't run mixer to adjusting volumes / no sound
Description:
When I try to run alsamixer it fails with:
alsamixer: function snd_mixer_load failed: Invalid argument
running ogg123 seems to work ...
running aumix over oss-emu only shows a view controls
which have no effect -> no sound
This happened with 2.6.13-rc[3,5]-git?.
2.6.12-rc5-git8 (for example) works.
HW: Aopen 915gmm-hfs.
======================================================================
----------------------------------------------------------------------
boris - 08-17-05 15:39
----------------------------------------------------------------------
With cvs from 15.08.05 (kernel 2.6.13-rc6) problem is gone.
----------------------------------------------------------------------
imre - 09-05-05 13:48
----------------------------------------------------------------------
I've got the same problem, no sound.
Kernel version: 2.6.13-git4
alsa version: v1.0.10rc1
hardware: Clevo M400A
root@eridanus:~# alsamixer
alsamixer: function snd_mixer_load failed: Invalid argument
root@eridanus:~# cat /dev/snd/controlC0
cat: /dev/snd/controlC0: File descriptor in bad state
root@eridanus:~#
lspci -vvn
0000:00:1b.0 0403: 8086:2668 (rev 04)
Subsystem: 1558:04a0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at c0000000 (64-bit, non-prefetchable)
[size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] #10 [0091]
dmesg:
ALSA sound/pci/hda/hda_intel.c:1074: azx_pcm_prepare: bufsize=0xc030,
fragsize=0x6018, format=0x11
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0x7,
stream=0x1, channel=0, format=0x11
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0x7,
stream=0x0, channel=0, format=0x0
ALSA sound/pci/hda/hda_intel.c:1074: azx_pcm_prepare: bufsize=0x10000,
fragsize=0x1000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0x6,
stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0xfffe,
stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0x1,
stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0xffff,
stream=0x5, channel=0, format=0x4011
hda_codec: num_steps = 0 for NID=0xb
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0xfffe,
stream=0x0, channel=0, format=0x0
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0x1,
stream=0x0, channel=0, format=0x0
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0xffff,
stream=0x0, channel=0, format=0x0
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0x6,
stream=0x0, channel=0, format=0x0
hda_codec: num_steps = 0 for NID=0xb
The kernel version 2.6.12-rc5-git8 works, with a low quality sound.
Issue History
Date Modified Username Field Change
======================================================================
08-06-05 11:11 boris New Issue
08-06-05 11:11 boris Distribution => Debian stable
08-06-05 11:11 boris Kernel Version => 2.6.13-rc5-git3
08-17-05 15:39 boris Note Added: 0005837
08-18-05 10:41 pshou Issue Monitored: pshou
09-05-05 13:18 imre Issue Monitored: imre
09-05-05 13:48 imre Note Added: 0006040
======================================================================
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
next reply other threads:[~2005-09-05 11:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-05 11:48 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-12-20 0:09 [ALSA - driver 0001316]: can't run mixer to adjusting volumes / no sound bugtrack
2005-11-23 19:33 bugtrack
2005-09-26 17:14 bugtrack
2005-08-17 13:39 bugtrack
2005-08-06 9:11 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d7218d2a52029b602a44335bdd76ede2@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox