Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Klaus Ethgen <Klaus@ethgen.ch>
Cc: alsa-devel@alsa-project.org
Subject: Re: [alsa-devel] CPU hook snd_hda_intel
Date: Sun, 08 Dec 2019 09:45:48 +0100	[thread overview]
Message-ID: <s5h4kybciir.wl-tiwai@suse.de> (raw)
In-Reply-To: <20191207200643.GA10092@ikki.ethgen.ch>

On Sat, 07 Dec 2019 21:06:43 +0100,
Klaus Ethgen wrote:
> 
> Hi Takashi,
> 
> Am Mi den  4. Dez 2019 um 17:31 schrieb Takashi Iwai:
> > I guess checking the perf output would give you more clue, e.g. which
> > function is hogging the CPU.  Without such information, it's very hard
> > to diagnose...
> 
> No problem, I just had the problem today again.
> 
> Find attached the perf output of the relevant event handler.

Thanks.  So it seems wasting in the busy loop for waiting for the
response from the codec.

How about a patch below?  It's untested, might break things, but at
least avoiding a busy loop.

BTW, if your machine is Coffeelake or Cannonlake, this patch wont'
work on the old branch because of forced polling mode.  It was removed
in 5.5-rc1, so please test with Linus tree at best.


Takashi

--- a/include/sound/hdaudio.h
+++ b/include/sound/hdaudio.h
@@ -317,6 +317,7 @@ struct hdac_bus {
 	struct hdac_rb corb;
 	struct hdac_rb rirb;
 	unsigned int last_cmd[HDA_MAX_CODECS];	/* last sent command */
+	wait_queue_head_t rirb_waitq;
 
 	/* CORB/RIRB and position buffers */
 	struct snd_dma_buffer rb;
diff --git a/sound/hda/hdac_bus.c b/sound/hda/hdac_bus.c
index 8f19876244eb..5eb58fce5353 100644
--- a/sound/hda/hdac_bus.c
+++ b/sound/hda/hdac_bus.c
@@ -43,6 +43,7 @@ int snd_hdac_bus_init(struct hdac_bus *bus, struct device *dev,
 	mutex_init(&bus->cmd_mutex);
 	mutex_init(&bus->lock);
 	INIT_LIST_HEAD(&bus->hlink_list);
+	init_waitqueue_head(&bus->rirb_waitq);
 	bus->irq = -1;
 	return 0;
 }
diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c
index 7e7be8e4dcf9..cd8fa9aa599d 100644
--- a/sound/hda/hdac_controller.c
+++ b/sound/hda/hdac_controller.c
@@ -216,6 +216,9 @@ void snd_hdac_bus_update_rirb(struct hdac_bus *bus)
 		else if (bus->rirb.cmds[addr]) {
 			bus->rirb.res[addr] = res;
 			bus->rirb.cmds[addr]--;
+			if (!bus->rirb.cmds[addr] &&
+			    waitqueue_active(&bus->rirb_waitq))
+				wake_up(&bus->rirb_waitq);
 		} else {
 			dev_err_ratelimited(bus->dev,
 				"spurious response %#x:%#x, last cmd=%#08x\n",
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index 2f3b7a35f2d9..56cafd12fa8a 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -792,21 +792,25 @@ static int azx_rirb_get_response(struct hdac_bus *bus, unsigned int addr,
 	struct hda_bus *hbus = &chip->bus;
 	unsigned long timeout;
 	unsigned long loopcounter;
-	int do_poll = 0;
+	wait_queue_entry_t wait;
 	bool warned = false;
 
+	init_wait_entry(&wait, 0);
  again:
 	timeout = jiffies + msecs_to_jiffies(1000);
 
 	for (loopcounter = 0;; loopcounter++) {
 		spin_lock_irq(&bus->reg_lock);
-		if (bus->polling_mode || do_poll)
+		if (!bus->polling_mode)
+			prepare_to_wait(&bus->rirb_waitq, &wait,
+					TASK_UNINTERRUPTIBLE);
+		if (bus->polling_mode)
 			snd_hdac_bus_update_rirb(bus);
 		if (!bus->rirb.cmds[addr]) {
-			if (!do_poll)
-				bus->poll_count = 0;
 			if (res)
 				*res = bus->rirb.res[addr]; /* the last value */
+			if (!bus->polling_mode)
+				finish_wait(&bus->rirb_waitq, &wait);
 			spin_unlock_irq(&bus->reg_lock);
 			return 0;
 		}
@@ -814,7 +818,9 @@ static int azx_rirb_get_response(struct hdac_bus *bus, unsigned int addr,
 		if (time_after(jiffies, timeout))
 			break;
 #define LOOP_COUNT_MAX	3000
-		if (hbus->needs_damn_long_delay ||
+		if (!bus->polling_mode) {
+			schedule_timeout(msecs_to_jiffies(2));
+		} else if (hbus->needs_damn_long_delay ||
 		    loopcounter > LOOP_COUNT_MAX) {
 			if (loopcounter > LOOP_COUNT_MAX && !warned) {
 				dev_dbg_ratelimited(chip->card->dev,
@@ -829,19 +835,12 @@ static int azx_rirb_get_response(struct hdac_bus *bus, unsigned int addr,
 		}
 	}
 
+	if (!bus->polling_mode)
+		finish_wait(&bus->rirb_waitq, &wait);
+
 	if (hbus->no_response_fallback)
 		return -EIO;
 
-	if (!bus->polling_mode && bus->poll_count < 2) {
-		dev_dbg(chip->card->dev,
-			"azx_get_response timeout, polling the codec once: last cmd=0x%08x\n",
-			bus->last_cmd[addr]);
-		do_poll = 1;
-		bus->poll_count++;
-		goto again;
-	}
-
-
 	if (!bus->polling_mode) {
 		dev_warn(chip->card->dev,
 			 "azx_get_response timeout, switching to polling mode: last cmd=0x%08x\n",
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2019-12-08  8:46 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-02 18:47 [alsa-devel] CPU hook snd_hda_intel Klaus Ethgen
2019-12-04 16:31 ` Takashi Iwai
2019-12-07 20:06   ` Klaus Ethgen
2019-12-08  8:45     ` Takashi Iwai [this message]
2019-12-08 17:31       ` Klaus Ethgen
2019-12-09  7:10         ` Takashi Iwai
2019-12-09  8:57           ` Klaus Ethgen
2019-12-09  9:27             ` Takashi Iwai
2019-12-09  9:45               ` Klaus Ethgen
2019-12-10 14:32               ` Klaus Ethgen
2019-12-10 14:35               ` Klaus Ethgen
2019-12-10 14:43                 ` Takashi Iwai
2019-12-10 15:10                   ` Klaus Ethgen
2019-12-10 15:19                     ` Takashi Iwai
2019-12-10 15:28                       ` Klaus Ethgen
2019-12-23 17:18                       ` Klaus Ethgen
2019-12-23 22:14                         ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5h4kybciir.wl-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=Klaus@ethgen.ch \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox