alsa-driver will not compile with kernel 2.6.9-rc2-mm4-S7

alsa-driver will not compile with kernel 2.6.9-rc2-mm4-S7

[Lee Revell]

At first I thought my build was incorrect, but I reproduced this error
with a clean build and ALSA CVS from today:

  CC [M]  /home/rlrevell/cvs/alsa/alsa-driver/kbuild/../acore/pcm_native.o
/home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c:3202:57: macro "io_remap_page_range" requires 5 arguments, but only 4 given
/home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c: In function `snd_pcm_lib_mmap_iomem':
/home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c:3200: error: `io_remap_page_range' undeclared (first use in this function)
/home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c:3200: error: (Each undeclared identifier is reported only once
/home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c:3200: error: for each function it appears in.)
make[3]: *** [/home/rlrevell/cvs/alsa/alsa-driver/kbuild/../acore/pcm_native.o] Error 1
make[2]: *** [/home/rlrevell/cvs/alsa/alsa-driver/kbuild/../acore] Error 2
make[1]: *** [_module_/home/rlrevell/cvs/alsa/alsa-driver/kbuild] Error 2
make[1]: Leaving directory `/home/rlrevell/kernel-source/linux-2.6.9-rc2-mm4-S7'
make: *** [compile] Error 2

I am not sure if this is an ALSA issue or -mm4.  I suspect -mm4 because
-mm3-S6 worked.  The VP patch does not seem to be involved.

Lee

Re: alsa-driver will not compile with kernel 2.6.9-rc2-mm4-S7

[Rui Nuno Capela]

Lee Revell wrote:
> At first I thought my build was incorrect, but I reproduced this error
> with a clean build and ALSA CVS from today:
>
>   CC [M]  /home/rlrevell/cvs/alsa/alsa-driver/kbuild/../acore/pcm_native.o
> /home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c:3202:57: macro
> "io_remap_page_range" requires 5 arguments, but only 4 given
> /home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c: In function
> `snd_pcm_lib_mmap_iomem':
> /home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c:3200: error:
> `io_remap_page_range' undeclared (first use in this function)
> /home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c:3200: error: (Each
> undeclared identifier is reported only once
> /home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c:3200: error: for
> each function it appears in.)
> make[3]: ***
> [/home/rlrevell/cvs/alsa/alsa-driver/kbuild/../acore/pcm_native.o] Error 1
> make[2]: *** [/home/rlrevell/cvs/alsa/alsa-driver/kbuild/../acore] Error 2
> make[1]: *** [_module_/home/rlrevell/cvs/alsa/alsa-driver/kbuild] Error 2
> make[1]: Leaving directory
> `/home/rlrevell/kernel-source/linux-2.6.9-rc2-mm4-S7'
> make: *** [compile] Error 2
>
> I am not sure if this is an ALSA issue or -mm4.  I suspect -mm4 because
> -mm3-S6 worked.  The VP patch does not seem to be involved.
>
> Lee
>

Good grief! I'm having this too, and I was desperate thinking I was the
only one, and ultimately offering the blame to gcc 3.4.1 which is what I'm
test-driving now on my laptop (Mdk 10.1c).

Now I remember that -mm4 has some issue about remap_page_range kernel
symbol being renamed to something else, which is breaking the build of
outsider modules (i.e. not the ones bundled under the kernel source tree).
Or so it seems.

Maybe someone on the lkml may have a clue and help here?
-- 
rncbc aka Rui Nuno Capela
rncbc@rncbc.org



-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl

io_remap_page_range (was Re: [Alsa-devel] alsa-driver will not compile with kernel 2.6.9-rc2-mm4-S7)

[Lee Revell]

On Fri, 2004-10-01 at 20:34, Rui Nuno Capela wrote:
> Lee Revell wrote:
> Good grief! I'm having this too, and I was desperate thinking I was the
> only one, and ultimately offering the blame to gcc 3.4.1 which is what I'm
> test-driving now on my laptop (Mdk 10.1c).
> 
> Now I remember that -mm4 has some issue about remap_page_range kernel
> symbol being renamed to something else, which is breaking the build of
> outsider modules (i.e. not the ones bundled under the kernel source tree).
> Or so it seems.

Looking through my archives I cannot find a report of this exact issue,
but you are probably right.  Looks like ALSA drivers need to be updated.

Lee

Re: io_remap_page_range (was Re: [Alsa-devel] alsa-driver will not compile with kernel 2.6.9-rc2-mm4-S7)

[Takashi Iwai]

At Fri, 01 Oct 2004 20:51:08 -0400,
Lee Revell wrote:
> 
> On Fri, 2004-10-01 at 20:34, Rui Nuno Capela wrote:
> > Lee Revell wrote:
> > Good grief! I'm having this too, and I was desperate thinking I was the
> > only one, and ultimately offering the blame to gcc 3.4.1 which is what I'm
> > test-driving now on my laptop (Mdk 10.1c).
> > 
> > Now I remember that -mm4 has some issue about remap_page_range kernel
> > symbol being renamed to something else, which is breaking the build of
> > outsider modules (i.e. not the ones bundled under the kernel source tree).
> > Or so it seems.
> 
> Looking through my archives I cannot find a report of this exact issue,
> but you are probably right.  Looks like ALSA drivers need to be updated.

The alsa-kernel code there (pcm_native.c) is ok but the patch in
alsa-driver looks broken for the recent change of remap_pfn_range().

Also, there was another API brekage about pci_save/restore_state().

Fixed both on CVS now.


Takahsi

Re: io_remap_page_range (was Re: [Alsa-devel] alsa-driver will not compile with kernel 2.6.9-rc2-mm4-S7)

[Lee Revell]

On Mon, 2004-10-04 at 11:26, Takashi Iwai wrote:
> At Fri, 01 Oct 2004 20:51:08 -0400,
> Lee Revell wrote:
> > 
> > On Fri, 2004-10-01 at 20:34, Rui Nuno Capela wrote:
> > > Lee Revell wrote:
> > > Good grief! I'm having this too, and I was desperate thinking I was the
> > > only one, and ultimately offering the blame to gcc 3.4.1 which is what I'm
> > > test-driving now on my laptop (Mdk 10.1c).
> > > 
> > > Now I remember that -mm4 has some issue about remap_page_range kernel
> > > symbol being renamed to something else, which is breaking the build of
> > > outsider modules (i.e. not the ones bundled under the kernel source tree).
> > > Or so it seems.
> > 
> > Looking through my archives I cannot find a report of this exact issue,
> > but you are probably right.  Looks like ALSA drivers need to be updated.
> 
> The alsa-kernel code there (pcm_native.c) is ok but the patch in
> alsa-driver looks broken for the recent change of remap_pfn_range().
> 
> Also, there was another API brekage about pci_save/restore_state().
> 
> Fixed both on CVS now.

I think this is still broken.  Same problem when I went to configure
ALSA for -mm3-T3.  The configure script gets
CONFIG_HAVE_OLD_REMAP_PAGE_RANGE wrong; I have the new version but
configure fails to detect it.

AFAICT the test in configure is a NOOP and
CONFIG_HAVE_OLD_REMAP_PAGE_RANGE always gets set to 1.

Lee

Re: io_remap_page_range (was Re: [Alsa-devel] alsa-driver will not compile with kernel 2.6.9-rc2-mm4-S7)

[Lee Revell]

On Fri, 2004-10-08 at 15:23, Lee Revell wrote:
> On Mon, 2004-10-04 at 11:26, Takashi Iwai wrote:
> > At Fri, 01 Oct 2004 20:51:08 -0400,
> > Lee Revell wrote:
> > > 
> > > On Fri, 2004-10-01 at 20:34, Rui Nuno Capela wrote:
> > > > Lee Revell wrote:
> > > > Good grief! I'm having this too, and I was desperate thinking I was the
> > > > only one, and ultimately offering the blame to gcc 3.4.1 which is what I'm
> > > > test-driving now on my laptop (Mdk 10.1c).
> > > > 
> > > > Now I remember that -mm4 has some issue about remap_page_range kernel
> > > > symbol being renamed to something else, which is breaking the build of
> > > > outsider modules (i.e. not the ones bundled under the kernel source tree).
> > > > Or so it seems.
> > > 
> > > Looking through my archives I cannot find a report of this exact issue,
> > > but you are probably right.  Looks like ALSA drivers need to be updated.
> > 
> > The alsa-kernel code there (pcm_native.c) is ok but the patch in
> > alsa-driver looks broken for the recent change of remap_pfn_range().
> > 
> > Also, there was another API brekage about pci_save/restore_state().
> > 
> > Fixed both on CVS now.
> 
> I think this is still broken.  Same problem when I went to configure
> ALSA for -mm3-T3.  The configure script gets
> CONFIG_HAVE_OLD_REMAP_PAGE_RANGE wrong; I have the new version but
> configure fails to detect it.
> 
> AFAICT the test in configure is a NOOP and
> CONFIG_HAVE_OLD_REMAP_PAGE_RANGE always gets set to 1.

Nope, sorry, it works now.  But, I did cvs update, make clean, ./build
prep then configure and I was still hitting the bug.  I was only able to
fix it by deleting my working directory and checking out again.  I don't
think "make clean" cleans everything up.

Lee

Re: [Alsa-devel] alsa-driver will not compile with kernel 2.6.9-rc2-mm4-S7

[Lee Revell]

On Fri, 2004-10-01 at 21:13, Lee Revell wrote:
> For now unset CONFIG_OLD_REMAP_PAGE_RANGE and it should work.  Not yet
> tested.

Yup, this works.  Trivial patch:

--- alsa-driver/configure~	2004-09-29 16:05:19.000000000 -0400
+++ alsa-driver/configure	2004-10-01 21:14:20.000000000 -0400
@@ -6629,7 +6629,7 @@
 CFLAGS=$ac_save_CFLAGS
 if test "$new_remap" != "1"; then
   cat >>confdefs.h <<\_ACEOF
-#define CONFIG_OLD_REMAP_PAGE_RANGE 1
+#undef CONFIG_OLD_REMAP_PAGE_RANGE
 _ACEOF
 
 fi

Lee

Re: [Alsa-devel] alsa-driver will not compile with kernel 2.6.9-rc2-mm4-S7

[Florian Schmidt]

On Fri, 01 Oct 2004 20:12:10 -0400
Lee Revell <rlrevell@joe-job.com> wrote:

> At first I thought my build was incorrect, but I reproduced this error
> with a clean build and ALSA CVS from today:
> 
>   CC [M] 
>   /home/rlrevell/cvs/alsa/alsa-driver/kbuild/../acore/pcm_native.o
> /home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c:3202:57: macro
> "io_remap_page_range" requires 5 arguments, but only 4
> given/home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c: In
> function
> `snd_pcm_lib_mmap_iomem':/home/rlrevell/cvs/alsa/alsa-driver/acore/pc
> m_native.c:3200: error: `io_remap_page_range' undeclared (first use in
> this
> function)/home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c:3200:
> error: (Each undeclared identifier is reported only
> once/home/rlrevell/cvs/alsa/alsa-driver/acore/pcm_native.c:3200:
> error: for each function it appears in.) make[3]: ***
> [/home/rlrevell/cvs/alsa/alsa-driver/kbuild/../acore/pcm_native.o]
> Error 1 make[2]: ***
> [/home/rlrevell/cvs/alsa/alsa-driver/kbuild/../acore] Error 2 make[1]:
> *** [_module_/home/rlrevell/cvs/alsa/alsa-driver/kbuild] Error 2
> make[1]: Leaving directory
> `/home/rlrevell/kernel-source/linux-2.6.9-rc2-mm4-S7' make: ***
> [compile] Error 2
> 
> I am not sure if this is an ALSA issue or -mm4.  I suspect -mm4
> because-mm3-S6 worked.  The VP patch does not seem to be involved.


Hmm, i have no problems compiling the alsa drivers included with the
kernel [yes, i'm on mm4-S7]..

tapas@mango:~$ gcc --version
gcc (GCC) 3.3.4 (Debian 1:3.3.4-13)

flo

Re: [Alsa-devel] alsa-driver will not compile with kernel 2.6.9-rc2-mm4-S7

[Florian Schmidt]

On Sat, 2 Oct 2004 13:47:32 +0200
Florian Schmidt <mista.tapas@gmx.net> wrote:

> > I am not sure if this is an ALSA issue or -mm4.  I suspect -mm4
> > because-mm3-S6 worked.  The VP patch does not seem to be involved.
> 
> 
> Hmm, i have no problems compiling the alsa drivers included with the
> kernel [yes, i'm on mm4-S7]..
> 
> tapas@mango:~$ gcc --version
> gcc (GCC) 3.3.4 (Debian 1:3.3.4-13)

oops misread. sorry..

flo

Re: alsa-driver will not compile with kernel 2.6.9-rc2-mm4-S7

[Rui Nuno Capela]

Florian Schmidt wrote:
>
> Hmm, i have no problems compiling the alsa drivers included with the
> kernel [yes, i'm on mm4-S7]..
>

It's not about the regular modules in kernel source tree. Those are built
OK here too. We're talking about building the alsa-kernel + alsa-driver
tandem from ALSA CVS.

Cheers.
-- 
rncbc aka Rui Nuno Capela
rncbc@rncbc.org



-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl