Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Myk Robinson <myk.robinson@gmail.com>
To: alsa-devel@lists.sourceforge.net
Subject: Conexant Test
Date: Fri, 27 Oct 2006 16:29:57 +0000 (UTC)	[thread overview]
Message-ID: <loom.20061027T175539-693@post.gmane.org> (raw)

Just adding my experience from the test.

My system is a laptop, Compaq Presario V5204NR.

Here's some outputs:
root@1[mykrob]# lspci -s 0:1b -vn
0000:00:1b.0 0403: 8086:27d8 (rev 01)
        Subsystem: 103c:30a5
        Flags: bus master, fast devsel, latency 0, IRQ 74
        Memory at d0340000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
        Capabilities: [70] #10 [0091]

root@1[mykrob]# cat /proc/asound/card0/codec#0
Codec: Conexant ID 5047
Address: 0
Vendor Id: 0x14f15047
Subsystem Id: 0x103c30a5
Revision Id: 0x100000
Default PCM: rates 0x040, bits 0x02, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1e 0x1e]
  PCM: rates 0x040, bits 0x02, types 0x1
  Power: 0x0
Node 0x11 [Audio Output] wcaps 0x611: Stereo Digital
  PCM: rates 0x040, bits 0x02, types 0x1
  Power: 0x0
Node 0x12 [Audio Input] wcaps 0x100d1b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
  Amp-In vals:  [0x0e 0x0e] [0x8e 0x8e] [0x8e 0x8e] [0x80 0x80] [0x80 0x80]
[0x80 0x80]
  PCM: rates 0x040, bits 0x02, types 0x1
  Power: 0x0
  Connection: 6
     0x19 0x14 0x15* 0x1a 0x16 0x10
Node 0x13 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1e 0x1e]
  Pincap 0x081001c: OUT HP EAPD Detect
  Pin Default 0xc3111010: [Both] Speaker at Ext Left
    Conn = 1/8, Color = Black
  Pin-ctls: 0xc0: OUT HP
  Power: 0x0
  Connection: 3
     0x19* 0x10 0x16
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x0833c: IN OUT HP Detect
  Pin Default 0x03811011: [Jack] Line In at Ext Left
    Conn = 1/8, Color = Black
  Pin-ctls: 0x20: IN
  Power: 0x0
  Connection: 2
     0x19* 0x16
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x0833c: IN OUT HP Detect
  Pin Default 0x03a11012: [Jack] Mic at Ext Left
    Conn = 1/8, Color = Black
  Pin-ctls: 0x20: IN
  Power: 0x0
  Connection: 3
     0x1c 0x19* 0x16
Node 0x16 [Pin Complex] wcaps 0x400401: Stereo
  Pincap 0x0860: IN
  Pin Default 0x99330100: [Fixed] CD at Int ATAPI
    Conn = ATAPI, Color = Unknown
  Pin-ctls: 0x20: IN
  Power: 0x0
Node 0x17 [Pin Complex] wcaps 0x400481: Stereo
  Pincap 0x08324: IN Detect
  Pin Default 0xb7a00100: [Fixed] Mic at Oth Mobile-In
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x00:
  Power: 0x0
Node 0x18 [Pin Complex] wcaps 0x400701: Stereo Digital
  Pincap 0x0810: OUT
  Pin Default 0x21440100: [Jack] SPDIF Out at Sep Rear
    Conn = RCA, Color = Unknown
  Pin-ctls: 0x00:
  Power: 0x0
  Connection: 1
     0x11
Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
  Amp-In caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-In vals:  [0x07 0x07] [0x80 0x80] [0x80 0x80] [0x17 0x17]
  Power: 0x0
  Connection: 4
     0x10 0x1b 0x1a 0x16
Node 0x1a [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x1f, mute=0
  Amp-Out vals:  [0x00 0x00]
  Power: 0x0
  Connection: 3
     0x15* 0x14 0x17
Node 0x1b [Audio Selector] wcaps 0x300501: Stereo
  Power: 0x0
  Connection: 2
     0x14* 0x15
Node 0x1c [Audio Output] wcaps 0x41d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  PCM: rates 0x040, bits 0x02, types 0x1
  Power: 0x0
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
  Amp-Out vals:  [0x1f 0x1f]
  Pincap 0x08314: OUT Detect
  Pin Default 0x90100112: [Fixed] Speaker at Int N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x40: OUT
  Power: 0x0
  Connection: 3
     0x1c 0x19* 0x16
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono


It seems i have a volume increase, but i am unable to record. I want to be able
to record using Ardour like i do on my other system.

thanks for all your work and help.

myk


-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

                 reply	other threads:[~2006-10-27 16:29 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=loom.20061027T175539-693@post.gmane.org \
    --to=myk.robinson@gmail.com \
    --cc=alsa-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox