Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Kailang <kailang@realtek.com>
Cc: " (alsa-devel@alsa-project.org)" <alsa-devel@alsa-project.org>
Subject: Re: HP mute led for ALC286
Date: Wed, 19 Nov 2014 12:27:41 +0100	[thread overview]
Message-ID: <s5h8uj71lci.wl-tiwai@suse.de> (raw)
In-Reply-To: <6FAB7C47BCF00940BB0999A99BE3547A179FB7CA@RTITMBSV09.realtek.com.tw>

At Wed, 19 Nov 2014 07:13:16 +0000,
Kailang wrote:
> 
> Hi Takashi,
> 
> I had sent the discussion mail about the DMI string for HP.
> But no body response.
> So, I just send the patch to fix this issue.

I'd like to avoid the duplicated open codes, so could you try the
patch below and rewrite your patch to follow this?  You'd just need to
set like:
  spec->gpio_mute_led_mask = 0x02;
  spec->gpio_mic_led_mask = 0x20;
  pec->mute_led_polarity = 0;
then you can use the existing alc_fixup_gpio_mute_hook and
alc_fixup_gpio_mic_mute_hook.


thanks,

Takashi

-- 8< --
From: Takashi Iwai <tiwai@suse.de>
Subject: [PATCH] ALSA: hda/realtek - Clean up mute/mic GPIO LED handling

There are a few duplicated codes handling the mute and mic-mute LEDs
via GPIO pins.  Let's consolidate to single helpers.  Here we
introduced two new fields to alc_spec, gpio_mute_led_mask and
gpio_mic_led_mask, to contain the bit mask to set/clear.  Also,
mute_led_polarity is evaluated as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 81 +++++++++++++++++++++----------------------
 1 file changed, 40 insertions(+), 41 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 1af917f58a70..3c29a558e7db 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -96,6 +96,8 @@ struct alc_spec {
 	hda_nid_t cap_mute_led_nid;
 
 	unsigned int gpio_led; /* used for alc269_fixup_hp_gpio_led() */
+	unsigned int gpio_mute_led_mask;
+	unsigned int gpio_mic_led_mask;
 
 	hda_nid_t headset_mic_pin;
 	hda_nid_t headphone_mic_pin;
@@ -3235,41 +3237,45 @@ static void alc269_fixup_hp_mute_led_mic2(struct hda_codec *codec,
 	}
 }
 
-/* turn on/off mute LED per vmaster hook */
-static void alc269_fixup_hp_gpio_mute_hook(void *private_data, int enabled)
+/* update LED status via GPIO */
+static void alc_update_gpio_led(struct hda_codec *codec, unsigned int mask,
+				bool enabled)
 {
-	struct hda_codec *codec = private_data;
 	struct alc_spec *spec = codec->spec;
 	unsigned int oldval = spec->gpio_led;
 
+	if (spec->mute_led_polarity)
+		enabled = !enabled;
+
 	if (enabled)
-		spec->gpio_led &= ~0x08;
+		spec->gpio_led &= ~mask;
 	else
-		spec->gpio_led |= 0x08;
+		spec->gpio_led |= mask;
 	if (spec->gpio_led != oldval)
 		snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
 				    spec->gpio_led);
 }
 
-/* turn on/off mic-mute LED per capture hook */
-static void alc269_fixup_hp_gpio_mic_mute_hook(struct hda_codec *codec,
-					       struct snd_kcontrol *kcontrol,
-					       struct snd_ctl_elem_value *ucontrol)
+/* turn on/off mute LED via GPIO per vmaster hook */
+static void alc_fixup_gpio_mute_hook(void *private_data, int enabled)
 {
+	struct hda_codec *codec = private_data;
 	struct alc_spec *spec = codec->spec;
-	unsigned int oldval = spec->gpio_led;
 
-	if (!ucontrol)
-		return;
+	alc_update_gpio_led(codec, spec->gpio_mute_led_mask, enabled);
+}
 
-	if (ucontrol->value.integer.value[0] ||
-	    ucontrol->value.integer.value[1])
-		spec->gpio_led &= ~0x10;
-	else
-		spec->gpio_led |= 0x10;
-	if (spec->gpio_led != oldval)
-		snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
-				    spec->gpio_led);
+/* turn on/off mic-mute LED via GPIO per capture hook */
+static void alc_fixup_gpio_mic_mute_hook(struct hda_codec *codec,
+					 struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_value *ucontrol)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (ucontrol)
+		alc_update_gpio_led(codec, spec->gpio_mic_led_mask,
+				    ucontrol->value.integer.value[0] ||
+				    ucontrol->value.integer.value[1]);
 }
 
 static void alc269_fixup_hp_gpio_led(struct hda_codec *codec,
@@ -3283,9 +3289,12 @@ static void alc269_fixup_hp_gpio_led(struct hda_codec *codec,
 	};
 
 	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
-		spec->gen.vmaster_mute.hook = alc269_fixup_hp_gpio_mute_hook;
-		spec->gen.cap_sync_hook = alc269_fixup_hp_gpio_mic_mute_hook;
+		spec->gen.vmaster_mute.hook = alc_fixup_gpio_mute_hook;
+		spec->gen.cap_sync_hook = alc_fixup_gpio_mic_mute_hook;
 		spec->gpio_led = 0;
+		spec->mute_led_polarity = 0;
+		spec->gpio_mute_led_mask = 0x08;
+		spec->gpio_mic_led_mask = 0x10;
 		snd_hda_add_verbs(codec, gpio_init);
 	}
 }
@@ -3327,9 +3336,11 @@ static void alc269_fixup_hp_gpio_mic1_led(struct hda_codec *codec,
 	};
 
 	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
-		spec->gen.vmaster_mute.hook = alc269_fixup_hp_gpio_mute_hook;
+		spec->gen.vmaster_mute.hook = alc_fixup_gpio_mute_hook;
 		spec->gen.cap_sync_hook = alc269_fixup_hp_cap_mic_mute_hook;
 		spec->gpio_led = 0;
+		spec->mute_led_polarity = 0;
+		spec->gpio_mute_led_mask = 0x08;
 		spec->cap_mute_led_nid = 0x18;
 		snd_hda_add_verbs(codec, gpio_init);
 		codec->power_filter = led_power_filter;
@@ -3348,9 +3359,11 @@ static void alc280_fixup_hp_gpio4(struct hda_codec *codec,
 	};
 
 	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
-		spec->gen.vmaster_mute.hook = alc269_fixup_hp_gpio_mute_hook;
+		spec->gen.vmaster_mute.hook = alc_fixup_gpio_mute_hook;
 		spec->gen.cap_sync_hook = alc269_fixup_hp_cap_mic_mute_hook;
 		spec->gpio_led = 0;
+		spec->mute_led_polarity = 0;
+		spec->gpio_mute_led_mask = 0x08;
 		spec->cap_mute_led_nid = 0x18;
 		snd_hda_add_verbs(codec, gpio_init);
 		codec->power_filter = led_power_filter;
@@ -5624,22 +5637,6 @@ static void alc_fixup_bass_chmap(struct hda_codec *codec,
 	}
 }
 
-/* turn on/off mute LED per vmaster hook */
-static void alc662_led_gpio1_mute_hook(void *private_data, int enabled)
-{
-	struct hda_codec *codec = private_data;
-	struct alc_spec *spec = codec->spec;
-	unsigned int oldval = spec->gpio_led;
-
-	if (enabled)
-		spec->gpio_led |= 0x01;
-	else
-		spec->gpio_led &= ~0x01;
-	if (spec->gpio_led != oldval)
-		snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
-				    spec->gpio_led);
-}
-
 /* avoid D3 for keeping GPIO up */
 static unsigned int gpio_led_power_filter(struct hda_codec *codec,
 					  hda_nid_t nid,
@@ -5662,8 +5659,10 @@ static void alc662_fixup_led_gpio1(struct hda_codec *codec,
 	};
 
 	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
-		spec->gen.vmaster_mute.hook = alc662_led_gpio1_mute_hook;
+		spec->gen.vmaster_mute.hook = alc_fixup_gpio_mute_hook;
 		spec->gpio_led = 0;
+		spec->mute_led_polarity = 1;
+		spec->gpio_mute_led_mask = 0x01;
 		snd_hda_add_verbs(codec, gpio_init);
 		codec->power_filter = gpio_led_power_filter;
 	}
-- 
2.1.3

  reply	other threads:[~2014-11-19 11:27 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <s5hr3x9qz5j.wl-tiwai@suse.de>
     [not found] ` <6FAB7C47BCF00940BB0999A99BE3547A179FB004@RTITMBSV09.realtek.com.tw>
     [not found]   ` <s5h8ujgrext.wl-tiwai@suse.de>
2014-11-12 10:02     ` ALC1150 COEF Kailang
2014-11-12 10:32       ` Takashi Iwai
2014-11-19  7:13     ` HP mute led for ALC286 Kailang
2014-11-19 11:27       ` Takashi Iwai [this message]
2014-11-20  7:04         ` Kailang
2014-11-20 10:05           ` Takashi Iwai
2014-11-21  7:56             ` Kailang
2014-11-21  9:59               ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5h8uj71lci.wl-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=kailang@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox