From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001793]: No sound on ASUS A8N-VM CSM
Date: Mon, 6 Feb 2006 20:16:52 +0100 [thread overview]
Message-ID: <d886945120fc32b0be8998f7241af2ec@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1793>
======================================================================
Reported By: labene
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 1793
Category: PCI - hda-intel
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: Debian
Kernel Version: 2.6.15 standard
======================================================================
Date Submitted: 01-29-2006 18:31 CET
Last Modified: 02-06-2006 20:16 CET
======================================================================
Summary: No sound on ASUS A8N-VM CSM
Description:
No sound on ASUS A8N-VM CSM, chipset nForce 430 (HDA nvidia) don't have
sound on the speaker but found by kernel 2.6.15 and exist with alsamixer
!
I don't any issue in the line :
options snd-hda-intel model=???? position_fix=1
I don't know where is the problem !
cat /proc/asound/cards :
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfebd8000 irq 5
lspci -nv :
0000:00:00.0 0500: 10de:02f0 (rev a2)
Subsystem: 10de:cb84
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <available only to root>
0000:00:00.1 0500: 10de:02fa (rev a2)
Subsystem: 10de:cb84
Flags: 66MHz, fast devsel
0000:00:00.2 0500: 10de:02fe (rev a2)
Subsystem: 10de:cb84
Flags: 66MHz, fast devsel
0000:00:00.3 0500: 10de:02f8 (rev a2)
Subsystem: 10de:cb84
Flags: 66MHz, fast devsel
0000:00:00.4 0500: 10de:02f9 (rev a2)
Subsystem: 10de:cb84
Flags: bus master, 66MHz, fast devsel, latency 0
0000:00:00.5 0500: 10de:02ff (rev a2)
Subsystem: 10de:cb84
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <available only to root>
0000:00:00.6 0500: 10de:027f (rev a2)
Subsystem: 10de:cb84
Flags: 66MHz, fast devsel
0000:00:00.7 0500: 10de:027e (rev a2)
Subsystem: 10de:cb84
Flags: 66MHz, fast devsel
0000:00:02.0 0604: 10de:02fc (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: <available only to root>
0000:00:03.0 0604: 10de:02fd (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: <available only to root>
0000:00:04.0 0604: 10de:02fb (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: <available only to root>
0000:00:05.0 0300: 10de:0240 (rev a2)
Subsystem: 10de:cb84
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at febe0000 [disabled] [size=128K]
Capabilities: <available only to root>
0000:00:09.0 0500: 10de:0270 (rev a2)
Subsystem: 10de:cb84
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <available only to root>
0000:00:0a.0 0601: 10de:0260 (rev a2)
Subsystem: 10de:cb84
Flags: bus master, 66MHz, fast devsel, latency 0
0000:00:0a.1 0c05: 10de:0264 (rev a2)
Subsystem: 10de:cb84
Flags: 66MHz, fast devsel, IRQ 5
I/O ports at 0600 [size=64]
I/O ports at 0700 [size=64]
Capabilities: <available only to root>
0000:00:0b.0 0c03: 10de:026d (rev a2) (prog-if 10)
Subsystem: 10de:cb84
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
Memory at febde000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:0b.1 0c03: 10de:026e (rev a2) (prog-if 20)
Subsystem: 10de:cb84
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 3
Memory at febdfc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:00:0d.0 0101: 10de:0265 (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: 10de:cb84
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at ffa0 [size=16]
Capabilities: <available only to root>
0000:00:0e.0 0101: 10de:0266 (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: 10de:cb84
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
I/O ports at e800 [size=8]
I/O ports at e480 [size=4]
I/O ports at e400 [size=8]
I/O ports at e080 [size=4]
I/O ports at e000 [size=16]
Memory at febdd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:0f.0 0101: 10de:0267 (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: 10de:cb84
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
I/O ports at dc00 [size=8]
I/O ports at d880 [size=4]
I/O ports at d800 [size=8]
I/O ports at d480 [size=4]
I/O ports at d400 [size=16]
Memory at febdc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:10.0 0604: 10de:026f (rev a2) (prog-if 01)
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=128
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: faa00000-faafffff
Capabilities: <available only to root>
0000:00:10.1 0403: 10de:026c (rev a2)
Subsystem: 10de:cb84
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
Memory at febd8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <available only to root>
0000:00:18.0 0600: 1022:1100
Flags: fast devsel
Capabilities: <available only to root>
0000:00:18.1 0600: 1022:1101
Flags: fast devsel
0000:00:18.2 0600: 1022:1102
Flags: fast devsel
0000:00:18.3 0600: 1022:1103
Flags: fast devsel
0000:04:05.0 0c00: 1106:3044 (rev 80) (prog-if 10)
Subsystem: 1043:808a
Flags: bus master, medium devsel, latency 128, IRQ 5
Memory at faaff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at cc00 [size=128]
Capabilities: <available only to root>
0000:04:08.0 0200: 10ec:8139 (rev 10)
Subsystem: 10ec:8139
Flags: bus master, medium devsel, latency 128, IRQ 5
I/O ports at c800 [size=256]
Memory at faaff400 (32-bit, non-prefetchable) [size=256]
======================================================================
----------------------------------------------------------------------
gerick - 02-05-06 06:26
----------------------------------------------------------------------
RE: the patch
It was my understanding that the patch disables surround sound (5.1) and
gives only stereo. So it is a work around only, not a solutions.
----------------------------------------------------------------------
quagga - 02-06-06 20:16
----------------------------------------------------------------------
gerick is correct. From my understanding of the patch listed on my site,
it kills surround sound in favor of getting sound working. Sorry, I
didn't submit it here as well, its not really a solution and the issues
that this patch works around were already listed as bugs so I didn't want
to be a "me too" guy.
I had been following
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1678 and just
figured I'd wait and see how things developed.
As of 1.0.11rc3, I still have issues with the board. I don't get the
squeeling from the speaker but I start out with sound only coming from my
right headphone (left is dead), and if I try to adjust the volume, the
whole card silences.
Issue History
Date Modified Username Field Change
======================================================================
01-29-06 18:31 labene New Issue
01-29-06 18:31 labene Distribution => Debian
01-29-06 18:31 labene Kernel Version => 2.6.15 standard
01-29-06 18:54 labene Note Added: 0007833
01-29-06 19:13 labene Note Added: 0007834
02-01-06 15:38 thorstenl Issue Monitored: thorstenl
02-04-06 02:20 rbenech Issue Monitored: rbenech
02-04-06 02:23 rbenech Note Added: 0007909
02-04-06 02:28 rbenech Note Edited: 0007909
02-04-06 15:36 labene Note Added: 0007916
02-04-06 15:44 labene Note Edited: 0007916
02-04-06 19:15 rlrevell Note Added: 0007920
02-04-06 20:23 Arnaud Patard Note Added: 0007924
02-05-06 06:26 gerick Note Added: 0007931
02-05-06 06:32 gerick Issue Monitored: gerick
02-06-06 20:16 quagga Note Added: 0007951
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
next reply other threads:[~2006-02-06 19:16 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-06 19:16 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-03-23 16:42 [ALSA - driver 0001793]: No sound on ASUS A8N-VM CSM bugtrack
2006-03-17 16:42 bugtrack
2006-03-15 17:27 bugtrack
2006-03-15 16:53 bugtrack
2006-03-15 16:05 bugtrack
2006-03-15 14:54 bugtrack
2006-03-15 14:40 bugtrack
2006-03-15 13:50 bugtrack
2006-03-13 22:19 bugtrack
2006-03-13 16:56 bugtrack
2006-03-13 16:50 bugtrack
2006-03-13 16:39 bugtrack
2006-03-01 12:09 bugtrack
2006-02-13 14:02 bugtrack
2006-02-13 13:00 bugtrack
2006-02-05 5:26 bugtrack
2006-02-04 19:23 bugtrack
2006-02-04 18:15 bugtrack
2006-02-04 14:36 bugtrack
2006-02-04 1:23 bugtrack
2006-01-29 18:13 bugtrack
2006-01-29 17:54 bugtrack
2006-01-29 17:31 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d886945120fc32b0be8998f7241af2ec@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox