* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-22 12:30 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-22 12:30 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-22-2006 14:30 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
rlrevell - 06-22-06 03:29
----------------------------------------------------------------------
What does that have to do with the driver failing to detect the MPU port?
----------------------------------------------------------------------
Raymond - 06-22-06 14:30
----------------------------------------------------------------------
May be via82c686b cannot use PCI BAR2 as mpu port when it BAR2 is > 0x1000
e400-e403 : 0000:00:07.5
e400-e403 : VIA686A
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
06-21-06 18:00 El Santo Note Added: 0010400
06-22-06 03:19 Raymond Note Added: 0010412
06-22-06 03:27 Raymond Note Edited: 0010412
06-22-06 03:29 rlrevell Note Added: 0010413
06-22-06 14:30 Raymond Note Added: 0010422
======================================================================
All the advantages of Linux Managed Hosting--Without the Cost and Risk!
Fully trained technicians. The highest number of Red Hat certifications in
the hosting industry. Fanatical Support. Click to learn more
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-27 6:41 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-27 6:41 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-27-2006 08:41 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
rlrevell - 06-26-06 19:25
----------------------------------------------------------------------
Can you try 1.0.12-rc1?
----------------------------------------------------------------------
Raymond - 06-27-06 08:41
----------------------------------------------------------------------
>> I also set mpu_port parameter for snd-via82xx module.
>> The result is the same: no midi port
Do you mean no error message in system log (dmesg) when snd-via82xx is
loaded ?
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
06-21-06 18:00 El Santo Note Added: 0010400
06-22-06 03:19 Raymond Note Added: 0010412
06-22-06 03:27 Raymond Note Edited: 0010412
06-22-06 03:29 rlrevell Note Added: 0010413
06-22-06 14:30 Raymond Note Added: 0010422
06-24-06 09:43 Raymond Note Added: 0010469
06-25-06 22:02 El Santo Note Added: 0010520
06-26-06 06:52 Raymond Note Added: 0010524
06-26-06 06:56 Raymond Note Edited: 0010524
06-26-06 07:50 Raymond Note Edited: 0010524
06-26-06 18:44 El Santo Note Added: 0010557
06-26-06 18:51 rlrevell Note Added: 0010558
06-26-06 19:14 El Santo Note Added: 0010559
06-26-06 19:25 rlrevell Note Added: 0010560
06-27-06 08:41 Raymond Note Added: 0010568
======================================================================
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-26 17:25 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-26 17:25 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-26-2006 19:25 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
El Santo - 06-26-06 19:14
----------------------------------------------------------------------
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07
13:30:21 2005 UTC).
----------------------------------------------------------------------
rlrevell - 06-26-06 19:25
----------------------------------------------------------------------
Can you try 1.0.12-rc1?
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
06-21-06 18:00 El Santo Note Added: 0010400
06-22-06 03:19 Raymond Note Added: 0010412
06-22-06 03:27 Raymond Note Edited: 0010412
06-22-06 03:29 rlrevell Note Added: 0010413
06-22-06 14:30 Raymond Note Added: 0010422
06-24-06 09:43 Raymond Note Added: 0010469
06-25-06 22:02 El Santo Note Added: 0010520
06-26-06 06:52 Raymond Note Added: 0010524
06-26-06 06:56 Raymond Note Edited: 0010524
06-26-06 07:50 Raymond Note Edited: 0010524
06-26-06 18:44 El Santo Note Added: 0010557
06-26-06 18:51 rlrevell Note Added: 0010558
06-26-06 19:14 El Santo Note Added: 0010559
06-26-06 19:25 rlrevell Note Added: 0010560
======================================================================
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-26 17:14 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-26 17:14 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-26-2006 19:14 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
rlrevell - 06-26-06 18:51
----------------------------------------------------------------------
cat /proc/asound/version
----------------------------------------------------------------------
El Santo - 06-26-06 19:14
----------------------------------------------------------------------
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07
13:30:21 2005 UTC).
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
06-21-06 18:00 El Santo Note Added: 0010400
06-22-06 03:19 Raymond Note Added: 0010412
06-22-06 03:27 Raymond Note Edited: 0010412
06-22-06 03:29 rlrevell Note Added: 0010413
06-22-06 14:30 Raymond Note Added: 0010422
06-24-06 09:43 Raymond Note Added: 0010469
06-25-06 22:02 El Santo Note Added: 0010520
06-26-06 06:52 Raymond Note Added: 0010524
06-26-06 06:56 Raymond Note Edited: 0010524
06-26-06 07:50 Raymond Note Edited: 0010524
06-26-06 18:44 El Santo Note Added: 0010557
06-26-06 18:51 rlrevell Note Added: 0010558
06-26-06 19:14 El Santo Note Added: 0010559
======================================================================
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-26 16:51 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-26 16:51 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-26-2006 18:51 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
El Santo - 06-26-06 18:44
----------------------------------------------------------------------
but what i want is to record/play music with a external midi keyboard.
I report i was using a 1.0.11 version of alsa because that was the output
of `amidi -V`.
The alsa drivers are those included with debian kernel 2.6.15-1-686. I'm
not sure about how to ask the system to tell the drivers version.
----------------------------------------------------------------------
rlrevell - 06-26-06 18:51
----------------------------------------------------------------------
cat /proc/asound/version
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
06-21-06 18:00 El Santo Note Added: 0010400
06-22-06 03:19 Raymond Note Added: 0010412
06-22-06 03:27 Raymond Note Edited: 0010412
06-22-06 03:29 rlrevell Note Added: 0010413
06-22-06 14:30 Raymond Note Added: 0010422
06-24-06 09:43 Raymond Note Added: 0010469
06-25-06 22:02 El Santo Note Added: 0010520
06-26-06 06:52 Raymond Note Added: 0010524
06-26-06 06:56 Raymond Note Edited: 0010524
06-26-06 07:50 Raymond Note Edited: 0010524
06-26-06 18:44 El Santo Note Added: 0010557
06-26-06 18:51 rlrevell Note Added: 0010558
======================================================================
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-26 16:44 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-26 16:44 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-26-2006 18:44 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
Raymond - 06-26-06 07:50
----------------------------------------------------------------------
Please note that mpu401 is for midi keyboard and synth through midi cable ,
if you just want to play midi file, install software synth (e.g.
timidity).
aplaymidi -l
Port Client name Port name
62:0 Midi Through Midi Through Port-0
It seem that you are using ALSA-1.0.10 or eailer version which is
different from your reported version 1.0.11
http://hg-mirror.alsa-project.org/alsa-kernel?cmd=changeset;node=ad7a63c4db69;style=gitweb
The source code of snd-via686a (alsa-0.9) seem not available on CVS
anymore after merge into via82xx.c
----------------------------------------------------------------------
El Santo - 06-26-06 18:44
----------------------------------------------------------------------
but what i want is to record/play music with a external midi keyboard.
I report i was using a 1.0.11 version of alsa because that was the output
of `amidi -V`.
The alsa drivers are those included with debian kernel 2.6.15-1-686. I'm
not sure about how to ask the system to tell the drivers version.
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
06-21-06 18:00 El Santo Note Added: 0010400
06-22-06 03:19 Raymond Note Added: 0010412
06-22-06 03:27 Raymond Note Edited: 0010412
06-22-06 03:29 rlrevell Note Added: 0010413
06-22-06 14:30 Raymond Note Added: 0010422
06-24-06 09:43 Raymond Note Added: 0010469
06-25-06 22:02 El Santo Note Added: 0010520
06-26-06 06:52 Raymond Note Added: 0010524
06-26-06 06:56 Raymond Note Edited: 0010524
06-26-06 07:50 Raymond Note Edited: 0010524
06-26-06 18:44 El Santo Note Added: 0010557
======================================================================
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-26 4:52 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-26 4:52 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-26-2006 06:52 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
El Santo - 06-25-06 22:02
----------------------------------------------------------------------
The BIOS setting are equal to those of the link
http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg08016.html
I follow the thread but i fond no solution there.
----------------------------------------------------------------------
Raymond - 06-26-06 06:52
----------------------------------------------------------------------
Please note that mpu401 is for midi keyboard and synth through midi cable ,
if you just want to play midi file, install software synth (e.g.
timidity).
aplaymidi -l
Port Client name Port name
62:0 Midi Through Midi Through Port-0
This means that you are using ALSA-1.0.10 or eailer version which is
different from your reported version 1.0.11
The source code of snd-via686a (alsa-0.9) seem not available on CVS
anymore after merge into via82xx.c
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
06-21-06 18:00 El Santo Note Added: 0010400
06-22-06 03:19 Raymond Note Added: 0010412
06-22-06 03:27 Raymond Note Edited: 0010412
06-22-06 03:29 rlrevell Note Added: 0010413
06-22-06 14:30 Raymond Note Added: 0010422
06-24-06 09:43 Raymond Note Added: 0010469
06-25-06 22:02 El Santo Note Added: 0010520
06-26-06 06:52 Raymond Note Added: 0010524
======================================================================
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-25 20:02 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-25 20:02 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-25-2006 22:02 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
Raymond - 06-24-06 09:43
----------------------------------------------------------------------
Refer to
http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg08016.html
Are the BIOS setting (onboard sound) of your MX36LE similar to KT3-AV ?
----------------------------------------------------------------------
El Santo - 06-25-06 22:02
----------------------------------------------------------------------
The BIOS setting are equal to those of the link
http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg08016.html
I follow the thread but i fond no solution there.
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
06-21-06 18:00 El Santo Note Added: 0010400
06-22-06 03:19 Raymond Note Added: 0010412
06-22-06 03:27 Raymond Note Edited: 0010412
06-22-06 03:29 rlrevell Note Added: 0010413
06-22-06 14:30 Raymond Note Added: 0010422
06-24-06 09:43 Raymond Note Added: 0010469
06-25-06 22:02 El Santo Note Added: 0010520
======================================================================
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-24 7:43 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-24 7:43 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-24-2006 09:43 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
Raymond - 06-22-06 14:30
----------------------------------------------------------------------
May be via82c686b cannot use PCI BAR2 as mpu port when it BAR2 is > 0x1000
e400-e403 : 0000:00:07.5
e400-e403 : VIA686A
----------------------------------------------------------------------
Raymond - 06-24-06 09:43
----------------------------------------------------------------------
Refer to
http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg08016.html
Are the BIOS setting (onboard sound) of your MX36LE similar to KT3-AV ?
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
06-21-06 18:00 El Santo Note Added: 0010400
06-22-06 03:19 Raymond Note Added: 0010412
06-22-06 03:27 Raymond Note Edited: 0010412
06-22-06 03:29 rlrevell Note Added: 0010413
06-22-06 14:30 Raymond Note Added: 0010422
06-24-06 09:43 Raymond Note Added: 0010469
======================================================================
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-22 1:29 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-22 1:29 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-22-2006 03:29 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
Raymond - 06-22-06 03:27
----------------------------------------------------------------------
If you are using ALSA-1.0.11, snd-seq-dummy (midi through) should be at
port 14.
aplaymidi -l
Port Client name Port name
14:0 Midi Through Midi Through Port-0
How do you install alsa-driver, alsa-lib, alsa-utils ?
----------------------------------------------------------------------
rlrevell - 06-22-06 03:29
----------------------------------------------------------------------
What does that have to do with the driver failing to detect the MPU port?
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
06-21-06 18:00 El Santo Note Added: 0010400
06-22-06 03:19 Raymond Note Added: 0010412
06-22-06 03:27 Raymond Note Edited: 0010412
06-22-06 03:29 rlrevell Note Added: 0010413
======================================================================
All the advantages of Linux Managed Hosting--Without the Cost and Risk!
Fully trained technicians. The highest number of Red Hat certifications in
the hosting industry. Fanatical Support. Click to learn more
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-22 1:19 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-22 1:19 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-22-2006 03:19 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
El Santo - 06-21-06 18:00
----------------------------------------------------------------------
I tryed with and without "pci=routeirq" and "lapic".
I also set mpu_port parameter for snd-via82xx module.
The result is the same: no midi port
----------------------------------------------------------------------
Raymond - 06-22-06 03:19
----------------------------------------------------------------------
If you are using ALSA-1.0.11, snd-seq-dummy (midi through) should be at
port 14.
aplaymidi -l
Port Client name Port name
14:0 Midi Through Midi Through Port-0
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
06-21-06 18:00 El Santo Note Added: 0010400
06-22-06 03:19 Raymond Note Added: 0010412
======================================================================
All the advantages of Linux Managed Hosting--Without the Cost and Risk!
Fully trained technicians. The highest number of Red Hat certifications in
the hosting industry. Fanatical Support. Click to learn more
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-21 16:00 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-21 16:00 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-21-2006 18:00 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
Raymond - 06-21-06 04:51
----------------------------------------------------------------------
The mpu_port value must match with BIOS setup, it seem that the driver is
unable to obtain BIOS setup in snd_via82xx_init_misc()
Module snd-via82xx
------------------
Module for AC'97 motherboards based on VIA 82C686A/686B, 8233,
8233A, 8233C, 8235, 8237 (south) bridge.
mpu_port - 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup
[VIA686A/686B only]
----------------------------------------------------------------------
El Santo - 06-21-06 18:00
----------------------------------------------------------------------
I tryed with and without "pci=routeirq" and "lapic".
I also set mpu_port parameter for snd-via82xx module.
The result is the same: no midi port
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
06-21-06 18:00 El Santo Note Added: 0010400
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-21 2:51 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-21 2:51 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-21-2006 04:51 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
rlrevell - 06-21-06 02:02
----------------------------------------------------------------------
Please disregard my last message - try this instead (from Rene Herman)
"Looking at the driver, please make him provide "mpu_port=0x330" as a
parameter to snd-via82xx and check if it then works (if it does, there
is a "VIA82xx MPU401" at 0x330 in /proc/ioports, and aplaymidi -l will
list the MPU401 UART)."
----------------------------------------------------------------------
Raymond - 06-21-06 04:51
----------------------------------------------------------------------
The mpu_port value must match with BIOS setup, it seem that the driver is
unable to obtain BIOS setup in snd_via82xx_init_misc()
Module snd-via82xx
------------------
Module for AC'97 motherboards based on VIA 82C686A/686B, 8233,
8233A, 8233C, 8235, 8237 (south) bridge.
mpu_port - 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup
[VIA686A/686B only]
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
06-21-06 04:51 Raymond Note Added: 0010379
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-21 0:02 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-21 0:02 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-21-2006 02:02 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
rlrevell - 06-21-06 00:56
----------------------------------------------------------------------
Kernel command line: root=/dev/hda2 ro pci=routeirq
Local APIC disabled by BIOS -- you can enable it with "lapic"
Try booting without "pci=routeirq". Try enabling "lapic". Try kernel
2.6.17.
If all of the above fail, report the bug on the kernel mailing list
(including dmesg output)
----------------------------------------------------------------------
rlrevell - 06-21-06 02:02
----------------------------------------------------------------------
Please disregard my last message - try this instead (from Rene Herman)
"Looking at the driver, please make him provide "mpu_port=0x330" as a
parameter to snd-via82xx and check if it then works (if it does, there
is a "VIA82xx MPU401" at 0x330 in /proc/ioports, and aplaymidi -l will
list the MPU401 UART)."
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
06-21-06 02:02 rlrevell Note Added: 0010374
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-20 22:56 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-20 22:56 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-21-2006 00:56 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
rlrevell - 06-21-06 00:52
----------------------------------------------------------------------
No, they would still show up. For example I have no Firewire driver
loaded. But it still shows up in ioports:
03c0-03df : vga+
0400-047f : 0000:00:11.0
0500-050f : 0000:00:11.0
d000-d07f : 0000:00:0d.0
^^^^^^^^^^^^
d400-d41f : 0000:00:10.0
$ lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266
AGP]
0000:00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
----------------------------------------------------------------------
rlrevell - 06-21-06 00:56
----------------------------------------------------------------------
Kernel command line: root=/dev/hda2 ro pci=routeirq
Local APIC disabled by BIOS -- you can enable it with "lapic"
Try booting without "pci=routeirq". Try enabling "lapic". Try kernel
2.6.17.
If all of the above fail, report the bug on the kernel mailing list
(including dmesg output)
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
06-21-06 00:56 rlrevell Note Added: 0010370
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-20 22:52 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-20 22:52 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-21-2006 00:52 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
El Santo - 06-21-06 00:36
----------------------------------------------------------------------
i attached the dmesg output... i thing that the entries in ioports are
addresses managed by kernel modules... if the module is not loaded i think
that the port will not be in ioports.
----------------------------------------------------------------------
rlrevell - 06-21-06 00:52
----------------------------------------------------------------------
No, they would still show up. For example I have no Firewire driver
loaded. But it still shows up in ioports:
03c0-03df : vga+
0400-047f : 0000:00:11.0
0500-050f : 0000:00:11.0
d000-d07f : 0000:00:0d.0
^^^^^^^^^^^^
d400-d41f : 0000:00:10.0
$ lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266
AGP]
0000:00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
06-21-06 00:52 rlrevell Note Added: 0010369
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-20 22:36 bugtrack
2006-06-20 23:30 ` Rene Herman
0 siblings, 1 reply; 32+ messages in thread
From: bugtrack @ 2006-06-20 22:36 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-21-2006 00:36 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
rlrevell - 06-21-06 00:18
----------------------------------------------------------------------
It must be a kernel bug if the port does not appear in /proc/ioports.
Please attach dmesg output (do not paste it inline)
----------------------------------------------------------------------
El Santo - 06-21-06 00:36
----------------------------------------------------------------------
i attached the dmesg output... i thing that the entries in ioports are
addresses managed by kernel modules... if the module is not loaded i think
that the port will not be in ioports.
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
06-21-06 00:33 El Santo File Added: dmesg.log
06-21-06 00:36 El Santo Note Added: 0010367
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [ALSA - driver 0002219]: snd-mpu401 don't load
2006-06-20 22:36 bugtrack
@ 2006-06-20 23:30 ` Rene Herman
2006-06-20 23:35 ` Lee Revell
0 siblings, 1 reply; 32+ messages in thread
From: Rene Herman @ 2006-06-20 23:30 UTC (permalink / raw)
To: rlrevell; +Cc: alsa-devel
bugtrack@alsa-project.org wrote:
> ----------------------------------------------------------------------
> rlrevell - 06-21-06 00:18
> ----------------------------------------------------------------------
> It must be a kernel bug if the port does not appear in /proc/ioports.
Lee, please note that legacy (ISA/LPC, even PnP/ACPI controlled) hw does
not ever appear in /proc/ioports without the driver loaded and having
done a request_region().
By the way, the missing IRQ is not necesarily a problem. An MPU401 can
output MIDI fine without using an IRQ and if his BIOS does not let him
assign an IRQ (and Windows does not use one) I guess no IRQ is available
for it.
Rene.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [ALSA - driver 0002219]: snd-mpu401 don't load
2006-06-20 23:30 ` Rene Herman
@ 2006-06-20 23:35 ` Lee Revell
2006-06-20 23:46 ` Rene Herman
0 siblings, 1 reply; 32+ messages in thread
From: Lee Revell @ 2006-06-20 23:35 UTC (permalink / raw)
To: Rene Herman; +Cc: alsa-devel
On Wed, 2006-06-21 at 01:30 +0200, Rene Herman wrote:
> bugtrack@alsa-project.org wrote:
>
> > ----------------------------------------------------------------------
> > rlrevell - 06-21-06 00:18
> > ----------------------------------------------------------------------
> > It must be a kernel bug if the port does not appear in /proc/ioports.
>
> Lee, please note that legacy (ISA/LPC, even PnP/ACPI controlled) hw does
> not ever appear in /proc/ioports without the driver loaded and having
> done a request_region().
>
> By the way, the missing IRQ is not necesarily a problem. An MPU401 can
> output MIDI fine without using an IRQ and if his BIOS does not let him
> assign an IRQ (and Windows does not use one) I guess no IRQ is available
> for it.
So where's the bug?
Lee
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [ALSA - driver 0002219]: snd-mpu401 don't load
2006-06-20 23:35 ` Lee Revell
@ 2006-06-20 23:46 ` Rene Herman
2006-06-20 23:54 ` Lee Revell
2006-06-20 23:57 ` Rene Herman
0 siblings, 2 replies; 32+ messages in thread
From: Rene Herman @ 2006-06-20 23:46 UTC (permalink / raw)
To: Lee Revell; +Cc: alsa-devel
Lee Revell wrote:
>>> ----------------------------------------------------------------------
>>> rlrevell - 06-21-06 00:18
>>> ----------------------------------------------------------------------
>>> It must be a kernel bug if the port does not appear in /proc/ioports.
>> Lee, please note that legacy (ISA/LPC, even PnP/ACPI controlled) hw does
>> not ever appear in /proc/ioports without the driver loaded and having
>> done a request_region().
>>
>> By the way, the missing IRQ is not necesarily a problem. An MPU401 can
>> output MIDI fine without using an IRQ and if his BIOS does not let him
>> assign an IRQ (and Windows does not use one) I guess no IRQ is available
>> for it.
>
> So where's the bug?
Dunno -- but the snd-mpu401 thing is irrelevant; he said snd-mpu401-uart
_was_ being loaded, and it should then just take care of the port. As to
why it's not doing so...
Maybe it's under an unknown PnP ID and not being enabled or something
like that. Dunno again.
Rene.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [ALSA - driver 0002219]: snd-mpu401 don't load
2006-06-20 23:46 ` Rene Herman
@ 2006-06-20 23:54 ` Lee Revell
2006-06-20 23:57 ` Rene Herman
1 sibling, 0 replies; 32+ messages in thread
From: Lee Revell @ 2006-06-20 23:54 UTC (permalink / raw)
To: Rene Herman; +Cc: alsa-devel
On Wed, 2006-06-21 at 01:46 +0200, Rene Herman wrote:
> Lee Revell wrote:
>
> >>> ----------------------------------------------------------------------
> >>> rlrevell - 06-21-06 00:18
> >>> ----------------------------------------------------------------------
> >>> It must be a kernel bug if the port does not appear in /proc/ioports.
>
> >> Lee, please note that legacy (ISA/LPC, even PnP/ACPI controlled) hw does
> >> not ever appear in /proc/ioports without the driver loaded and having
> >> done a request_region().
> >>
> >> By the way, the missing IRQ is not necesarily a problem. An MPU401 can
> >> output MIDI fine without using an IRQ and if his BIOS does not let him
> >> assign an IRQ (and Windows does not use one) I guess no IRQ is available
> >> for it.
> >
> > So where's the bug?
>
> Dunno -- but the snd-mpu401 thing is irrelevant; he said snd-mpu401-uart
> _was_ being loaded, and it should then just take care of the port. As to
> why it's not doing so...
>
> Maybe it's under an unknown PnP ID and not being enabled or something
> like that. Dunno again.
OK, I don't know anything about ancient, pre-PCI hardware, so I guess I
can't help.
Lee
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [ALSA - driver 0002219]: snd-mpu401 don't load
2006-06-20 23:46 ` Rene Herman
2006-06-20 23:54 ` Lee Revell
@ 2006-06-20 23:57 ` Rene Herman
1 sibling, 0 replies; 32+ messages in thread
From: Rene Herman @ 2006-06-20 23:57 UTC (permalink / raw)
To: Lee Revell; +Cc: alsa-devel
Rene Herman wrote:
> Dunno -- but the snd-mpu401 thing is irrelevant; he said
> snd-mpu401-uart _was_ being loaded, and it should then just take care
> of the port. As to why it's not doing so...
Looking at the driver, please make him provide "mpu_port=0x330" as a
parameter to snd-via82xx and check if it then works (if it does, there
is a "VIA82xx MPU401" at 0x330 in /proc/ioports, and aplaymidi -l will
list the MPU401 UART).
Rene.
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-20 22:18 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-20 22:18 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-21-2006 00:18 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
El Santo - 06-21-06 00:12
----------------------------------------------------------------------
i can set (or see) the MPU401 io port in BIOS but i can not set (or see)
the MPU401 IRQ.
The port is enabled and it works with windows xp
----------------------------------------------------------------------
rlrevell - 06-21-06 00:18
----------------------------------------------------------------------
It must be a kernel bug if the port does not appear in /proc/ioports.
Please attach dmesg output (do not paste it inline)
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
06-21-06 00:18 rlrevell Note Added: 0010366
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-20 22:12 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-20 22:12 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-21-2006 00:12 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
rlrevell - 06-21-06 00:04
----------------------------------------------------------------------
Actually never mind - neither 0x300 nor 0x330 appear in ioports.
Does this mean the BIOS is disabling the device?
----------------------------------------------------------------------
El Santo - 06-21-06 00:12
----------------------------------------------------------------------
i can set (or see) the MPU401 io port in BIOS but i can not set (or see)
the MPU401 IRQ.
The port is enabled and it works with windows xp
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
06-21-06 00:12 El Santo Note Added: 0010365
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-20 22:04 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-20 22:04 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-21-2006 00:04 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
rlrevell - 06-21-06 00:00
----------------------------------------------------------------------
Doesn't "gameport" conflict with "snd-mpu401"?
Try blacklisting gameport and/or snd-mpu401-uart, reboot and try again
----------------------------------------------------------------------
rlrevell - 06-21-06 00:04
----------------------------------------------------------------------
Actually never mind - neither 0x300 nor 0x330 appear in ioports.
Does this mean the BIOS is disabling the device?
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
06-21-06 00:04 rlrevell Note Added: 0010364
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-20 22:00 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-20 22:00 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-21-2006 00:00 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
El Santo - 06-20-06 23:54
----------------------------------------------------------------------
-------------------
cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02e8-02ef : serial
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03e8-03ef : serial
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
4000-4003 : PM1a_EVT_BLK
4008-400b : PM_TMR
4010-4015 : ACPI CPU throttle
4020-4023 : GPE0_BLK
40f0-40f1 : PM1a_CNT_BLK
5000-500f : 0000:00:07.4
5000-5007 : vt596_smbus
6000-607f : 0000:00:07.4
6000-607f : via686a
d000-d00f : 0000:00:07.1
d000-d007 : ide0
d008-d00f : ide1
d400-d41f : 0000:00:07.2
d400-d41f : uhci_hcd
d800-d81f : 0000:00:07.3
d800-d81f : uhci_hcd
dc00-dcff : 0000:00:07.5
dc00-dcff : VIA686A
e000-e003 : 0000:00:07.5
e000-e003 : VIA686A
e400-e403 : 0000:00:07.5
e400-e403 : VIA686A
ec00-ec7f : 0000:00:09.0
-------------------
-------------------
lsmod
Module Size Used by
ipv6 221696 8
nls_iso8859_1 3936 1
isofs 32792 1
loop 15176 2
dm_mod 51160 0
snd_seq_dummy 3556 0
snd_seq_oss 28896 0
snd_seq_midi 8384 0
snd_seq_midi_event 6368 2 snd_seq_oss,snd_seq_midi
snd_seq 44432 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
shpchp 39712 0
pci_hotplug 24756 1 shpchp
via_agp 9280 1
agpgart 31400 1 via_agp
snd_via82xx 25688 1
gameport 13928 1 snd_via82xx
snd_ac97_codec 82464 1 snd_via82xx
snd_ac97_bus 2048 1 snd_ac97_codec
snd_pcm_oss 45536 0
snd_mixer_oss 16448 1 snd_pcm_oss
snd_pcm 77576 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer 21316 2 snd_seq,snd_pcm
snd_page_alloc 9928 2 snd_via82xx,snd_pcm
snd_mpu401_uart 6592 1 snd_via82xx
via686a 15368 0
bt878 9656 0
snd_rawmidi 22240 2 snd_seq_midi,snd_mpu401_uart
snd_seq_device 7916 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
i2c_isa 4608 1 via686a
i2c_viapro 7924 0
snd 48420 13
snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 8928 1 snd
tuner 36644 0
bttv 151600 1 bt878
video_buf 19748 1 bttv
firmware_class 9696 1 bttv
i2c_algo_bit 8296 1 bttv
v4l2_common 5632 1 bttv
btcx_risc 4520 1 bttv
tveeprom 13744 1 bttv
i2c_core 19280 7
via686a,i2c_isa,i2c_viapro,tuner,bttv,i2c_algo_bit,tveeprom
videodev 8768 1 bttv
parport_pc 32036 0
parport 31624 1 parport_pc
pcspkr 1668 0
psmouse 32356 0
serio_raw 6468 0
rtc 11316 0
floppy 54628 0
joydev 8864 0
evdev 8800 2
mousedev 10496 1
ext3 117768 2
jbd 48404 1 ext3
mbcache 8484 1 ext3
ide_disk 15712 4
ide_cd 36484 0
cdrom 33280 1 ide_cd
via82cxxx 8164 0 [permanent]
generic 4260 0 [permanent]
ide_core 112800 4 ide_disk,ide_cd,via82cxxx,generic
uhci_hcd 28016 0
usbcore 113284 2 uhci_hcd
3c59x 39432 0
mii 5056 1 3c59x
thermal 13416 0
processor 22912 1 thermal
fan 4580 0
-------------------
----------------------------------------------------------------------
rlrevell - 06-21-06 00:00
----------------------------------------------------------------------
Doesn't "gameport" conflict with "snd-mpu401"?
Try blacklisting gameport and/or snd-mpu401-uart, reboot and try again
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
06-21-06 00:00 rlrevell Note Added: 0010363
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-20 21:54 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-20 21:54 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-20-2006 23:54 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
rlrevell - 06-20-06 23:39
----------------------------------------------------------------------
What is the output of "cat /proc/ioports" and "lsmod"?
----------------------------------------------------------------------
El Santo - 06-20-06 23:54
----------------------------------------------------------------------
-------------------
cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02e8-02ef : serial
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03e8-03ef : serial
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
4000-4003 : PM1a_EVT_BLK
4008-400b : PM_TMR
4010-4015 : ACPI CPU throttle
4020-4023 : GPE0_BLK
40f0-40f1 : PM1a_CNT_BLK
5000-500f : 0000:00:07.4
5000-5007 : vt596_smbus
6000-607f : 0000:00:07.4
6000-607f : via686a
d000-d00f : 0000:00:07.1
d000-d007 : ide0
d008-d00f : ide1
d400-d41f : 0000:00:07.2
d400-d41f : uhci_hcd
d800-d81f : 0000:00:07.3
d800-d81f : uhci_hcd
dc00-dcff : 0000:00:07.5
dc00-dcff : VIA686A
e000-e003 : 0000:00:07.5
e000-e003 : VIA686A
e400-e403 : 0000:00:07.5
e400-e403 : VIA686A
ec00-ec7f : 0000:00:09.0
-------------------
-------------------
lsmod
Module Size Used by
ipv6 221696 8
nls_iso8859_1 3936 1
isofs 32792 1
loop 15176 2
dm_mod 51160 0
snd_seq_dummy 3556 0
snd_seq_oss 28896 0
snd_seq_midi 8384 0
snd_seq_midi_event 6368 2 snd_seq_oss,snd_seq_midi
snd_seq 44432 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
shpchp 39712 0
pci_hotplug 24756 1 shpchp
via_agp 9280 1
agpgart 31400 1 via_agp
snd_via82xx 25688 1
gameport 13928 1 snd_via82xx
snd_ac97_codec 82464 1 snd_via82xx
snd_ac97_bus 2048 1 snd_ac97_codec
snd_pcm_oss 45536 0
snd_mixer_oss 16448 1 snd_pcm_oss
snd_pcm 77576 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer 21316 2 snd_seq,snd_pcm
snd_page_alloc 9928 2 snd_via82xx,snd_pcm
snd_mpu401_uart 6592 1 snd_via82xx
via686a 15368 0
bt878 9656 0
snd_rawmidi 22240 2 snd_seq_midi,snd_mpu401_uart
snd_seq_device 7916 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
i2c_isa 4608 1 via686a
i2c_viapro 7924 0
snd 48420 13
snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 8928 1 snd
tuner 36644 0
bttv 151600 1 bt878
video_buf 19748 1 bttv
firmware_class 9696 1 bttv
i2c_algo_bit 8296 1 bttv
v4l2_common 5632 1 bttv
btcx_risc 4520 1 bttv
tveeprom 13744 1 bttv
i2c_core 19280 7
via686a,i2c_isa,i2c_viapro,tuner,bttv,i2c_algo_bit,tveeprom
videodev 8768 1 bttv
parport_pc 32036 0
parport 31624 1 parport_pc
pcspkr 1668 0
psmouse 32356 0
serio_raw 6468 0
rtc 11316 0
floppy 54628 0
joydev 8864 0
evdev 8800 2
mousedev 10496 1
ext3 117768 2
jbd 48404 1 ext3
mbcache 8484 1 ext3
ide_disk 15712 4
ide_cd 36484 0
cdrom 33280 1 ide_cd
via82cxxx 8164 0 [permanent]
generic 4260 0 [permanent]
ide_core 112800 4 ide_disk,ide_cd,via82cxxx,generic
uhci_hcd 28016 0
usbcore 113284 2 uhci_hcd
3c59x 39432 0
mii 5056 1 3c59x
thermal 13416 0
processor 22912 1 thermal
fan 4580 0
-------------------
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
06-20-06 23:54 El Santo Note Added: 0010362
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-20 21:39 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-20 21:39 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-20-2006 23:39 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
El Santo - 06-20-06 23:30
----------------------------------------------------------------------
Hi again!
My message had a typo: the motherboard is not AOpen MX63LE, but AOpen
MX36LE.
I also tryed to load the module without parameters....
modprobe snd-mpu401
FATAL: Error inserting snd_mpu401
(/lib/modules/2.6.15-1-686/kernel/sound/drivers/mpu401/snd-mpu401.ko): No
such device
FATAL: Error running install command for snd_mpu401
... and a "MPU-401 device not found or device busy" is added to syslog
the outputs of the commands:
------------------
aplaymidi -l
Port Client name Port name
62:0 Midi Through Midi Through Port-0
------------------
cat /proc/asound/cards
0 [rev50 ]: VIA686A - VIA 82C686A/B rev50
VIA 82C686A/B rev50 with AD1885 at 0xdc00, irq 10
------------------
lspci -vn
0000:00:00.0 0600: 1106:0601 (rev 05)
Flags: bus master, medium devsel, latency 8
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
0000:00:01.0 0604: 1106:8601
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e4000000-e6ffffff
Prefetchable memory behind bridge: 20000000-200fffff
Capabilities: <available only to root>
0000:00:07.0 0601: 1106:0686 (rev 40)
Subsystem: 1106:0000
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: <available only to root>
0000:00:07.1 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: 1106:0571
Flags: bus master, medium devsel, latency 32
I/O ports at d000 [size=16]
Capabilities: <available only to root>
0000:00:07.2 0c03: 1106:3038 (rev 1a)
Subsystem: 0925:1234
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at d400 [size=32]
Capabilities: <available only to root>
0000:00:07.3 0c03: 1106:3038 (rev 1a)
Subsystem: 0925:1234
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at d800 [size=32]
Capabilities: <available only to root>
0000:00:07.4 0680: 1106:3057 (rev 40)
Subsystem: 1106:3057
Flags: medium devsel, IRQ 9
Capabilities: <available only to root>
0000:00:07.5 0401: 1106:3058 (rev 50)
Subsystem: 11d4:5360
Flags: medium devsel, IRQ 10
I/O ports at dc00 [size=256]
I/O ports at e000 [size=4]
I/O ports at e400 [size=4]
Capabilities: <available only to root>
0000:00:09.0 0200: 10b7:9200 (rev 78)
Subsystem: 10b7:1000
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at ec00 [size=128]
Memory at e8000000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 20100000 [disabled] [size=128K]
Capabilities: <available only to root>
0000:00:0f.0 0400: 109e:036e (rev 11)
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at e8001000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:0f.1 0480: 109e:0878 (rev 11)
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at e8002000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
0000:01:00.0 0300: 1023:8500 (rev 6a)
Subsystem: 1023:8500
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
Memory at e5800000 (32-bit, non-prefetchable) [size=8M]
Memory at e6000000 (32-bit, non-prefetchable) [size=128K]
Memory at e5000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 20000000 [disabled] [size=64K]
Capabilities: <available only to root>
------------------
Regards
----------------------------------------------------------------------
rlrevell - 06-20-06 23:39
----------------------------------------------------------------------
What is the output of "cat /proc/ioports" and "lsmod"?
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
06-20-06 23:39 rlrevell Note Added: 0010359
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-20 21:30 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-20 21:30 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-20-2006 23:30 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
tiwai - 06-20-06 19:49
----------------------------------------------------------------------
Usually snd-mpu401 can be loaded without module options using ACPI PnP.
----------------------------------------------------------------------
El Santo - 06-20-06 23:30
----------------------------------------------------------------------
Hi again!
My message had a typo: the motherboard is not AOpen MX63LE, but AOpen
MX36LE.
I also tryed to load the module without parameters....
modprobe snd-mpu401
FATAL: Error inserting snd_mpu401
(/lib/modules/2.6.15-1-686/kernel/sound/drivers/mpu401/snd-mpu401.ko): No
such device
FATAL: Error running install command for snd_mpu401
... and a "MPU-401 device not found or device busy" is added to syslog
the outputs of the commands:
------------------
aplaymidi -l
Port Client name Port name
62:0 Midi Through Midi Through Port-0
------------------
cat /proc/asound/cards
0 [rev50 ]: VIA686A - VIA 82C686A/B rev50
VIA 82C686A/B rev50 with AD1885 at 0xdc00, irq 10
------------------
lspci -vn
0000:00:00.0 0600: 1106:0601 (rev 05)
Flags: bus master, medium devsel, latency 8
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
0000:00:01.0 0604: 1106:8601
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e4000000-e6ffffff
Prefetchable memory behind bridge: 20000000-200fffff
Capabilities: <available only to root>
0000:00:07.0 0601: 1106:0686 (rev 40)
Subsystem: 1106:0000
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: <available only to root>
0000:00:07.1 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: 1106:0571
Flags: bus master, medium devsel, latency 32
I/O ports at d000 [size=16]
Capabilities: <available only to root>
0000:00:07.2 0c03: 1106:3038 (rev 1a)
Subsystem: 0925:1234
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at d400 [size=32]
Capabilities: <available only to root>
0000:00:07.3 0c03: 1106:3038 (rev 1a)
Subsystem: 0925:1234
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at d800 [size=32]
Capabilities: <available only to root>
0000:00:07.4 0680: 1106:3057 (rev 40)
Subsystem: 1106:3057
Flags: medium devsel, IRQ 9
Capabilities: <available only to root>
0000:00:07.5 0401: 1106:3058 (rev 50)
Subsystem: 11d4:5360
Flags: medium devsel, IRQ 10
I/O ports at dc00 [size=256]
I/O ports at e000 [size=4]
I/O ports at e400 [size=4]
Capabilities: <available only to root>
0000:00:09.0 0200: 10b7:9200 (rev 78)
Subsystem: 10b7:1000
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at ec00 [size=128]
Memory at e8000000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 20100000 [disabled] [size=128K]
Capabilities: <available only to root>
0000:00:0f.0 0400: 109e:036e (rev 11)
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at e8001000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:0f.1 0480: 109e:0878 (rev 11)
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at e8002000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
0000:01:00.0 0300: 1023:8500 (rev 6a)
Subsystem: 1023:8500
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
Memory at e5800000 (32-bit, non-prefetchable) [size=8M]
Memory at e6000000 (32-bit, non-prefetchable) [size=128K]
Memory at e5000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 20000000 [disabled] [size=64K]
Capabilities: <available only to root>
------------------
Regards
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
06-20-06 23:30 El Santo Note Added: 0010357
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-20 17:49 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-20 17:49 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-20-2006 19:49 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
Raymond - 06-19-06 03:45
----------------------------------------------------------------------
Post output of
aplaymidi -l
cat /proc/asound/cards
lspci -vn
----------------------------------------------------------------------
tiwai - 06-20-06 19:49
----------------------------------------------------------------------
Usually snd-mpu401 can be loaded without module options using ACPI PnP.
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
06-20-06 19:49 tiwai Note Added: 0010349
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-19 1:45 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-19 1:45 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-19-2006 03:45 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
----------------------------------------------------------------------
Raymond - 06-19-06 03:45
----------------------------------------------------------------------
Post output of
aplaymidi -l
cat /proc/asound/cards
lspci -vn
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
06-19-06 03:45 Raymond Note Added: 0010305
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ALSA - driver 0002219]: snd-mpu401 don't load
@ 2006-06-18 15:41 bugtrack
0 siblings, 0 replies; 32+ messages in thread
From: bugtrack @ 2006-06-18 15:41 UTC (permalink / raw)
To: alsa-devel
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2219>
======================================================================
Reported By: El Santo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2219
Category: GENERIC - mpu401
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Debian etch (2006-06-18)
Kernel Version: 2.6.15-1-686
======================================================================
Date Submitted: 06-18-2006 17:41 CEST
Last Modified: 06-18-2006 17:41 CEST
======================================================================
Summary: snd-mpu401 don't load
Description:
I have a Aopen MX63LE board with onboard sound managed by snd-via82xx
driver. It loads all necesary modules, includind snd-mpu401-uart, but no
snd-mpu401
The audio part of the driver works perfectly, but the midi port doesn't
work.
In BIOS i can set (and see) the mpu401 port (0x300 or 0x330) but there is
not a MPU401 IRQ setting in bios. When i tried to manually load snd-mpu401
(setting the port accordingly to BIOS) it doesnt work. I don't know the
mpu401 irq setting but i tryed them all. None of them worked. The driver
says "device not found".
Under windows xp the port works perfectly, so the hardware is ok. Anyway
under windows xp, i use a "system inspector" to monitor ioports and irq
usage, and i didnt see any irq assigned for mpu401 port, and the port
(0x330) wasn't occupied neither.
any idea?
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
06-18-06 17:41 El Santo New Issue
06-18-06 17:41 El Santo Distribution => Debian etch
(2006-06-18)
06-18-06 17:41 El Santo Kernel Version => 2.6.15-1-686
======================================================================
^ permalink raw reply [flat|nested] 32+ messages in thread
end of thread, other threads:[~2006-06-27 6:41 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-22 12:30 [ALSA - driver 0002219]: snd-mpu401 don't load bugtrack
-- strict thread matches above, loose matches on Subject: below --
2006-06-27 6:41 bugtrack
2006-06-26 17:25 bugtrack
2006-06-26 17:14 bugtrack
2006-06-26 16:51 bugtrack
2006-06-26 16:44 bugtrack
2006-06-26 4:52 bugtrack
2006-06-25 20:02 bugtrack
2006-06-24 7:43 bugtrack
2006-06-22 1:29 bugtrack
2006-06-22 1:19 bugtrack
2006-06-21 16:00 bugtrack
2006-06-21 2:51 bugtrack
2006-06-21 0:02 bugtrack
2006-06-20 22:56 bugtrack
2006-06-20 22:52 bugtrack
2006-06-20 22:36 bugtrack
2006-06-20 23:30 ` Rene Herman
2006-06-20 23:35 ` Lee Revell
2006-06-20 23:46 ` Rene Herman
2006-06-20 23:54 ` Lee Revell
2006-06-20 23:57 ` Rene Herman
2006-06-20 22:18 bugtrack
2006-06-20 22:12 bugtrack
2006-06-20 22:04 bugtrack
2006-06-20 22:00 bugtrack
2006-06-20 21:54 bugtrack
2006-06-20 21:39 bugtrack
2006-06-20 21:30 bugtrack
2006-06-20 17:49 bugtrack
2006-06-19 1:45 bugtrack
2006-06-18 15:41 bugtrack
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox