* [ALSA - driver 0000902]: Some channels not working
@ 2005-02-25 11:44 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-02-25 11:44 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=902>
======================================================================
Reported By: slammer
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 902
Category: PCI - intel8x0
Reproducibility: have not tried
Severity: major
Priority: normal
Status: new
Distribution: Slackware
Kernel Version: 2.6.11-rc2
======================================================================
Date Submitted: 02-12-2005 00:02 CET
Last Modified: 02-25-2005 12:44 CET
======================================================================
Summary: Some channels not working
Description:
I wanted to get my Creative Inspire 5300 5.1 analog surround speaker set
working with my souncard working on linux.
I use speaker-test for testing the speakers under linux. I have to add
that they're working fine in Windows (tested each speaker using nvMixer).
I have two independent sockets for LFE/Center and Rear channels (they're
not shared with Mic and Line in as in some other products e.g. Epox
8RDA+).
I've noticed that the surround51 pcm defined in
/usr/share/alsa/NFORCE.conf does some routing on the stream - namely swaps
LFE/Center with rear channels and that seems right, because hw:0,0 tested
by speaker-test plays them incorrectly. So when doing my test, creating
own pcms and else I had it on my mind.
However what this bug report is all about is that I can't get any sound
playing from the first channel through anything connected to the socket
originally (according to the MoBo manual) used for LFE/Center neither
using the surround51 nor hw:0,0 pcm. I also tried to make my own pcm but
the diagnosis is the
same.
Here are the facts:
My speakers connected just the way they work in Windows.
$speaker-test -c6 -Dsurround51
Playback device is surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 3 to 5461
Period size range from 3 to 5461
Periods = 4
Buffer time size 2525
To choose buffer_size = 5460
To choose period_size = 1365
was set period_size = 1365
was set buffer_size = 5460
0 - Front Left # I hear the beep correctly from correct
speaker
4 - Center # I hear the beep correctly from correct
speaker
1 - Front Right # I hear the beep correctly from correct
speaker
3 - Rear Right # No sound ;(((
2 - Rear Left # I hear the beep correctly from correct
speaker
5 - LFE # I hear the beep correctly from correct
speaker (yes it's quiet, but I''m sure it comes from the Subwoofer only)
When I create my own pcm that reroutes the 3rd channel to some other - it
plays from the position where routed, but nothing ever gets played from
that muted channel when routed there - hence my diagnosis.
When I use hw:0,0 the situation's the same except the LFE/Center and Rear
sockets are swapped, as stated before.
Moreover if I turn the switches "Mic as Center" and "Line-in as surround"
"on" to use it the Epox way, and plug my jacks where stated, the case is
similar but even worse, since it won't play ANY of the first channels
(i.e. Rear Right and LFE from surround51 pcm) at both sockets. Second
channels (Center and Rear Left) work just fine.
Or maybe it has something to do with settings for capture, because I
haven't used it and played with it at all? Let me know if they can affect
it and if so, I think there should be some notice somewhere (on the
module's istalation manual), because I couldn't find any.
Additionally when tried to play with the "Swap surround slot" option there
was a thought of another may-be-issue that came to me. Namely when i turn
the option "on" and physically do the swap, the "Duplicate Front" option
duplicates front channels still to the Unswapped plug i.e. I hear the
channels through the Center/LFE channels. I think that the "Duplicate
front" switch should be affected by the "Swap surround" switch. Don't You
think so?
I'm in a dead end right now and quite desperate. I also am interested in
making Linux work on more hardware!
======================================================================
----------------------------------------------------------------------
slammer - 02-25-05 12:44
----------------------------------------------------------------------
I checked it on my friend's machine (same hardware) and it seems the same,
so I guess it's reproducible.
Issue History
Date Modified Username Field Change
======================================================================
02-12-05 00:02 slammer New Issue
02-12-05 00:02 slammer Distribution => Slackware
02-12-05 00:02 slammer Kernel Version => 2.6.11-rc2
02-12-05 00:43 slammer Issue Monitored: slammer
02-25-05 12:44 slammer Note Added: 0003733
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000902]: Some channels not working
@ 2005-02-28 20:51 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-02-28 20:51 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=902>
======================================================================
Reported By: slammer
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 902
Category: PCI - intel8x0
Reproducibility: have not tried
Severity: major
Priority: normal
Status: new
Distribution: Slackware
Kernel Version: 2.6.11-rc2
======================================================================
Date Submitted: 02-12-2005 00:02 CET
Last Modified: 02-28-2005 21:51 CET
======================================================================
Summary: Some channels not working
Description:
I wanted to get my Creative Inspire 5300 5.1 analog surround speaker set
working with my souncard working on linux.
I use speaker-test for testing the speakers under linux. I have to add
that they're working fine in Windows (tested each speaker using nvMixer).
I have two independent sockets for LFE/Center and Rear channels (they're
not shared with Mic and Line in as in some other products e.g. Epox
8RDA+).
I've noticed that the surround51 pcm defined in
/usr/share/alsa/NFORCE.conf does some routing on the stream - namely swaps
LFE/Center with rear channels and that seems right, because hw:0,0 tested
by speaker-test plays them incorrectly. So when doing my test, creating
own pcms and else I had it on my mind.
However what this bug report is all about is that I can't get any sound
playing from the first channel through anything connected to the socket
originally (according to the MoBo manual) used for LFE/Center neither
using the surround51 nor hw:0,0 pcm. I also tried to make my own pcm but
the diagnosis is the
same.
Here are the facts:
My speakers connected just the way they work in Windows.
$speaker-test -c6 -Dsurround51
Playback device is surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 3 to 5461
Period size range from 3 to 5461
Periods = 4
Buffer time size 2525
To choose buffer_size = 5460
To choose period_size = 1365
was set period_size = 1365
was set buffer_size = 5460
0 - Front Left # I hear the beep correctly from correct
speaker
4 - Center # I hear the beep correctly from correct
speaker
1 - Front Right # I hear the beep correctly from correct
speaker
3 - Rear Right # No sound ;(((
2 - Rear Left # I hear the beep correctly from correct
speaker
5 - LFE # I hear the beep correctly from correct
speaker (yes it's quiet, but I''m sure it comes from the Subwoofer only)
When I create my own pcm that reroutes the 3rd channel to some other - it
plays from the position where routed, but nothing ever gets played from
that muted channel when routed there - hence my diagnosis.
When I use hw:0,0 the situation's the same except the LFE/Center and Rear
sockets are swapped, as stated before.
Moreover if I turn the switches "Mic as Center" and "Line-in as surround"
"on" to use it the Epox way, and plug my jacks where stated, the case is
similar but even worse, since it won't play ANY of the first channels
(i.e. Rear Right and LFE from surround51 pcm) at both sockets. Second
channels (Center and Rear Left) work just fine.
Or maybe it has something to do with settings for capture, because I
haven't used it and played with it at all? Let me know if they can affect
it and if so, I think there should be some notice somewhere (on the
module's istalation manual), because I couldn't find any.
Additionally when tried to play with the "Swap surround slot" option there
was a thought of another may-be-issue that came to me. Namely when i turn
the option "on" and physically do the swap, the "Duplicate Front" option
duplicates front channels still to the Unswapped plug i.e. I hear the
channels through the Center/LFE channels. I think that the "Duplicate
front" switch should be affected by the "Swap surround" switch. Don't You
think so?
I'm in a dead end right now and quite desperate. I also am interested in
making Linux work on more hardware!
======================================================================
----------------------------------------------------------------------
slammer - 02-25-05 12:44
----------------------------------------------------------------------
I checked it on my friend's machine (same hardware) and it seems the same,
so I guess it's reproducible.
----------------------------------------------------------------------
slammer - 02-28-05 21:51
----------------------------------------------------------------------
Opps... My friend switched from Slackware to Suse and the problem's gone.
He can hear all the channels. Hmmm :/ Does anyone have the idea where to
investigate on this?
Issue History
Date Modified Username Field Change
======================================================================
02-12-05 00:02 slammer New Issue
02-12-05 00:02 slammer Distribution => Slackware
02-12-05 00:02 slammer Kernel Version => 2.6.11-rc2
02-12-05 00:43 slammer Issue Monitored: slammer
02-25-05 12:44 slammer Note Added: 0003733
02-28-05 21:51 slammer Note Added: 0003750
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000902]: Some channels not working
@ 2005-03-03 19:07 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-03-03 19:07 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=902>
======================================================================
Reported By: slammer
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 902
Category: PCI - intel8x0
Reproducibility: have not tried
Severity: major
Priority: normal
Status: new
Distribution: Slackware
Kernel Version: 2.6.11-rc2
======================================================================
Date Submitted: 02-12-2005 00:02 CET
Last Modified: 03-03-2005 20:07 CET
======================================================================
Summary: Some channels not working
Description:
I wanted to get my Creative Inspire 5300 5.1 analog surround speaker set
working with my souncard working on linux.
I use speaker-test for testing the speakers under linux. I have to add
that they're working fine in Windows (tested each speaker using nvMixer).
I have two independent sockets for LFE/Center and Rear channels (they're
not shared with Mic and Line in as in some other products e.g. Epox
8RDA+).
I've noticed that the surround51 pcm defined in
/usr/share/alsa/NFORCE.conf does some routing on the stream - namely swaps
LFE/Center with rear channels and that seems right, because hw:0,0 tested
by speaker-test plays them incorrectly. So when doing my test, creating
own pcms and else I had it on my mind.
However what this bug report is all about is that I can't get any sound
playing from the first channel through anything connected to the socket
originally (according to the MoBo manual) used for LFE/Center neither
using the surround51 nor hw:0,0 pcm. I also tried to make my own pcm but
the diagnosis is the
same.
Here are the facts:
My speakers connected just the way they work in Windows.
$speaker-test -c6 -Dsurround51
Playback device is surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 3 to 5461
Period size range from 3 to 5461
Periods = 4
Buffer time size 2525
To choose buffer_size = 5460
To choose period_size = 1365
was set period_size = 1365
was set buffer_size = 5460
0 - Front Left # I hear the beep correctly from correct
speaker
4 - Center # I hear the beep correctly from correct
speaker
1 - Front Right # I hear the beep correctly from correct
speaker
3 - Rear Right # No sound ;(((
2 - Rear Left # I hear the beep correctly from correct
speaker
5 - LFE # I hear the beep correctly from correct
speaker (yes it's quiet, but I''m sure it comes from the Subwoofer only)
When I create my own pcm that reroutes the 3rd channel to some other - it
plays from the position where routed, but nothing ever gets played from
that muted channel when routed there - hence my diagnosis.
When I use hw:0,0 the situation's the same except the LFE/Center and Rear
sockets are swapped, as stated before.
Moreover if I turn the switches "Mic as Center" and "Line-in as surround"
"on" to use it the Epox way, and plug my jacks where stated, the case is
similar but even worse, since it won't play ANY of the first channels
(i.e. Rear Right and LFE from surround51 pcm) at both sockets. Second
channels (Center and Rear Left) work just fine.
Or maybe it has something to do with settings for capture, because I
haven't used it and played with it at all? Let me know if they can affect
it and if so, I think there should be some notice somewhere (on the
module's istalation manual), because I couldn't find any.
Additionally when tried to play with the "Swap surround slot" option there
was a thought of another may-be-issue that came to me. Namely when i turn
the option "on" and physically do the swap, the "Duplicate Front" option
duplicates front channels still to the Unswapped plug i.e. I hear the
channels through the Center/LFE channels. I think that the "Duplicate
front" switch should be affected by the "Swap surround" switch. Don't You
think so?
I'm in a dead end right now and quite desperate. I also am interested in
making Linux work on more hardware!
======================================================================
----------------------------------------------------------------------
slammer - 02-28-05 21:51
----------------------------------------------------------------------
Opps... My friend switched from Slackware to Suse and the problem's gone.
He can hear all the channels. Hmmm :/ Does anyone have the idea where to
investigate on this?
----------------------------------------------------------------------
slammer - 03-03-05 20:07
----------------------------------------------------------------------
Hmm... that Suse is using 1.07rc1. Gotta check it.
Issue History
Date Modified Username Field Change
======================================================================
02-12-05 00:02 slammer New Issue
02-12-05 00:02 slammer Distribution => Slackware
02-12-05 00:02 slammer Kernel Version => 2.6.11-rc2
02-12-05 00:43 slammer Issue Monitored: slammer
02-25-05 12:44 slammer Note Added: 0003733
02-28-05 21:51 slammer Note Added: 0003750
03-03-05 20:07 slammer Note Added: 0003791
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000902]: Some channels not working
@ 2005-03-04 0:56 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-03-04 0:56 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=902>
======================================================================
Reported By: slammer
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 902
Category: PCI - intel8x0
Reproducibility: have not tried
Severity: major
Priority: normal
Status: new
Distribution: Slackware
Kernel Version: 2.6.11-rc2
======================================================================
Date Submitted: 02-12-2005 00:02 CET
Last Modified: 03-04-2005 01:56 CET
======================================================================
Summary: Some channels not working
Description:
I wanted to get my Creative Inspire 5300 5.1 analog surround speaker set
working with my souncard working on linux.
I use speaker-test for testing the speakers under linux. I have to add
that they're working fine in Windows (tested each speaker using nvMixer).
I have two independent sockets for LFE/Center and Rear channels (they're
not shared with Mic and Line in as in some other products e.g. Epox
8RDA+).
I've noticed that the surround51 pcm defined in
/usr/share/alsa/NFORCE.conf does some routing on the stream - namely swaps
LFE/Center with rear channels and that seems right, because hw:0,0 tested
by speaker-test plays them incorrectly. So when doing my test, creating
own pcms and else I had it on my mind.
However what this bug report is all about is that I can't get any sound
playing from the first channel through anything connected to the socket
originally (according to the MoBo manual) used for LFE/Center neither
using the surround51 nor hw:0,0 pcm. I also tried to make my own pcm but
the diagnosis is the
same.
Here are the facts:
My speakers connected just the way they work in Windows.
$speaker-test -c6 -Dsurround51
Playback device is surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 3 to 5461
Period size range from 3 to 5461
Periods = 4
Buffer time size 2525
To choose buffer_size = 5460
To choose period_size = 1365
was set period_size = 1365
was set buffer_size = 5460
0 - Front Left # I hear the beep correctly from correct
speaker
4 - Center # I hear the beep correctly from correct
speaker
1 - Front Right # I hear the beep correctly from correct
speaker
3 - Rear Right # No sound ;(((
2 - Rear Left # I hear the beep correctly from correct
speaker
5 - LFE # I hear the beep correctly from correct
speaker (yes it's quiet, but I''m sure it comes from the Subwoofer only)
When I create my own pcm that reroutes the 3rd channel to some other - it
plays from the position where routed, but nothing ever gets played from
that muted channel when routed there - hence my diagnosis.
When I use hw:0,0 the situation's the same except the LFE/Center and Rear
sockets are swapped, as stated before.
Moreover if I turn the switches "Mic as Center" and "Line-in as surround"
"on" to use it the Epox way, and plug my jacks where stated, the case is
similar but even worse, since it won't play ANY of the first channels
(i.e. Rear Right and LFE from surround51 pcm) at both sockets. Second
channels (Center and Rear Left) work just fine.
Or maybe it has something to do with settings for capture, because I
haven't used it and played with it at all? Let me know if they can affect
it and if so, I think there should be some notice somewhere (on the
module's istalation manual), because I couldn't find any.
Additionally when tried to play with the "Swap surround slot" option there
was a thought of another may-be-issue that came to me. Namely when i turn
the option "on" and physically do the swap, the "Duplicate Front" option
duplicates front channels still to the Unswapped plug i.e. I hear the
channels through the Center/LFE channels. I think that the "Duplicate
front" switch should be affected by the "Swap surround" switch. Don't You
think so?
I'm in a dead end right now and quite desperate. I also am interested in
making Linux work on more hardware!
======================================================================
----------------------------------------------------------------------
slammer - 03-03-05 20:07
----------------------------------------------------------------------
Hmm... that Suse is using 1.07rc1. Gotta check it.
----------------------------------------------------------------------
stephenv - 03-04-05 01:56
----------------------------------------------------------------------
This looks exactly like what is reported in 0000846. But so far, nothing
has been done to fix it. Think I am going to have to splurge on an
audigy2.
Issue History
Date Modified Username Field Change
======================================================================
02-12-05 00:02 slammer New Issue
02-12-05 00:02 slammer Distribution => Slackware
02-12-05 00:02 slammer Kernel Version => 2.6.11-rc2
02-12-05 00:43 slammer Issue Monitored: slammer
02-25-05 12:44 slammer Note Added: 0003733
02-28-05 21:51 slammer Note Added: 0003750
03-03-05 20:07 slammer Note Added: 0003791
03-04-05 01:56 stephenv Note Added: 0003794
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000902]: Some channels not working
@ 2005-03-10 12:20 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-03-10 12:20 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=902>
======================================================================
Reported By: slammer
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 902
Category: PCI - intel8x0
Reproducibility: have not tried
Severity: major
Priority: normal
Status: new
Distribution: Slackware
Kernel Version: 2.6.11-rc2
======================================================================
Date Submitted: 02-12-2005 00:02 CET
Last Modified: 03-10-2005 13:20 CET
======================================================================
Summary: Some channels not working
Description:
I wanted to get my Creative Inspire 5300 5.1 analog surround speaker set
working with my souncard working on linux.
I use speaker-test for testing the speakers under linux. I have to add
that they're working fine in Windows (tested each speaker using nvMixer).
I have two independent sockets for LFE/Center and Rear channels (they're
not shared with Mic and Line in as in some other products e.g. Epox
8RDA+).
I've noticed that the surround51 pcm defined in
/usr/share/alsa/NFORCE.conf does some routing on the stream - namely swaps
LFE/Center with rear channels and that seems right, because hw:0,0 tested
by speaker-test plays them incorrectly. So when doing my test, creating
own pcms and else I had it on my mind.
However what this bug report is all about is that I can't get any sound
playing from the first channel through anything connected to the socket
originally (according to the MoBo manual) used for LFE/Center neither
using the surround51 nor hw:0,0 pcm. I also tried to make my own pcm but
the diagnosis is the
same.
Here are the facts:
My speakers connected just the way they work in Windows.
$speaker-test -c6 -Dsurround51
Playback device is surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 3 to 5461
Period size range from 3 to 5461
Periods = 4
Buffer time size 2525
To choose buffer_size = 5460
To choose period_size = 1365
was set period_size = 1365
was set buffer_size = 5460
0 - Front Left # I hear the beep correctly from correct
speaker
4 - Center # I hear the beep correctly from correct
speaker
1 - Front Right # I hear the beep correctly from correct
speaker
3 - Rear Right # No sound ;(((
2 - Rear Left # I hear the beep correctly from correct
speaker
5 - LFE # I hear the beep correctly from correct
speaker (yes it's quiet, but I''m sure it comes from the Subwoofer only)
When I create my own pcm that reroutes the 3rd channel to some other - it
plays from the position where routed, but nothing ever gets played from
that muted channel when routed there - hence my diagnosis.
When I use hw:0,0 the situation's the same except the LFE/Center and Rear
sockets are swapped, as stated before.
Moreover if I turn the switches "Mic as Center" and "Line-in as surround"
"on" to use it the Epox way, and plug my jacks where stated, the case is
similar but even worse, since it won't play ANY of the first channels
(i.e. Rear Right and LFE from surround51 pcm) at both sockets. Second
channels (Center and Rear Left) work just fine.
Or maybe it has something to do with settings for capture, because I
haven't used it and played with it at all? Let me know if they can affect
it and if so, I think there should be some notice somewhere (on the
module's istalation manual), because I couldn't find any.
Additionally when tried to play with the "Swap surround slot" option there
was a thought of another may-be-issue that came to me. Namely when i turn
the option "on" and physically do the swap, the "Duplicate Front" option
duplicates front channels still to the Unswapped plug i.e. I hear the
channels through the Center/LFE channels. I think that the "Duplicate
front" switch should be affected by the "Swap surround" switch. Don't You
think so?
I'm in a dead end right now and quite desperate. I also am interested in
making Linux work on more hardware!
======================================================================
----------------------------------------------------------------------
stephenv - 03-04-05 01:56
----------------------------------------------------------------------
This looks exactly like what is reported in 0000846. But so far, nothing
has been done to fix it. Think I am going to have to splurge on an
audigy2.
----------------------------------------------------------------------
slammer - 03-10-05 13:20
----------------------------------------------------------------------
CVS version fixes the issue. And yes - I guess it's the same issue as
reported in 846
Thanks for your great job guys!
I realy appreciate what you're doing for the community!!!!
I'm planning to follow your example!
Issue History
Date Modified Username Field Change
======================================================================
02-12-05 00:02 slammer New Issue
02-12-05 00:02 slammer Distribution => Slackware
02-12-05 00:02 slammer Kernel Version => 2.6.11-rc2
02-12-05 00:43 slammer Issue Monitored: slammer
02-25-05 12:44 slammer Note Added: 0003733
02-28-05 21:51 slammer Note Added: 0003750
03-03-05 20:07 slammer Note Added: 0003791
03-04-05 01:56 stephenv Note Added: 0003794
03-06-05 13:31 slammer Note Edited: 0003791
03-10-05 13:20 slammer Note Added: 0003851
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000902]: Some channels not working
@ 2005-03-10 13:36 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-03-10 13:36 UTC (permalink / raw)
To: alsa-devel
The following issue has been RESOLVED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=902>
======================================================================
Reported By: slammer
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 902
Category: PCI - intel8x0
Reproducibility: have not tried
Severity: major
Priority: normal
Status: resolved
Distribution: Slackware
Kernel Version: 2.6.11-rc2
Resolution: duplicate
Duplicate: 846
Fixed in Version:
======================================================================
Date Submitted: 02-12-2005 00:02 CET
Last Modified: 03-10-2005 14:36 CET
======================================================================
Summary: Some channels not working
Description:
I wanted to get my Creative Inspire 5300 5.1 analog surround speaker set
working with my souncard working on linux.
I use speaker-test for testing the speakers under linux. I have to add
that they're working fine in Windows (tested each speaker using nvMixer).
I have two independent sockets for LFE/Center and Rear channels (they're
not shared with Mic and Line in as in some other products e.g. Epox
8RDA+).
I've noticed that the surround51 pcm defined in
/usr/share/alsa/NFORCE.conf does some routing on the stream - namely swaps
LFE/Center with rear channels and that seems right, because hw:0,0 tested
by speaker-test plays them incorrectly. So when doing my test, creating
own pcms and else I had it on my mind.
However what this bug report is all about is that I can't get any sound
playing from the first channel through anything connected to the socket
originally (according to the MoBo manual) used for LFE/Center neither
using the surround51 nor hw:0,0 pcm. I also tried to make my own pcm but
the diagnosis is the
same.
Here are the facts:
My speakers connected just the way they work in Windows.
$speaker-test -c6 -Dsurround51
Playback device is surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 3 to 5461
Period size range from 3 to 5461
Periods = 4
Buffer time size 2525
To choose buffer_size = 5460
To choose period_size = 1365
was set period_size = 1365
was set buffer_size = 5460
0 - Front Left # I hear the beep correctly from correct
speaker
4 - Center # I hear the beep correctly from correct
speaker
1 - Front Right # I hear the beep correctly from correct
speaker
3 - Rear Right # No sound ;(((
2 - Rear Left # I hear the beep correctly from correct
speaker
5 - LFE # I hear the beep correctly from correct
speaker (yes it's quiet, but I''m sure it comes from the Subwoofer only)
When I create my own pcm that reroutes the 3rd channel to some other - it
plays from the position where routed, but nothing ever gets played from
that muted channel when routed there - hence my diagnosis.
When I use hw:0,0 the situation's the same except the LFE/Center and Rear
sockets are swapped, as stated before.
Moreover if I turn the switches "Mic as Center" and "Line-in as surround"
"on" to use it the Epox way, and plug my jacks where stated, the case is
similar but even worse, since it won't play ANY of the first channels
(i.e. Rear Right and LFE from surround51 pcm) at both sockets. Second
channels (Center and Rear Left) work just fine.
Or maybe it has something to do with settings for capture, because I
haven't used it and played with it at all? Let me know if they can affect
it and if so, I think there should be some notice somewhere (on the
module's istalation manual), because I couldn't find any.
Additionally when tried to play with the "Swap surround slot" option there
was a thought of another may-be-issue that came to me. Namely when i turn
the option "on" and physically do the swap, the "Duplicate Front" option
duplicates front channels still to the Unswapped plug i.e. I hear the
channels through the Center/LFE channels. I think that the "Duplicate
front" switch should be affected by the "Swap surround" switch. Don't You
think so?
I'm in a dead end right now and quite desperate. I also am interested in
making Linux work on more hardware!
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
duplicate of 0000846 Can't hear sound from one of the surrou...
======================================================================
----------------------------------------------------------------------
stephenv - 03-04-05 01:56
----------------------------------------------------------------------
This looks exactly like what is reported in 0000846. But so far, nothing
has been done to fix it. Think I am going to have to splurge on an
audigy2.
----------------------------------------------------------------------
slammer - 03-10-05 13:20
----------------------------------------------------------------------
CVS version fixes the issue. And yes - I guess it's the same issue as
reported in 846
Thanks for your great job guys!
I realy appreciate what you're doing for the community!!!!
I'm planning to follow your example!
Issue History
Date Modified Username Field Change
======================================================================
02-12-05 00:02 slammer New Issue
02-12-05 00:02 slammer Distribution => Slackware
02-12-05 00:02 slammer Kernel Version => 2.6.11-rc2
02-12-05 00:43 slammer Issue Monitored: slammer
02-25-05 12:44 slammer Note Added: 0003733
02-28-05 21:51 slammer Note Added: 0003750
03-03-05 20:07 slammer Note Added: 0003791
03-04-05 01:56 stephenv Note Added: 0003794
03-06-05 13:31 slammer Note Edited: 0003791
03-10-05 13:20 slammer Note Added: 0003851
03-10-05 14:36 tiwai Relationship added duplicate of 0000846
03-10-05 14:36 tiwai Duplicate ID 0 => 846
03-10-05 14:36 tiwai Status new => resolved
03-10-05 14:36 tiwai Resolution open => duplicate
03-10-05 14:36 tiwai Assigned To => tiwai
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* [ALSA - driver 0000902]: Some channels not working
@ 2005-05-31 16:03 bugtrack
0 siblings, 0 replies; 7+ messages in thread
From: bugtrack @ 2005-05-31 16:03 UTC (permalink / raw)
To: alsa-devel
The following issue has been CLOSED
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=902>
======================================================================
Reported By: slammer
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 902
Category: PCI - intel8x0
Reproducibility: have not tried
Severity: major
Priority: normal
Status: closed
Distribution: Slackware
Kernel Version: 2.6.11-rc2
Resolution: duplicate
Duplicate: 846
Fixed in Version:
======================================================================
Date Submitted: 02-12-2005 00:02 CET
Last Modified: 05-31-2005 18:03 CEST
======================================================================
Summary: Some channels not working
Description:
I wanted to get my Creative Inspire 5300 5.1 analog surround speaker set
working with my souncard working on linux.
I use speaker-test for testing the speakers under linux. I have to add
that they're working fine in Windows (tested each speaker using nvMixer).
I have two independent sockets for LFE/Center and Rear channels (they're
not shared with Mic and Line in as in some other products e.g. Epox
8RDA+).
I've noticed that the surround51 pcm defined in
/usr/share/alsa/NFORCE.conf does some routing on the stream - namely swaps
LFE/Center with rear channels and that seems right, because hw:0,0 tested
by speaker-test plays them incorrectly. So when doing my test, creating
own pcms and else I had it on my mind.
However what this bug report is all about is that I can't get any sound
playing from the first channel through anything connected to the socket
originally (according to the MoBo manual) used for LFE/Center neither
using the surround51 nor hw:0,0 pcm. I also tried to make my own pcm but
the diagnosis is the
same.
Here are the facts:
My speakers connected just the way they work in Windows.
$speaker-test -c6 -Dsurround51
Playback device is surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 3 to 5461
Period size range from 3 to 5461
Periods = 4
Buffer time size 2525
To choose buffer_size = 5460
To choose period_size = 1365
was set period_size = 1365
was set buffer_size = 5460
0 - Front Left # I hear the beep correctly from correct
speaker
4 - Center # I hear the beep correctly from correct
speaker
1 - Front Right # I hear the beep correctly from correct
speaker
3 - Rear Right # No sound ;(((
2 - Rear Left # I hear the beep correctly from correct
speaker
5 - LFE # I hear the beep correctly from correct
speaker (yes it's quiet, but I''m sure it comes from the Subwoofer only)
When I create my own pcm that reroutes the 3rd channel to some other - it
plays from the position where routed, but nothing ever gets played from
that muted channel when routed there - hence my diagnosis.
When I use hw:0,0 the situation's the same except the LFE/Center and Rear
sockets are swapped, as stated before.
Moreover if I turn the switches "Mic as Center" and "Line-in as surround"
"on" to use it the Epox way, and plug my jacks where stated, the case is
similar but even worse, since it won't play ANY of the first channels
(i.e. Rear Right and LFE from surround51 pcm) at both sockets. Second
channels (Center and Rear Left) work just fine.
Or maybe it has something to do with settings for capture, because I
haven't used it and played with it at all? Let me know if they can affect
it and if so, I think there should be some notice somewhere (on the
module's istalation manual), because I couldn't find any.
Additionally when tried to play with the "Swap surround slot" option there
was a thought of another may-be-issue that came to me. Namely when i turn
the option "on" and physically do the swap, the "Duplicate Front" option
duplicates front channels still to the Unswapped plug i.e. I hear the
channels through the Center/LFE channels. I think that the "Duplicate
front" switch should be affected by the "Swap surround" switch. Don't You
think so?
I'm in a dead end right now and quite desperate. I also am interested in
making Linux work on more hardware!
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
duplicate of 0000846 Can't hear sound from one of the surrou...
======================================================================
----------------------------------------------------------------------
stephenv - 03-04-05 01:56
----------------------------------------------------------------------
This looks exactly like what is reported in 0000846. But so far, nothing
has been done to fix it. Think I am going to have to splurge on an
audigy2.
----------------------------------------------------------------------
slammer - 03-10-05 13:20
----------------------------------------------------------------------
CVS version fixes the issue. And yes - I guess it's the same issue as
reported in 846
Thanks for your great job guys!
I realy appreciate what you're doing for the community!!!!
I'm planning to follow your example!
Issue History
Date Modified Username Field Change
======================================================================
02-12-05 00:02 slammer New Issue
02-12-05 00:02 slammer Distribution => Slackware
02-12-05 00:02 slammer Kernel Version => 2.6.11-rc2
02-12-05 00:43 slammer Issue Monitored: slammer
02-25-05 12:44 slammer Note Added: 0003733
02-28-05 21:51 slammer Note Added: 0003750
03-03-05 20:07 slammer Note Added: 0003791
03-04-05 01:56 stephenv Note Added: 0003794
03-06-05 13:31 slammer Note Edited: 0003791
03-10-05 13:20 slammer Note Added: 0003851
03-10-05 14:36 tiwai Relationship added duplicate of 0000846
03-10-05 14:36 tiwai Duplicate ID 0 => 846
03-10-05 14:36 tiwai Status new => resolved
03-10-05 14:36 tiwai Resolution open => duplicate
03-10-05 14:36 tiwai Assigned To => tiwai
03-10-05 14:36 tiwai Assigned To tiwai =>
03-10-05 15:14 slammer Issue End Monitor: slammer
05-31-05 18:03 perex Status resolved => closed
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2005-05-31 16:03 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-02-28 20:51 [ALSA - driver 0000902]: Some channels not working bugtrack
-- strict thread matches above, loose matches on Subject: below --
2005-05-31 16:03 bugtrack
2005-03-10 13:36 bugtrack
2005-03-10 12:20 bugtrack
2005-03-04 0:56 bugtrack
2005-03-03 19:07 bugtrack
2005-02-25 11:44 bugtrack
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox