From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - utils 0001326]: ISA cards (opl3sa2 in particular) are not detected properly on 2.6 kernels
Date: Fri, 12 Aug 2005 16:44:39 +0200 [thread overview]
Message-ID: <da42f0f2b0fee6460b1e293791af0c47@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1326>
======================================================================
Reported By: ahaning
Assigned To: perex
======================================================================
Project: ALSA - utils
Issue ID: 1326
Category: alsaconf
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 08-10-2005 03:39 CEST
Last Modified: 08-12-2005 16:44 CEST
======================================================================
Summary: ISA cards (opl3sa2 in particular) are not detected
properly on 2.6 kernels
Description:
When brute-force detecting my OPL3SA2 card, the IRQ and DMA1/DMA2 settings
are incorrectly detected by alsaconf from alsa-utils. For example, the
default BIOS settings are IRQ=11, DMA1=0, DMA2=1, but alsaconf detects
IRQ=5, DMA1=1, DMA2=0. No matter the BIOS settings, alsaconf always
detects those settings (IRQ=5, DMA1=1, DMA2=0). If I set the BIOS settings
to that, then the card will make sound (after touching the mixer while
playing audio).
According to perex (author of the opl3sa2 driver):
"The alsaconf tries to gather free resources (irq/dma/ports) from the
/proc filesystem. It might be extended to gather this information also
from /sys filesystem."
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
related to 0000879 (snd_)opl3sa2 (isa) doesn't work (fails...
======================================================================
----------------------------------------------------------------------
perex - 08-12-05 16:08
----------------------------------------------------------------------
Okay, I got it. The pnpbios lists this device as:
NMX2210
state = active
io 0x220-0x22f
io 0x530-0x537
io 0x388-0x38f
io 0x330-0x331
io 0x370-0x371
irq 7
dma 0
dma 1
We need to add support for these devices to snd-opl3sa module and for
other ISA modules. And yes, the bug
http://bugzilla.kernel.org/show_bug.cgi?id=4561 is definitely related.
Actually ALSA drivers support only ISA PnP devices not BIOS PnP devices.
----------------------------------------------------------------------
ahaning - 08-12-05 16:44
----------------------------------------------------------------------
I installed Windows XP on the machine a while back just for fun. (It's a
P2-300 with 192MB of RAM...not XP-friendly)
Windows detected the card "out of the box". I guess the driver could have
been provided to Microsoft by Yamaha or NeoMagic or whomever. My point is
that I installed no drivers, so the driver is the one that is normally
included with Windows XP.
I'll try tawai's suggestion for shits and giggles.
Issue History
Date Modified Username Field Change
======================================================================
08-10-05 03:39 ahaning New Issue
08-10-05 03:39 ahaning Distribution => Slackware 9.1 (but
it's not distribution-specific)
08-10-05 03:39 ahaning Kernel Version => 2.6.12.2
08-10-05 13:26 perex Status new => assigned
08-10-05 13:26 perex Assigned To => perex
08-10-05 13:26 perex File Added: alsaconf
08-10-05 13:28 perex Note Added: 0005747
08-10-05 13:29 perex Project ALSA - driver => ALSA -
utils
08-10-05 13:30 perex Relationship added related to 0000879
08-10-05 13:31 perex Category 1_OTHERS => alsaconf
08-10-05 14:55 ahaning Note Added: 0005748
08-11-05 00:24 ahaning Note Added: 0005752
08-11-05 23:59 ahaning Note Added: 0005763
08-12-05 00:00 ahaning Note Edited: 0005763
08-12-05 03:09 ahaning Note Added: 0005764
08-12-05 09:29 perex Note Added: 0005766
08-12-05 12:54 ahaning Note Added: 0005767
08-12-05 15:11 perex Summary ISAPNP cards (opl3sa2 in
particular) are not detected properly on 2.6 kernels => ISA cards (opl3sa2 in
particular) are not detected properly on 2.6 kernels
08-12-05 15:14 perex Note Added: 0005768
08-12-05 15:35 tiwai Note Added: 0005769
08-12-05 15:36 ahaning Note Added: 0005770
08-12-05 15:44 tiwai Note Added: 0005771
08-12-05 15:45 tiwai Note Added: 0005772
08-12-05 15:56 perex Note Added: 0005777
08-12-05 16:08 perex Note Added: 0005778
08-12-05 16:44 ahaning Note Added: 0005782
======================================================================
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
next reply other threads:[~2005-08-12 14:44 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-12 14:44 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-08-23 12:32 [ALSA - utils 0001326]: ISA cards (opl3sa2 in particular) are not detected properly on 2.6 kernels bugtrack
2005-08-23 3:19 bugtrack
2005-08-22 13:18 bugtrack
2005-08-22 10:32 bugtrack
2005-08-19 2:51 bugtrack
2005-08-19 1:02 bugtrack
2005-08-19 0:35 bugtrack
2005-08-18 14:36 bugtrack
2005-08-18 10:56 bugtrack
2005-08-18 10:51 bugtrack
2005-08-15 11:55 bugtrack
2005-08-13 17:06 bugtrack
2005-08-13 13:11 bugtrack
2005-08-12 16:52 bugtrack
2005-08-12 16:03 bugtrack
2005-08-12 14:08 bugtrack
2005-08-12 13:56 bugtrack
2005-08-12 13:45 bugtrack
2005-08-12 13:44 bugtrack
2005-08-12 13:36 bugtrack
2005-08-12 13:35 bugtrack
2005-08-12 13:14 bugtrack
2005-08-12 13:11 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=da42f0f2b0fee6460b1e293791af0c47@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox