* Conexant Test
@ 2006-10-27 16:29 Myk Robinson
0 siblings, 0 replies; only message in thread
From: Myk Robinson @ 2006-10-27 16:29 UTC (permalink / raw)
To: alsa-devel
Just adding my experience from the test.
My system is a laptop, Compaq Presario V5204NR.
Here's some outputs:
root@1[mykrob]# lspci -s 0:1b -vn
0000:00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 103c:30a5
Flags: bus master, fast devsel, latency 0, IRQ 74
Memory at d0340000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
Capabilities: [70] #10 [0091]
root@1[mykrob]# cat /proc/asound/card0/codec#0
Codec: Conexant ID 5047
Address: 0
Vendor Id: 0x14f15047
Subsystem Id: 0x103c30a5
Revision Id: 0x100000
Default PCM: rates 0x040, bits 0x02, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1e 0x1e]
PCM: rates 0x040, bits 0x02, types 0x1
Power: 0x0
Node 0x11 [Audio Output] wcaps 0x611: Stereo Digital
PCM: rates 0x040, bits 0x02, types 0x1
Power: 0x0
Node 0x12 [Audio Input] wcaps 0x100d1b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
Amp-In vals: [0x0e 0x0e] [0x8e 0x8e] [0x8e 0x8e] [0x80 0x80] [0x80 0x80]
[0x80 0x80]
PCM: rates 0x040, bits 0x02, types 0x1
Power: 0x0
Connection: 6
0x19 0x14 0x15* 0x1a 0x16 0x10
Node 0x13 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1e 0x1e]
Pincap 0x081001c: OUT HP EAPD Detect
Pin Default 0xc3111010: [Both] Speaker at Ext Left
Conn = 1/8, Color = Black
Pin-ctls: 0xc0: OUT HP
Power: 0x0
Connection: 3
0x19* 0x10 0x16
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1f 0x1f]
Pincap 0x0833c: IN OUT HP Detect
Pin Default 0x03811011: [Jack] Line In at Ext Left
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Power: 0x0
Connection: 2
0x19* 0x16
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1f 0x1f]
Pincap 0x0833c: IN OUT HP Detect
Pin Default 0x03a11012: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Power: 0x0
Connection: 3
0x1c 0x19* 0x16
Node 0x16 [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x0860: IN
Pin Default 0x99330100: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x20: IN
Power: 0x0
Node 0x17 [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x08324: IN Detect
Pin Default 0xb7a00100: [Fixed] Mic at Oth Mobile-In
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
Node 0x18 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x21440100: [Jack] SPDIF Out at Sep Rear
Conn = RCA, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
Connection: 1
0x11
Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
Amp-In vals: [0x07 0x07] [0x80 0x80] [0x80 0x80] [0x17 0x17]
Power: 0x0
Connection: 4
0x10 0x1b 0x1a 0x16
Node 0x1a [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x1f, mute=0
Amp-Out vals: [0x00 0x00]
Power: 0x0
Connection: 3
0x15* 0x14 0x17
Node 0x1b [Audio Selector] wcaps 0x300501: Stereo
Power: 0x0
Connection: 2
0x14* 0x15
Node 0x1c [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
PCM: rates 0x040, bits 0x02, types 0x1
Power: 0x0
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1
Amp-Out vals: [0x1f 0x1f]
Pincap 0x08314: OUT Detect
Pin Default 0x90100112: [Fixed] Speaker at Int N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x40: OUT
Power: 0x0
Connection: 3
0x1c 0x19* 0x16
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
It seems i have a volume increase, but i am unable to record. I want to be able
to record using Ardour like i do on my other system.
thanks for all your work and help.
myk
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-10-27 16:29 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-10-27 16:29 Conexant Test Myk Robinson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox