From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001316]: can't run mixer to adjusting volumes / no sound
Date: Wed, 23 Nov 2005 20:33:55 +0100 [thread overview]
Message-ID: <db4dbb72db7efb852940f0104232e68b@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1316>
======================================================================
Reported By: boris
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 1316
Category: PCI - hda-intel
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: Debian stable
Kernel Version: 2.6.13-rc5-git3
======================================================================
Date Submitted: 08-06-2005 11:11 CEST
Last Modified: 11-23-2005 20:33 CET
======================================================================
Summary: can't run mixer to adjusting volumes / no sound
Description:
When I try to run alsamixer it fails with:
alsamixer: function snd_mixer_load failed: Invalid argument
running ogg123 seems to work ...
running aumix over oss-emu only shows a view controls
which have no effect -> no sound
This happened with 2.6.13-rc[3,5]-git?.
2.6.12-rc5-git8 (for example) works.
HW: Aopen 915gmm-hfs.
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
duplicate of 0001429 hda_codec: Unknown model for ALC880
======================================================================
----------------------------------------------------------------------
imre - 09-05-05 13:48
----------------------------------------------------------------------
I've got the same problem, no sound.
Kernel version: 2.6.13-git4
alsa version: v1.0.10rc1
hardware: Clevo M400A
root@eridanus:~# alsamixer
alsamixer: function snd_mixer_load failed: Invalid argument
root@eridanus:~# cat /dev/snd/controlC0
cat: /dev/snd/controlC0: File descriptor in bad state
root@eridanus:~#
lspci -vvn
0000:00:1b.0 0403: 8086:2668 (rev 04)
Subsystem: 1558:04a0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at c0000000 (64-bit, non-prefetchable)
[size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] #10 [0091]
dmesg:
ALSA sound/pci/hda/hda_intel.c:1074: azx_pcm_prepare: bufsize=0xc030,
fragsize=0x6018, format=0x11
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0x7,
stream=0x1, channel=0, format=0x11
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0x7,
stream=0x0, channel=0, format=0x0
ALSA sound/pci/hda/hda_intel.c:1074: azx_pcm_prepare: bufsize=0x10000,
fragsize=0x1000, format=0x4011
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0x6,
stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0xfffe,
stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0x1,
stream=0x5, channel=0, format=0x4011
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0xffff,
stream=0x5, channel=0, format=0x4011
hda_codec: num_steps = 0 for NID=0xb
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0xfffe,
stream=0x0, channel=0, format=0x0
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0x1,
stream=0x0, channel=0, format=0x0
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0xffff,
stream=0x0, channel=0, format=0x0
ALSA sound/pci/hda/hda_codec.c:560: hda_codec_setup_stream: NID=0x6,
stream=0x0, channel=0, format=0x0
hda_codec: num_steps = 0 for NID=0xb
The kernel version 2.6.12-rc5-git8 works, with a low quality sound.
----------------------------------------------------------------------
rlrevell - 11-23-05 20:33
----------------------------------------------------------------------
Possibly fixed in CVS. See the patch from bug #1563.
Issue History
Date Modified Username Field Change
======================================================================
08-06-05 11:11 boris New Issue
08-06-05 11:11 boris Distribution => Debian stable
08-06-05 11:11 boris Kernel Version => 2.6.13-rc5-git3
08-17-05 15:39 boris Note Added: 0005837
08-18-05 10:41 pshou Issue Monitored: pshou
09-05-05 13:18 imre Issue Monitored: imre
09-05-05 13:48 imre Note Added: 0006040
09-26-05 19:14 rlrevell Relationship added duplicate of 0001429
11-23-05 20:33 rlrevell Note Added: 0006829
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
next reply other threads:[~2005-11-23 19:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-23 19:33 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-12-20 0:09 [ALSA - driver 0001316]: can't run mixer to adjusting volumes / no sound bugtrack
2005-09-26 17:14 bugtrack
2005-09-05 11:48 bugtrack
2005-08-17 13:39 bugtrack
2005-08-06 9:11 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=db4dbb72db7efb852940f0104232e68b@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox