From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - utils 0001326]: ISA cards (opl3sa2 in particular) are not detected properly on 2.6 kernels
Date: Fri, 12 Aug 2005 15:45:02 +0200 [thread overview]
Message-ID: <eb3adfd44be743e31dd63a649ff7bd17@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1326>
======================================================================
Reported By: ahaning
Assigned To: perex
======================================================================
Project: ALSA - utils
Issue ID: 1326
Category: alsaconf
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 08-10-2005 03:39 CEST
Last Modified: 08-12-2005 15:45 CEST
======================================================================
Summary: ISA cards (opl3sa2 in particular) are not detected
properly on 2.6 kernels
Description:
When brute-force detecting my OPL3SA2 card, the IRQ and DMA1/DMA2 settings
are incorrectly detected by alsaconf from alsa-utils. For example, the
default BIOS settings are IRQ=11, DMA1=0, DMA2=1, but alsaconf detects
IRQ=5, DMA1=1, DMA2=0. No matter the BIOS settings, alsaconf always
detects those settings (IRQ=5, DMA1=1, DMA2=0). If I set the BIOS settings
to that, then the card will make sound (after touching the mixer while
playing audio).
According to perex (author of the opl3sa2 driver):
"The alsaconf tries to gather free resources (irq/dma/ports) from the
/proc filesystem. It might be extended to gather this information also
from /sys filesystem."
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
related to 0000879 (snd_)opl3sa2 (isa) doesn't work (fails...
======================================================================
----------------------------------------------------------------------
tiwai - 08-12-05 15:44
----------------------------------------------------------------------
Try to comment out snd_card_set_isa_pm_callback() in snd_opl3sa2_probe() in
opl3sa2.c and see whether the error mesasge regarding snd_generic_pm()
disappears.
----------------------------------------------------------------------
tiwai - 08-12-05 15:45
----------------------------------------------------------------------
.. and do NOT define any module parameters in /etc/modprobe.conf or
whatever. And do just "modprobe snd-opl3sa2".
Issue History
Date Modified Username Field Change
======================================================================
08-10-05 03:39 ahaning New Issue
08-10-05 03:39 ahaning Distribution => Slackware 9.1 (but
it's not distribution-specific)
08-10-05 03:39 ahaning Kernel Version => 2.6.12.2
08-10-05 13:26 perex Status new => assigned
08-10-05 13:26 perex Assigned To => perex
08-10-05 13:26 perex File Added: alsaconf
08-10-05 13:28 perex Note Added: 0005747
08-10-05 13:29 perex Project ALSA - driver => ALSA -
utils
08-10-05 13:30 perex Relationship added related to 0000879
08-10-05 13:31 perex Category 1_OTHERS => alsaconf
08-10-05 14:55 ahaning Note Added: 0005748
08-11-05 00:24 ahaning Note Added: 0005752
08-11-05 23:59 ahaning Note Added: 0005763
08-12-05 00:00 ahaning Note Edited: 0005763
08-12-05 03:09 ahaning Note Added: 0005764
08-12-05 09:29 perex Note Added: 0005766
08-12-05 12:54 ahaning Note Added: 0005767
08-12-05 15:11 perex Summary ISAPNP cards (opl3sa2 in
particular) are not detected properly on 2.6 kernels => ISA cards (opl3sa2 in
particular) are not detected properly on 2.6 kernels
08-12-05 15:14 perex Note Added: 0005768
08-12-05 15:35 tiwai Note Added: 0005769
08-12-05 15:36 ahaning Note Added: 0005770
08-12-05 15:44 tiwai Note Added: 0005771
08-12-05 15:45 tiwai Note Added: 0005772
======================================================================
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
next reply other threads:[~2005-08-12 13:45 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-12 13:45 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-08-23 12:32 [ALSA - utils 0001326]: ISA cards (opl3sa2 in particular) are not detected properly on 2.6 kernels bugtrack
2005-08-23 3:19 bugtrack
2005-08-22 13:18 bugtrack
2005-08-22 10:32 bugtrack
2005-08-19 2:51 bugtrack
2005-08-19 1:02 bugtrack
2005-08-19 0:35 bugtrack
2005-08-18 14:36 bugtrack
2005-08-18 10:56 bugtrack
2005-08-18 10:51 bugtrack
2005-08-15 11:55 bugtrack
2005-08-13 17:06 bugtrack
2005-08-13 13:11 bugtrack
2005-08-12 16:52 bugtrack
2005-08-12 16:03 bugtrack
2005-08-12 14:44 bugtrack
2005-08-12 14:08 bugtrack
2005-08-12 13:56 bugtrack
2005-08-12 13:44 bugtrack
2005-08-12 13:36 bugtrack
2005-08-12 13:35 bugtrack
2005-08-12 13:14 bugtrack
2005-08-12 13:11 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=eb3adfd44be743e31dd63a649ff7bd17@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox